Top Collated Nail Reviews

Metabo HPT Framing Nailer Pneumatic Accepts 30 Degree Paper Strip Collated Clipped Head Nails and 30 Degree Paper Strip Collated Offset Round Head Nails 2-Inch to 3-1/4-Inch NR83AA5

  • AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine.
  • FASTENERS: Accepts both 30 degree paper strip collated clipped head nails and 30 degree paper strip collated offset round head nails from 2" - 3-1/4" in length and .113-.131 in nail diameter for ultimate convenience.
  • choose contact or single sequential actuation mode via switch in the trigger.
  • RAFTER HOOK: Can be positioned on left or right side depending on user preference.
  • EASY LOAD: Rear loading magazine for quick replenishment.
Check Stock

SENCO FASTENING SYSTEMS HC27APBX 2.5K 3x.120 Frame Nail

  • 3" x 120 Clipped Head, Smooth Shank, Bright, Basic Paper Tape, 34 Degree, Collated Framing Nail.
  • Fewer tool jams when using Serco nails compared to competitive products.
Check Stock

SENCO FASTENING SYSTEMS KC27APBX 2.5K 3x.131 Frame Nail

  • 3" x 131 Smooth, Bright, Basic Clipped Head, 34 Degree, Paper Tape, Collated Framing Nail.
  • Fewer tool jams when using Serco nails compared to competitive products.
Check Stock

BOSTITCH Coil Siding Nailer, 15-Degree (N75C-1)

  • The sliding nail gun is perfect for high-volume nailing of wall and roof sheathing.
  • The siding nailer drives 15 degree wire weld collated and plastic inserted nails with shank diameters of .090-inch - .131-inch.
  • The coil siding nailer has a lightweight aluminum design for durability.
  • Adjustable depth guide sets nails to desired depths quickly and conveniently.
Check Stock

DEWALT 20V MAX* Framing Nailer, 21-Degree, Plastic Collated, Tool Only (DCN21PLB)

  • DEWALT cordless framing nailer has dual-speed motor optimized to drive a wide range of fasteners for versatility.
  • Framing nailer gun has tool-free selector switch for sequential or bump-fire modes.
  • Tool-free depth adjustment for precise nail placement.
  • High-strength aluminum magazine with easy-to-operate pusher latch.
  • Stall release lever to reset driver blade in the event of a jam.
  • Easy access to the nosepiece for removing jammed nails.
  • Dry fire lock out prevents tool from firing when nails are low.
  • 21degree magazine holds up to 49 plastic collated nails.
  • Capable of driving 0.0148-inch diameter nail into dense lumber.
Check Stock

DEWALT 20V MAX Framing Nailer Kit, 21-Degree, Plastic Collated (DCN21PLM1)

  • DEWALT cordless framing nailer has dual-speed motor optimized to drive a wide range of fasteners for versatility.
  • Framing nailer gun has tool-free selector switch for sequential or bump-fire modes.
  • Tool-free depth adjustment for precise nail placement.
  • High-strength aluminum magazine with easy-to-operate pusher latch.
  • Stall release lever to reset driver blade in the event of a jam.
  • Easy access to the nosepiece for removing jammed nails.
  • Dry fire lock out prevents tool from firing when nails are low.
  • 21degree magazine holds up to 49 plastic collated nails.
  • Capable of driving 0.0148-inch diameter nail into dense lumber.
Check Stock

Stanley Bostitch S8DR-FH 8D FH RS Nail, 2000-Count

  • 2-3/8" x 120 Ring Shank, 28 Degree, Wire Weld, Full Head Stick Framing Nail.
  • Fits Bostitch model #F28WW, True Value #632556, and other Bostitch models N80SB, and N88WW.
  • For use with both cordless, and pneumatic framing nailers.
Check Stock

Interchange Pro NSC90-34PRO 34-Degree 3-1/4 Paper Tape Collated Clipped Head Framing Nailer w/Adjustable Depth

  • 15 Degree 2-1/2" Wire Weld / Plastic Collated Round Head Coil Siding Nailer.
  • APPLICATIONS: Heavy duty, high-powered coil siding nail gun is ideal for siding, sheathing, exterior trim, and wood fence building..
  • FASTENERS: up to 400 nail capacity magazine fires 15 degree plastic or wire welded coil round head roofing nails..
  • DURABILITY: Rugged design, tested and manufactured to the highest standards to withstand the demands of the professional..
  • LIGHTWEIGHT: Well-balanced, and weighing in at only 5.5 lbs., the Interchange coil nailer allows for ease of maneuverability and reduces hand and shoulder fatigue..
Check Stock

Makita AN924 21º Full Round Head 3-1/2\ Framing Nailer

  • Faster nail driving speed for maximum performance.
  • Large capacity air chamber for increased power to drive nails up to 3-1/2" X. 148 in diameter.
  • Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and. 113 too. 148 in diameter.
  • Solid top-loading aluminum MAGAZINE for longer life.
Check Stock

Siding Nails 1-1/2-Inch x .092-Inch 15-Degree Collated Wire Coil, Full RoundHead, Ring Shank Hot-Dipped Galvanized 1600 Count for Rough Nailing of Lathing and Sheathing Materials by BOOTOP

  • 1-1/2-Inch x 0.092-Inch Collated Wire Coil Siding Nails,Wire coil, full round head siding nail, 15 Degree,Hot dipped galvanized, ring shank. For Rough Nailing of Lathing and Sheathing Materials..
  • These .092-inch wire collated nails are 1-1/2-inch (38mm) long. Package includes 1,600 nails to ensure you have plenty on hand (Package contains 4 rolls of nails, each roll of which is 400 pieces)..
  • Corrosion Protection: Hot dipped galvanized fiber cement material offers superior corrosion protection in all pressure treated lumber..
  • 1-1/2 Siding Nails, coil siding nails 1 1/2, they feature an annular ring shank increases withdrawal resistance to provide a secure attachment that reduces cupping of siding boards..
  • Feel free to contact us if you have any problems, and we'll do our best to help you!.
Check Stock

SimCos 23 Gauge Stainless Steel Pin Nails Headless Pinner Nails 2/5 ,3/5 ,4/5 ,1 ,1-3/8 assorted 5 sizes for Molding Cabinetry Building Assembly 5000

  • 【Various 5 sizes 】 5 different sizes, 2/5 inch, 3/5 inch, 4/5 inch, 1 inch and 1-3/8 inch. The multi-size assortment will meet your different needs. Per stick: 100..
  • 【Made of Stainess steel】The headless nails are made of the great stainless steel, strong rust & corrosion resistance, sturdy and not easy to break, with good toughness and tensile strength, which are smooth and bright on the surface with no nail jamming, it fits most of 23 gauge pinner nail guns..
  • 【Multiple packaging protection】Use PP plastic box and Polyethylene foam package for the pin nails, give the small nails multiple packaging protection, make sure our customers get the complete nail product..
  • 【Use easily】 The headless pin nails are collated flat, which will not cause clogging easily, helping you more accurately and more convenient to push out the nails.
  • 【Wide applications】The nail assortment can be used for various craft projects with different sizes, suitable for repairing handicrafts, cabinet building, woodworking, repairing shoes, fences and other DIY home improvement projects..
Check Stock

DEWALT Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (D51257K)

  • Sealed lube dual tech: motor works as an oil free and oil lube unit..
  • Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust.
  • Uses 1-inch to 2-1/2-inch (25.4 milimeter-65 milimeter) 16 gauge straight collated nails,.
  • Includes carrying case and sample finish nails ( safety glasses are not included.).
Check Stock

NailPro Stainless Steel 2 Angled Finish Nails for Paslode -2,000 pieces - 16 Gauge - 20 Degree Tape Collated - Smooth Shank - Brad Head

  • Nail Pro Angled Finish Nails 2" - 2,000 pieces.
  • Designed for Many Paslode & Guns and Similar.
Check Stock