Top Cobalt Magnet Reviews

TOYO-INTL 2200LBS Lift Electric Hoist Crane Remote Control Power System with Emergency Stop Switch Electric Winch Zinc-Plated Steel Wire Hoist for Garage Ceiling Crane Overhead (2200LBS)

• ...ecked and sorted in our factory. We guarantee every product was made under ISO 9001 Quality Systems!.
• ✔ VERSATILE USE- After a precise simulation and calculation, this super strong neodymium 300 lb fishing magnet was endowed with a strong capability for salvaging of various materials, including nickel iron, steel, cobalt and their alloys underwater, lawn, grass, yard, garage and new house. This fishing magnet is great choice for lifting, hanging, and retrieving. Leisure time, go and have a fun to searching odds and ends like coin, gun, screw driver, knife, hooks, fasteners, nails, metals….
• ✔ Super strong Loctite thread locker 263 glue has been added to the connection place of eyebolt and steel base, every buyer don’t need to buy a new bottle of thread locker by yourself and you don’t have to worry of losing magnet during the fishing..

Neosmuk Fishing Magnet, 245 lb Pull Strong Magnets Heavy Duty Big Rare Earth Magnet, 1.75” Large Magnet for Remover, Super Neodymium High Power Magnet with Handle for Tag, Shop, Lifting and Pick up

• ...ecked and sorted in our factory. We guarantee every product was made under ISO 9001 Quality Systems!.
• ✔ VERSATILE USE- After a precise simulation and calculation, this super strong neodymium 245 lb fishing magnet was endowed with a strong capability for salvaging of various materials, including nickel iron, steel, cobalt and their alloys underwater, lawn, grass, yard, garage and new house. This fishing magnet is great choice for lifting, hanging, and retrieving. Leisure time, go and have a fun to searching odds and ends like coin, gun, screw driver, knife, hooks, fasteners, nails, metals….
• ✔ Super strong Loctite thread locker 263 glue has been added to the connection place of eyebolt and steel base, every buyer don’t need to buy a new bottle of thread locker by yourself and you don’t have to worry of losing magnet during the fishing..

J.W. Winco 55.3-AN-15-60 GN55.3 Rod-Shaped Raw Magnet, 0.59\ Diameter, 2.36\ Length, Aluminum, Nickel and Cobalt Combination AlNiCo Magnet

• Magnet: Aluminum, nickel and cobalt combination AlNiCo.

Magnetic Pin Cushion with 200 PCS Sewing Pins, Round Plastic Magnetic Sewing Cushion, Magnetic Pin Holder for Sewing Needles Push Pins Hair Bobby Pins (Red)

• PACKAGE INCLUDES: Magnetic pin cushion and 200pcs sewing pins. This is a cost-effective combination..
• POWERFUL MAGNET: Magnetic sewing cushion made of plastic. There is a strong magnet in the middle of the pincushion. Magnets can sweep pins from a distance and quickly arrange them in neat piles..
• FINISHING TOOL: Magnetic pin holder is an ideal finishing tool, it is not like the traditional cloth needle cushions, do not need to insert a needle into the needle cushions. It saves you time..
• MULTIPURPOSE: As long as your small item is made of iron, cobalt, nickel and steel, it can be adsorbed. Used to collect paper clips, nails, screws, or other metal objects safely in one space..
• WHAT YOU GET: Magnetic pin cushion * 1, 200pcs sewing pins * 1, our 7*24 friendly customer service for peace of mind..

AZ Industries, Inc. Cast Alnico 5 Cow Magnet, 1/2\ Diameter x 3\ Long, Ground Finish on Diameter. 5- Pack

• ~1/2" Diameter x 3" Long with the magnetic poles at the two ends. They are a solid casting and the diameter is ground to size..
• Made from powerful Alnico Magnet Material (Aluminum/Nickel/Cobalt) which was developed in the early 1930's..
• These magnets handle high temperatures and are resistant to demagnetization..
• These magnets are non-toxic and non-corrosive in regular use..

SP Bel-Art Spinbar Teflon Octagon Magnetic Stirring Bar; 50.8 x 8mm, White (F37110-0002)

• Octagonal shape creates more turbulence and a stronger vortex than a round, cylindrical shape or a polygonal shape.
• Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
• Built-in pivot ring helps reduce vibration and wear during stirring.
• Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
• Casing material is approved for use in food, drug, and cosmetic applications.

MagMaster | Magnetic Tool Holder - Strong Clip-On Belt Magnet Holster for Screws, Nails, Hammer, Sockets, Pliers, Screw Driver, Trowel, Drill Bit, Wrench, or Any Magnetic Tools and Hardware

• YOUR THIRD HAND | Free your hands while you work! MagMaster firmly holds your tools or hardware. Clip-on easily to belts, pants, pockets, backpack, vest, or tool bags..
• SUPER STRONG MAGNET | Capable of holding heavy tools like sledgehammers, cast Iron skillets, and pipe wrenches..
• HOLDS A WIDE RANGE OF TOOLS | Channel lock, hammer, fistful of screws, 11-in-1- screwdriver, flat pry bar, bolts, flashlight, keys, putty knife scraper, cat paw nail puller, bolts, socket wrench, bottle opener, trowel, garden snips, painters tool and any tools made with steel, iron, cobalt or nickel..
• SMARTPHONE SAFE | Smartphones have solid-state memory that will not be affected by the magnet..
• CLIP-ON AND GO | Comes with a low-profile belt clips that fit belts up to 1.75 inches (45mm). A great addition to your tool belt or by itself when you want to lighten your load..
• BUILT FOR THE TRADES | Versatile tool and hardware holster saves you from setting down tools or digging in your tool bags. Great for an electrician, contractor, plumber, HVAC, carpenter, maintenance tech, rigger, lineman, landscaper, handyman, and more!.
• ASSEMBLED IN IDAHO, USA | Durable holster Kydex frame, 100% polycarbonate 1.75" (45mm) belt clip, and Neodymium N52 magnet in a hard rubber cap..

Cobalt Rounds (1 Pound | 99.9+% Pure) Raw Cobalt Metal by MS MetalShipper

• ✔️ Cobalt Rounds (1 Pound | 99.9+% Pure) Our Cobalt Rounds are all sourced directly from the Vale Mining Group in Canada where they are produced and are 100% “virgin” metal (not recycled). We sell this metal by the pound, so if you need 10lbs, simply add a quantity of 10 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per pound..
• ✔️ USAGE - This is very high purity cobalt that can be confidently used in any application where cobalt is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Our 1lb of cobalt rounds - each cobalt round is approximately 1.25 inches in diameter and .25 inches thick..
• ✔️ SPECIFICATIONS - Atomic Number = 27 | Melting Point (F) = 2723 | Atomic Mass= 58.93 | Boiling Point (F) = 5275 | Density (g/cm3) = 8.9 | Analysis: COBALT 99.9974%, NICKEL 0.0950%, OXYGEN 0.0050%, CARBON 0.0025%..
• ✔️ PACKAGING - This 1lb of cobalt rounds will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Drill Hog 37 Pc Cobalt Drill Bit Set Index M42 1/16" - 1"

SP Bel-Art Spinbar Teflon Elliptical (Egg-Shaped) Magnetic Stirring Bar; 41.3 x 19mm, White (F37130-0158)

• Egg shape (also called an elliptical shape) has a rounded pivot point to reduce friction, for use in round containers.
• Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
• Smooth surface provides quicker cleanup and less risk of cross-contamination than bars with pivot rings.
• Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
• Casing material is approved for use in food, drug, and cosmetic applications.

SP Bel-Art Spinbar Teflon Micro (Flea) Magnetic Stirring Bar; 3 x 3mm, White (F37119-0003)

• Round, cylindrical shape provides better centering and creates less turbulence than a multisided shape.
• Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
• Smooth surface provides quicker cleanup and less risk of cross-contamination than bars with pivot rings and allows the bar to spin on the bottom of the container to disperse light sediment and air bubbles.
• Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
• For stirring small volumes of liquid in containers such as test tubes, vials, and gradients.

J.W. Winco 58-AN-19 GN58 Pot Magnet Assembly with Thru Hole, 0.75\ Diameter, 0.15\ Thru Hole, 0.30\ Thickness, Steel/Aluminum Housing, Nickel and Cobalt Combination AlNiCo Magnet (AN Type), Red Lacquered Finish

• Housing: Steel, Magnet: Aluminum, nickel and cobalt combination AlNiCo Red lacquered finish.

Drill America - DWDCOFP12 F Cobalt Drill Bit (Pack of 12), DWDCO Series

• 13 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
• 135-Degree split point for accurate centering and fast penetration.
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.