Top Co2 Gas shield Welding Wire Reviews

INEFIL ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld.
  • Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding.
  • Mig solid welding wire for Carbon and Carbon-Manganese steels.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labor conditions.
  • Approvals: ABS, TUV, DB, DNV, LRS, RINA, GL.
Check Stock

Kiswel USA K-NGS E-71TGS 0.035in. Dia 10lb. Gasless-Flux Core Wire Welding wire Made in USA

  • TOP QUALITY: Share same manufacturer with the best US welding brand. Good quality plastic and wire. Protected with moisture-resistant plastic film..
  • EASY TO WELD: No stuck or tangle, Low spatter, High feedability, Porosity free, Good bead appearance..
  • LOW COST SHIELDING GAS: 80% Ar + 20% CO2 or 100% CO2, All Positions, Single and multi pass welding..
  • WIDE USE: Great for construction work, farm implement fabrication, shaft buildup, tanks, truck body and general applications with poor fit-up or rusty, oily plates..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

  • Argon Regulator for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
  • Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
  • Includes 5 Feet Argon Hose with 5/8"-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Flowmeter Hose with 5/8\-18 Male Connectors - 5 Feet Long

  • For its use with Flowmeters for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium.
  • 5 feet hose with 5/8"-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
  • 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber..
Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders - SÜA

  • Argon Regulator for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
  • Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...es an advanced IGBT inverter design. It has the following advantages: stable wire speed, high no-load voltage, with good compensation of arc force, easy arc starting, less spatter, stable current, and no electromagnetic noise. This machine has both voltage adjustment and current adjustment, which can provide better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contac....
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

MULMART 15FT M-150 M-15 M15 M150 MIG Welding Gun Welding Torch Stinger Replacement for Miller 150A,Millermatic 90, 35/120 / 130 / 130XP /135 / 140s / 150/175 / 180s /185,Hobart IronMan 210

  • 【Fitment】Premium Quality 150A 15-foot (4.5m) M-150 M-15 MIG Welding Gun Replacement for Miller 249041.
  • 【Compatibility】Usually M-150 (M-15) MIG gun can be used for Miller SideKick XL / Cricket XL / Millermatic90, Millermatic 35 / 120 / 130 / 130XP / 135 / 140s / 150 / 175 / 180s / 185 / DVIs /211, Challenger, Challenger 172, Pulser or Hobart IronMan 210.
  • Welding Wire Diameter:0.8mm~0.9mm(0.030"~0.035"Diameter Welding Wire).
  • Duty Cycle: 100% with CO2 Gas, 60% with Mixed Gas.
  • 【Feature】One-piece modular trigger assembly-Molded out of high heat resistant material to withstand head and spatter and ensure long life. Gun tube design-Armored with an electrically insulated metal jacket optimizing fine wire welding performance. Abrasion-resistant,extruded rubber jacket-Adds strength and long life to the cable. Classic curved handle-Lightweight and balanced, providing a comfortable grip to reduce fatigue.
  • 【Wide Applications】Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications....
Check Stock

YESWELDER ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • [ER70S-6] It's the most common wire of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding..
  • [Good Performance] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup..
  • [Applications] Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates..
  • [Brand-new Plate] Use new ABS materials, which are more durable and more resistant to falling than ordinary ones..
  • [Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm).
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock