Top Coated Steel Roofing Tile Reviews

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Sunjoy Odelia 40 in. Round Wood Burning Firepit Table

  • Brown rust-resistant powder-coated steel frame.
  • Black rust-resistant powder-coated steel mesh cover.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • ...e improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition bar with a powder coated finish to protect against rust and corrosion for long lasting quality. The ultimate in roofing tools, flooring tools, deck tools, and siding tools.
Check Stock

Shelter SCADJ-S Adjustable Clamp On Black Galvanized Steel Single Flue Chimney Cap,Small

  • Designed & Engineered to Bolt-On to Existing Clay Flue Tile.
  • Adjustable to fit outside flue tile sizes ranging from: 8 inch x 8 inch to 13 inch x 13 inch square/rectangle and 8 inch to 12 inch round.
  • 24 gauge powder-coated galvanized Steel hood with scalloped corners and roll-formed edges, 18 gauge 3/4 inch 100% galvanized Steel expanded metal mesh.
  • Steel mounting clamps for easy, durable installation. Outside mounting provides greater free air space..
Check Stock

Tramex Moisture Encounter - ME5

  • New, rugged ergonomically designed enclosure..
  • Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings..
  • Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting..
  • 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry.
  • Shallow Depth scale with field penetration of up to 0.4 inches.
Check Stock

Draft King CBO14 Round Bolt On Black Galvanized Steel Single Flue Chimney Cap, 14" Diameter

  • For masonry chimneys only. Not for use with air-cooled metal chimney systems. Fits outside tile (inches): 13.5 to 14.5 Round..
  • 24 gauge powder-coated galvanized Steel hood with scalloped corners and roll-formed edges, 18 gauge 3/4 inch 100% galvanized Steel expanded metal mesh.
  • Slotted hex-head Steel mounting bolts for easy, durable installation. Outside mounting provides greater free air space..
  • Expanded metal mesh turned inward at base allows cover to rest firmly on flue tile, closing any openings to protect against nuisance wildlife..
Check Stock

Ace Screws 3 Roofing Insulation Plates SKINNYnSTRONG - 1,000pc ,Goes with Self Tapping Fasteners into Metal and Wood Roof Decks Corrugated Roofing Commercial Insulation EPDM TPO PVC

  • ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
  • Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
  • SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
  • Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.
Check Stock

Toolman Premium Circular Saw Blade Universal Fit 4\ for Wood and Plastic Cutting STH019

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 13,300 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 12 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 300mm(12"), the incision thickness is approximately 3mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 5,059 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock

SHDIATOOL 14 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

  • Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
  • Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
  • Out diameter 350mm(14"), the incision thickness is approximately 3.2mm, Bore 25.4mm(1 In.) with pin hole.
  • The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 4,365 RPM.
  • Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.
Check Stock