Top Complete Tool Tray Reviews

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

[Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
Use this silicone tool tray for your workshop and garage.
[No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
Ridges in center compartment keep tools in place.
[Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
[Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
[Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
Package includes 1 flexible non slip tool holder for your workshop.

Check Stock

Dorman 801-600 Fuel Line Repair Tech Tray

Cost-effective replacement - saves time and money by replacing only the damaged section. No more difficult manipulation of entire fuel lines.
Steel line to nylon line adapters - allows an old steel fuel line to be repaired with updated nylon line.
Complete tech tray - straight and elbow connectors included to tackle the most popularapplications.
Exclusive features - includes updated tool included for 45°, 90° and 180° connectors.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

ABN Flexible Tool Tray, 3pk - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 3 Sizes

[Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray 3 Pack to hold parts and tools for you.
Use each silicone tool tray for your workshop and garage.
[No More Slippage]: Save time and energy using these parts tray containers to prevent the dropping of your parts and tools.
Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
[Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
Each flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included variety of pockets, notches, holes, and ridges for your tools and parts.
[Flexible Silicone Rubber]: No need to worry about these non slip flexible tool organizer caddies falling apart after extended, repeated use.
Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
[Perfect Size]: Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
Package includes 3 flexible non slip tool mats.
Mats included measure 10.5 x 5.5, 10 x 9, and 21 x 14 inches (26 x 13, 25 x 22, 53 x 35cm).

Check Stock

Capri Tools Combination Wrench Set with The Mechanic's Tray, Metric 6 to 24 mm, 19-Piece (CP11390MT)

Premium Chrome Vanadium steel forged with a complete 10-step state of the art heat treatment process, constructed for serious professionals in high torque environment.
Flawless chrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance.
12-point WaveDrive box end transfers torque uniformly and prevents damaging and rounding of the bolt, 15-degree offset for knuckle clearance and working in tight spots.
Constructed longer than most other standard-pattern wrenches, giving you more leverage and access to hard to reach areas.
Complete 19-piece metric set: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm. Comes in our own spill-resistant Mechanics Tray for easy organization and storage. Tray dimensions: 15-3/4 in. (L) x 11-3/8 in. (W) x 1-1/4 in. (H), fits comfortably in most tool chests and cabinets.

Check Stock

Tool Sorter Pliers Organizer – Black

ROLLING TRAY: Our rolling trays keep your tools handy wherever you're working.
These tray tables are ideal tools for mechanics.
ADJUSTABLE HEIGHT: Portable tool tray is adjustable from 33.5 inches to 49.2 inches.
Features an EVA foam work surface (29 inches x 20 inches) with three built in small parts / tool organizers.
DURABLE FINISH: Portable work table features rubber bumper corners to prevent scratching to vehicles as the mechanics table is moved around your workspace, and a durable powder coated finish for additional longevity.
ALL STEEL CONSTRUCTION: Tool tray cart features an all steel construction that will help it stand up to challenging shop environments.
Durability, organization, portability, everything you could want in a mechanic's work table.
BUILT TO LAST: With an all-steel body, four rugged casters, a powder-coat finish, EVA foam work space, and high-quality welds, this mechanic tool tray is built to last.

Check Stock

Metaltech CISTR Jobsite Series 6' Baker Tool Tray

UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter Pliers Organizer holds up to 11 pliers. It helps unclutter your toolbox and create more room for even more tools.
ORGANIZE YOUR TOOLS – Tool Sorter Pliers Tray organizes your tool chest. Tools are easily visible and your tool box drawer will look clean and organized.
RECLAIM SPACE – The compact Tool Sorter Pliers Tray saves tons of space, creating more room for even more tools. Tray measures 13 x 10 x 1.25 inches.
STORE A VARIETY OF TOOLS – Tool Caddy holds a variety of tools, including adjustable wrenches, metal files, chisels, etc. Graduated compartments and open end give flexibility for tools of varying dimensions.
MADE IN THE USA – All Tool Sorter Organizers are tough built right here in the USA.

Check Stock

Tool Sorter Screwdriver Organizer – Black

✅ SCREWDRIVERS ORGANIZED – This screwdriver tray organizes your screwdrivers in a logical way. Quickly and easily find the right tool. No more rifling through your tool drawer looking for the right tool.
✅ CLEARLY SEE EACH SCREWDRIVER – This screwdriver organizer gives you easy identification without confusion over type and size. Each tool has its spot and you will see clearly if a tool is missing.
✅ UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter screwdriver tray holds up to 16 screwdrivers. It helps unclutter your toolbox and create more room for even more tools.
✅ FITS MOST TOOLBOX DRAWERS – Low profile tray fits even shallow drawers giving you greater flexibility. Measures 13" x 10" x 1".
✅ BUILT TOUGH IN USA – All Tool Sorter products are made of the highest quality materials and crafted right here in the USA. They will stand up to your projects.

Check Stock

Ridgid 16703 TRISTAND Portable Chain Pipe Vise

Features a quick grab, self-locking latch and carrying handle for easy transport.
Complete with pipe rest, 3-pipe benders, slots for hanging tools and ceiling brace screw.
Integral legs and tray fold in for easy carrying and setup.
Large vise base overhangs the front legs for a clear tool swing.
Chain pipe vise has a 1/8-inch to 2-1/2-inch (3 mm to 60 mm) pipe capacity.

Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
Quickly identify the right tool every time with this tool socket organizer.
Additional 1/2 inch socket organizer tray to accommodate any socket collection.
FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
Anodized black finish creates a sleek toolbox appearance.
NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
Our socket set organizer is designed to meet your needs.
INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
Subtle socket set tray organizer design means they fit easily in any storage drawer.
TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
(2) 1/2” socket holders organizers for tool box measure 12” x 3”.
The socket organizer for tool box drawer has adjustable studs.

Check Stock

BIG RED Torin Padded Vinyl Rolling Creeper Garage Workshop Workbench Stool w/Pneumatic Height Adjustment and Tool Tray Black

GREAT FOR MECHANICS: Versatile design is great for the garage, workshop, warehouse, and more.
FULLY MOBILE: 360-degree rotating 2.5-inch swivel casters provide smooth, go-anywhere mobility.
TOOL STORAGE: Built-in molded tool tray base lets you keep your hardware and equipment organized and close by.
ADJUSTABLE HEIGHT: Heavy-duty steel frame features a pneumatic lever for easy height adjustment up to 4.5 inches.
COMFY SEAT: Round seat padded with soft foam and upholstered in vinyl for complete comfort.

Check Stock

Magnet Flexible Reuseable

Tool tray is made of high-quality silica gel, beautiful in appearance and anti-static.. Including three specifications, Small: 10.8” x 5.7”.
Non-slip flexible tool tray can effectively organize your tools. Fasteners, hammers, wrenches, sockets, drill bits, nuts, bolts and other tools that....
The high heat resistance and flexibility of the non-slip flexible tool tray can make it suitable for various working environments, whether it is....
Non-slip flexible tool trays have good heat resistance, they are non-magnetic, and will not attract metal chips. They are resistant to oil and....
Easy to clean, a small amount of soap and water will make it new again. If you encounter more troublesome situations, you can even use a brake....

Check Stock

6PCS Socket Organizer Tray Set, Red SAE & Black Metric Socket Storage Trays, 1/4-Inch, 3/8-Inch & 1/2-Inch Drive Deep and Shadow Socket Holders for Toolboxes

ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly.
TOOL BOX SOCKET ORGANIZER: Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
Sockets organizer stores shallow and deep-well sockets.
LONG-LASTING SOCKET STORAGE: This lightweight socket organizer for toolboxes is made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
Durable socket organizer tray for toolbox storage is designed with professionals in mind.
ORGANIZED WORKSPACE: Toolbox organizer tray posts are clearly labeled with measurements for easy identification.
Never misplace another socket with this labeled socket organizer.
Our plastic socket holder cleans up cluttered tool boxes and workspaces.
COMPREHENSIVE SAE AND METRIC SOCKET HOLDER SET: 1/8” - 5/8”, 4mm - 15mm (1/4" drive socket organizers).
1/4” - 1”, 6mm - 20mm (3/8 socket organizer).

Check Stock

OEMTOOLS 26052 Magnetic Foldable Tray, 4 Pack Collapsible Bowl Set for Small Parts and Tools, Silicone Tray, Red, Blue, Orange, and Green Magnetic Tool Tray Set

FLEXIBLE MAGNETIC TOOL: These magnetic bowls for holding nuts and bolts collapse and expand to increase magnetic tray depth for adding additional objects or discrete parts storage.
Ideal magnetic tray set for mechanics, plumbers, carpenters, and more.
SECURE ATTACHMENT: Our collapsible tray set features a base with strong magnets, providing a secure hold to most metal surfaces while securing metal parts and tools inside each small parts holder.
Non-marring magnetic screw tray set leaves no damages.
EASY IDENTIFICATION: This magnetic parts tray set includes multiple colors, allowing for easy color coding of parts and convenient organization that will help speed up projects.
Set of trays comes with blue, orange, green, and red collapsible bowls.
SILICONE TOOL TRAY SET: Our magnetic screw holder set features magnetic tool trays that are made of high tensile silica, ensuring this small parts tray set lasts as long as you need.
Each magnetic bowl for screws is resistant to most harmful fluids.
CONVENIENT STORAGE: Each nut and bolt tray has a compact profile for easy and convenient storage when the collapsible bowls set is not in use.
Each magnetic bolt tray quickly expands when needed and holds up to 2 lbs. of tools and parts.

Check Stock