Top Coaxial Bnc Connector Reviews

onelinkmore BNC Female to Dual Banana Male Plug Jack Binding Posts RF Coaxial Adapter BNC to BNC Male Banana Coax Jack Splitter Connector Pack of 2…

  • Type: BNC to BNC Banana Male Plug Coaxial Adapter Binding Post RF Coax Coaxial Splitter Connector.
  • Binding posts facilitate connections of test leads or additional components,Used for adapting single BNC Plug to Dual Banana Jack and Provides....
  • Function: One side is BNC Female with inner bore, and the other side is two banana Male plug binding posts, used for connecting BNC to Banana RF....
  • Widely used for Antennas, Coaxial cable, LMR, Wireless LAN Devices,Connections can be made to the binding posts by spade lugs, banana plugs or wire....
  • 2 Pieces BNC to Banana Binding Post Plug Connector included.
Check Stock

MOOKEERF BNC Male Crimp Connector BNC Q9 Male Plug Crimp Connector for RG8X LMR240 4D-FB Mini8 Coax Cable Pack of 10

  • [Specification] - BNC male crimp connectors for rg8x/lmr240 coax cable| Impedance: 50 Ohm | Operating frequency: 0-1000MHz..
  • [Low Loss ] - The attenuates signal of this bnc crimp connector is less than 0.1db. at 500MHZ VSWR< 1.15. It can be combined with lmr240/rg8x coaxial....
  • [Well Made] - This lmr240 bnc male connector is made of brass gold-plated pins and Teflon insulators，which has good signal transmission....
  • [Compatibility]- This bnc male crimp connector works great for RG8X, LMR240,KMR240,4D-FB,belden9258,CNT240,Mini8 low loss coaxial cable or similar rf....
  • [Application] -BNC male connectors suitable for CB-ham radios, CB radios, two-way radios, bnc receiver antennas, antenna extension, radio scanner,....
Check Stock

SABRENT 1080P 60Hz 3D HDMI Extender 164 Feet Over RJ45 Connector CAT6/6A/7 HDMI Repeater,Support uncompressed audio, For Xbox PS5/4/3/ Roku orFire Stick.Pass through remote IR Range 20~60KHz (DA-HDEX)

  • 【ATTENTION】IT IS NOT A VIDEO BALUN, AND IT CAN NOT WORK WITH REGULAR POE SWITCH OR REGULAR POE IPC. It can ONLY be used to work together with EOC-Switch04, Dahua ePOE switch or Dahua ePOE IP cameras.
  • 【ETHERNET/IP/POWER OVER COAX ADAPTER】This Ethernet Over Coax adapter is used to convert RJ45 to BNC connector, or BNC connector to RJ45, which supports long range power supply transmission via coaxial cable. It provides one BNC coaxial port and one RJ45 port.
  • 【WORK WITH EOC SWITCH04 OR EPOE SWITCH】This EOC adapter can be used as RJ45 to BNC connector at the dahua ePOE switch side. When being used for upgrading analog surveillance system to IP surveillance system, the other side should be connected with EOC Transmitter. The whole connection should be ePOE switch—EOC adapter—coaxial cable—EOC transmitter—IP cameres.
  • 【WORK WITH DAHUA EPOE IPC】This EOC adapter can be used for connecting dahua ePOE Cameras via coaxial cable (Requires ePOE Switch or ePOE NVR at another side). And the whole connection should be ePOE switch—EOC adapter—coaxial cable—EOC adapter—ePOE cameres.
  • 【24/7 US LOCAL + GLOBAL TECH SUPPORT】Every LINOVISION product comes with 2-year warranty, 24/7 Life-time US LOCAL + GLOBAL Tech Support. Free system consultan....
Check Stock

Universal Oscilloscope Probe Kit, 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • 1 x BNC to double-headed alligator clip test line.
  • 1 x BNC to double-head test hook test line.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz..
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function..
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • 1 x BNC to double-headed alligator clip test line.
  • 1 x BNC to double-head test hook test line.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Universal Oscilloscope Probe with Accessories Kit 200MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • 1 x BNC to double-headed alligator clip test line.
  • 1 x BNC to double-head test hook test line.
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

SDTC Tech SMA Male to BNC Male RF Coaxial Cable RG316 Pigtail Jumper Coax Antenna Extender BNC Connector Adapter (20 inch)

  • SMA to BNC RF Coax Cable, Usually used in Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna etc..
  • Type: RF Coaxial Connector Adapter, Patch Cord, Refit Cable, Wire Jumper.
  • Cable: Military quality RG316 cable, approx. 20 inch..
  • Connector Material: Copper conductor, great connectivity, to ensure high quality communication..
  • Package Include: 1x 20 inch SMA male to BNC male cable..
Check Stock

Tecreddy CB Radio Antenna Soft Whip BNC & PL259 Male CB Antenna with Magnetic Base Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Car Mobile Radio Scanner

  • Compatible with all handheld CB radios with a BNC or UHF connector, improve quality and range to CB radio reception. Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C..
  • This soft whip antenna can be removed and installed directly on the CB radio for use. The antenna design is soft, flexible and durable. It can also be used on a magnetic base. Both usages are very convenient..
  • Antenna&Cable Connector Type: BNC Male Connector.
  • Cable Connector Type: BNC Male Connector.
  • Accessories: UHF PL-259 Male to BNC Female Connector.
  • Package Includes: 1 x Antenna, 1 x Magnetic Base, 1 x Connector.
Check Stock

[4 CONNECTORS] BNC Male Coax Connector for 50 Ohm RG8/X Belden 9258 and Times Microwave LMR-240 Coaxial Antenna RF Cable - Coaxial Cable Connector

  • BNC Male Crimp Coax Cable Connector for 50 Ohm Coaxial Cable.
  • BNC Male Connector For Ham, CB & Radio Antenna Connections.
  • Connectors are Milled Brass with Nickel Plating for Durability.
  • This low loss Coaxial transmission line can be used in almost any application where good handling characteristics, improved shielding, and low loss is....
Check Stock

BOOBRIE BNC SMA Coax Connector SMA Male to BNC Female Coaxial Connector Low Loss Coax Adapter for RF Antennas, Wireless LAN Devices, Coaxial cable, WiFi, Ham or Handheld Radios, Scanner, SDR Pack of 2

  • Name: RF (Radio Frequency) coaxial connector, SMA male plug (pin) to BNC female jack (hole) low loss coaxial adapters. Connector Material: Copper with Great connectivity (Not Alloy). Surface treatment: Gold-plated. Impedance: 50 ohm, Low-loss.
  • Great for interphone, communication connecting user, commonly used in RF Applications, RF Antennas, Wireless LAN Devices , RF Coaxial cables, WiFi, Ham Radios, Handheld Radios, Scanner, SDR, >1000 Times Mating Life Time..
  • Help you connect BNC Male to SMA Female device, work for Vertex Icom Kenwood Baofeng Wouxun Two-way Radio, BCD 396XT scanner, BCD536HP scanners, Radioddity GD-77, Kenwood TH-F6A, Yaesu FT-70DR and so on..
  • Handy items when changing types of connectors during installations.
  • Package included: 2 pieces BNC Female to SMA Male Adapter. We provide 12 months warranty and return service after the original purchase date. If there are any manufacturing defects in this product, please do not hesitate to contact our customer service team..
Check Stock

MEIRIYFA S-Video 4 Pin to BNC Splitter Cable,4 Pin Mini DIN S-Video Male to 2 BNC Male Y Splitter Extension Adapter Cable,for Monitors Video Signal Transmission (4Pin to BNC Male), Black

  • S-VHS Y Adaptor converting S-Video to BNC, such as insert an amplifier into the s-video output from a camera to drive coax cables, displaying S-Video from a CCTV Camera..
  • BNC to S-Video 4 Pin Mini DIN Coaxial Video Power Cable. Connector 1: 4 PIN Mini-DIN Male ( S-Video connector ) Connector B: 2* BNC Male Y splitter cable.BNC center pin (gold plated).
  • If your video signal is from a BNC plug, such as security camera, but your monitor or TV input is SVHS Video signal, or you want to convert a SVHS Video with a BNC signal, this Mini Din 4 Pin Male to Dual BNC Male cable helps you..
  • MEIRIYFA S-Video 4pin to 2BNC Y cable adapter ideal for monitors, TV's, projectors, camcorders, VCRs, DVRs/PVRs, DVD players, and Oscilloscope other video devices Video signal transmission..
  • Note: The S-terminal line is a standard 4-pin thread for 4- and 7-hole S-terminal holes. (9-hole S-terminal hole is not available).
Check Stock

BNC Compression Connector RG6, Ancable 10-Pack BNC Cable Connectors for Coaxial Cable, SDI, HD SDI CCTV, Video Camera Systems and Surveillance Camera Installation

  • Wide Range of Applications, BNC RG6 Connectors are be used to work with RG6 coaxial cable, BNC audio video cable and for a variety of home security monitor, SDI, HD SDI CCTV, video camera systems and surveillance camera installation..
  • Easy to Use and Install, provide you a better way of connecting coaxial cable and smooth BNC connection..
  • Super Tight Seal, Metal body, nickel plated center conductor and rubber ends make rg6 cable connectors waterproof and weather sealed..
  • Cost-effective, Crimp male bnc connector comes with 10pcs, cost-effective and makes you always have a backup..
  • 100% Guarantee, All Ancable products come with 12 months warranty, you are protected with our 103% No Questions Asked Guarantee for either a replacement or refund.We care about only putting out high quality products that satisfy your needs..
Check Stock

Bingfu CB Antenna 27MHz Magnetic Base CB Radio Antenna BNC & PL259 Male CB Antenna Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Mobile Radio Police Scanner

  • Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz..
  • Antenna Mounting Connector Type: BNC Male Connector.
  • Feature: with 7cm Diameter Magnetic Base.
  • Cable Connector Type: BNC Male Connector.
  • Accessories: UHF PL-259 Male Connector Adapter.
  • Package List: 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter (As the Picture Shown).
  • Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C.
Check Stock