Top Combo Xlr Connector Reviews

Mogami Gold 8-Channel DB25-DB25 Analog Snake 3 ft.

  • Model #: SAAB-6x25 | 6 Channel 25 Foot XLR 1/4 Inch Combo to XLR Male Fantail Sub Stage Snake Cable.
  • Connectors (Box): XLR 1/4 Inch Combo Jack Connectors | Connectors (Fantail): High-Quality XLR Male Connectors.
  • Stage Box and Fantail are numerically labeled.
  • 100% individually shielded pairs | 28AWG copper conductors for each Channel.
  • Low Profile Compact Steel Stage BoxHeavy-Duty Metal mesh strain relief | Heavy-Duty Metal Joint on each end for Durability and extra strain relief for each fantail.
Check Stock

Sony ECM77B Electret Condenser Lavalier Microphone, Black

  • Omni-directional lavalier condenser microphone with AA battery power supply and XLR connector.
Check Stock

Tabletop Microphone Adjustable Gooseneck

  • Momentary switch for priority paging & lock down switch for continuous use.
  • 3-Way Toggle Switch, Sensitivity: high-53dB±3dB low-71dB±3dB.
  • Locking Toggle for Continuous Use.Impedance: low-600 ohms high-50kHz.
  • 6” gooseneck extension and 5’ cord.XLR Connector with 5' Coil Cord,Cannon 3 pin XLR male connector.
Check Stock

Sony Digital Bluetooth Wireless Microphone ECMW2BT

  • Omni-directional lavalier condenser microphone with AA battery power supply and XLR connector.
Check Stock

Sony ECM-44 Omni-Directional Electret Condenser Wired Lavalier Microphone

  • Omni-directional lavalier condenser microphone with AA battery power supply and XLR connector.
Check Stock

Seismic Audio - SAMP-12x4x100-12 Channel, 100 Foot XLR Snake Cable with Multi Pin Easy Disconnect Trunk for Recording, Stage, Studio use

  • ➤ EASIER MATCHING & TRACKING - XLR patch cable in different color coding, helping you to easily track or match the other connector for microphones, mixing board, patch bays..
  • ➤High Quality -Balanced Recording Snakes Cable, 4 channel female XLR & male XLR connectors, 24 Gauge Copper Wire, each XLR channel is also shielded with flexible rubber jackets. The XLR connection provides for a balanced line that lessens the possibility of hum and buzz.
  • ➤ SHIELDED RUBBER WIRE - Premium Shielded Audio Frequency Control Patch Cable Snake, Flexible rubber booty takes care of the thin branch cable gently..
  • ➤ Standard XLR Connector - Heavy-duty connector of metal both plug and screwing cap, high-quality shield wire, treats cable in a more carefree manner. its works as a custom-made live drum snake. accommodate 4 Mic's in karaoke setup.
  • ➤ WIDE USE - Extension Snake for Live, Recording, Studios, and Gigs, The XLR connectors make this snake cable well-suited with professional power amps, mixing consoles, and many other pro audios and DJ equipment.
Check Stock

TISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 3.3ft/1m

  • ...ight stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
  • XLR male connector has molded strain relief to support the weight of the cable.
  • 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
  • 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
  • Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibility and durability performance.
Check Stock

TISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 1.6ft/50cm

  • ...ight stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
  • XLR male connector has molded strain relief to support the weight of the cable.
  • 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
  • 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
  • Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibility and durability performance.
Check Stock

TISINO 3.5mm to Dual XLR Stereo Cable 1/8 inch Mini Jack to 2 XLR Male Y Splitter Adapter Cord- 10 FT

  • These cables are designed to split a 3.5mm (1/8" aux) balanced / stereo signal into two unbalanced / mono XLR signals (left and right channels). They are ideal for connecting your iPod / iPad / iPhone / PC / Laptop to a Mixer/Speakers or similar device..
  • The XLR connectors are color coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 7.5 inches. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on an iPhone or Android phone which has 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipmant is "OFF" when changing connections..
  • XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity.
  • Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.DescriptionTISINO 10 FT Gold Plated 1/8" TRS Stereo to Dual XLR male Y-Splitter Cable.
  • This cable is designed to connect an audio device with a mini stereo phone o....
Check Stock

Toronce DMX to RJ45 Connector RJ45 Ethernet to 3 Pin XLR DMX Female & Male Adapter Sets （3PIN_1Pair）

  • XLR to RJ45 adapter – Use a CAT-5 Ethernet cable to make a DMX512 cable..
  • XLR To J45 is an adapter to convert a DMX512 XLR connector to a RJ45 connector..
  • The adapter makes it possible to use any CAT-5 ethernet cable as a DMX512 cable..
  • XLR To J45 adapter is available in four versions, 3-pin male or female XLR or 5-pin male or female XLR..
  • The different adapters can be mixed to make for example a 5-pin to 3-pin cable. XLRJ45 is very useful for making a DMX512 cable quickly.
Check Stock

Cable Matters (1/8 Inch) 3.5mm to XLR Cable 10 ft Male to Male (XLR to 3.5mm Cable, XLR to 1/8 Cable, 1/8 to XLR Cable)

  • Unbalanced XLR to 1/8 cable connects an iPhone, iPod, MP3 player, tablet, laptop, or voice recorder to a mixing console or powered speakers.
  • Connect a smartphone with headphone jack to XLR input.
  • Connect a tablet using an instrument App into a mixing console for a performance.
  • XLR to Aux cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed.
  • The 1/8 to XLR cable provides a quick and convenient solution to connect many devices with the common mini phone jack to mixing and speaker equipment with XLR female ports.
  • Pro grade performance with oxygen-free copper (OFC) conductors to deliver pristine sound.
  • Bare copper braided shielding provides maximum cancellation of hum and noise.
  • Polyethylene insulation improves high frequency response.
  • Robust construction includes a flexible PVC jacket with gold-plated connectors in a rugged metal housing.
  • XLR male connector has molded strain relief to support the weight of the connector.
  • 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability.
  • 3.5 to XLR compatible with a mixing console or powered speakers such as the Behringer EUROLIVE or Behringer Xenyx.
Check Stock

KONDOR BLUE 16' Mini XLR Male to XLR Female Audio Cable for BLACKMAGIC Pocket 4K/6K Camera Video Assist | Pro XLR Adapter for Microphones & Mixers. (Black, 16' | 1 Pack)

  • Connectors: 3-Pin Mini-XLR Male to 3-Pin XLR Female.
  • Connect a microphone or audio mixer to your Camera with this Mini-XLR Male to XLR Female Audio Cable..
  • This cable connects to the camera's input with the 3-pin mini-XLR male connector, and on the other end is a standard 3-pin XLR female connector to plug into your mic or mixer..
  • Cord Length: Length: 13.4” Total Length: 16".
Check Stock

Seismic Audio Speakers Dual XLR Male and Female Connectors, Stainless Steel Wall Plate

  • Stainless Steel Wall Plate: Sturdy and robust, the wall plate is made of stainless steel which looks classic yet modern..
  • Dual XLR Wall Plate: This wall plate has two connectors, an XLR male connector and an XLR female connector, which is excellent for permanent cable installation..
  • Audio Connectors: It is a must have for all audio or video technicians. It fits over the standard electrical box. High quality connectors make these wall plates worry free!.
  • XLR Wall Plate: These wall plates are durable and have a professional look. The XLR connection is screwed on, making it easily serviceable..
  • Size and Other Details: The dimensions of the wall plate are 4 " X 2 and mounting screws are included!.
Check Stock