Top Coated Tile Reviews

Hillyard Super Shine-All® - 1 Gal.

  • The secret of SHINE-ALL is in its sixifold action: WETTING, PENETRATING, SUDSING, DISSOLVING, EMULSIFYING, AND SUSPENDING..
  • Concentrated, neutral pH formula won’t harm your floor finish. Protective sheen helps preserve and protect..
  • Perfect for cleaning resilient tile, asphalt tile, vinyl floors, synthetic floors, terrazzo, quarry tile, paver brick, natural stone and coated wood....
  • Excellent choice for damp mopping and auto scrubbing. Effective in hard or soft, hot or cold water. Biodegradable..
Check Stock

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade , White

  • 3.5” premium diamond coated cutting wheel for cutting wall tile & floor tile..
  • Cuts most tile and masonry materials with ease and precision..
  • Ability to also cut porcelain, slate, stone, cement backer board..
  • Compatible with all Dremel corded and cordless Ultra Saws..
Check Stock

Dremel US20V-02 Compact Circular Saw Kit with (2) 20V Batteries, Charger & Storage Bag, Cordless Compact Saw, 15,000 RPM - Ideal for Flush Cutting, Plunge Cutting and Surface Preparation

  • 3 in 1 compact saw allows for flush cutting, plunge cutting and surface preparation..
  • Cuts nearly all materials such as wood, metal, PVC, masonry and more..
  • Kit includes Swiss made, high-quality engineered 4" US500 premium carbide wood and plastic wheel..
  • Kit includes the 3.5" US510 Metal Cutting Wheel. Abrasive material for applications such as copper pipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum and more..
  • Kit includes the 3.5" US540 Diamond tile cutting wheel. Diamond coated for cutting wall tile, floor tile, porcelain, slate, stone, and cement backer board..
Check Stock

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
Check Stock

Christopher Knight Home Truda Outdoor 11 Inch Grey Finish Ceramic Tile Side Table, Black Metal

  • This ceramic tile side table with a powder coated iron frame is a wonderful addition to your patio, The iron frame combined with the tile table Top ensures that this side table can match any Décor you currently have without having to change anything, small and light weight enough to be moved around at a moments notice, enjoy this table in your backyard.
  • Includes: one (1) side table. Material: ceramic tile. Frame material: iron.
  • Tile finish: grey. Frame Finish: Black. No assembly required.
  • Hand crafted details. Dimensions: 10. 80 inches deep x 10. 80 inches wide x 18. 50 inches high.
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Microblend Interior Paint and Primer - Blue/Azuresque, Satin Sheen, Quart, Premium Quality, High Hide, Low VOC, Washable, Microblend Cabo Collection

  • Premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Use on Drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.
  • Apply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact.
  • Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer. Set of 2..
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

QEP 10630 Tile Cutter, Yellow

  • Rip cuts porcelain and ceramic tile up to 24-Inch and 16-Inch diagonally.
  • Straight edge adjustable me7/8-Inch titanium-coated tungsten-carbide cutting wheel for smooth and durable scoringasurement guide aligns tile for accurate cutting.
  • Easily cleaned with compressed air or soap and water if needed.
Check Stock

INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer, 1 Quart, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • 75 - 100 square foot coverage for interior or exterior use.
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

Bostik Blaze Urethane Haze & General Cleaner

  • REFINISH YOUR BATHROOM: Give your sink, tub or tile a fresh, long-lasting finish. Magic Spray-On Tub & Tile Refinishing Kit works great on ceramic, porcelain, fiberglass, enamel-coated cast iron and acrylic tile, tubs or sinks..
  • HIGH PERFORMANCE: Our one-part epoxy is specially formulated to stand up to moisture and make your fixtures look fantastic. Please note that this does carry a strong odor. We recommend wearing a mask and making sure the area is well ventilated..
  • COMPLETE INSTRUCTIONS: Let's be real. Refinishing your bathtub is a lot of work, but we think it's worth it in the long run. We'll give you a step-by-step guide that covers surface prep to final coats and clean-up. We'll even remind you to use a TSP cleaner and cover anything you don't want misted..
  • SAVE MONEY: Refinishing your bathroom can get costly quick. Magic Spray-On Tub & Tile Refinishing Kit is here to slash costs so you can make your bathroom look amazing without breaking the bank on new fixtures or a contractor..
  • COAT COVERAGE: This product provides two coats to an average size bathtub. It covers roughly 22 square feet..
Check Stock