Top Co rotating Screw Extruders China Reviews

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8 x11.8 x13.8

  • INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
  • THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
  • NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
  • EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
  • BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
  • prints can be extracted from the bed by hand following cool down.
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

TMCRAFT 170oz Mini Keg Growler, Pressurized Stainless Steel Home Keg Kit System with Adjustable Faucet Keeps Fresh and Carbonation for Homebrew, Craft and Draft Beer

  • 170OZ CAPACITY: Portable size is easy to transportation and storage. Measures 6.9"L x 9"W x 18"H & fits your home cooler/fridge. Large capacity is more suitable for gatherings..
  • ADJUSTABLE FAUCET: Adjustable faucet allows you can control the beer flow by rotating the knob to reduce unnecessary foam. And self closing designed faucet can avoid the unexpected beer dripping!.
  • KEEP YOUR BEER FRESH: Mini dispenser system can maintain vacuum pressure in the keg and keep beer fresh for few months, also the food grade stainless steel material keeps beer flavor..
  • CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulator supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED).
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations..
Check Stock

BIGTREETECH SKR PRO V1.2 3D Printer Control Board 32-bit CPU Mother Board Support TMC2208 Stepper Motor Driver TFT35 Touch Screen for 3D Printer Part

  • √1.【SKR PRO V1.2】：Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high....
  • √2. 【Main Chip】:The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance....
  • √3.【Easy to Use】:Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to....
  • √4.【Display】:BIGTREETECH-2.8-inchTFT, and BIGTREETECH-3.5-inchTFT color touch screens are compatible, as are LCD2004 and LCD12864 screens.
  • √5.【Dual Z】: Support for dual Z axis printers (series dual Z).
Check Stock

NutriChef - Pressurized Growler Tap System - Stainless Steel Mini Keg Dispenser Portable Kegerator Kit - Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - PKBRTP50 (64oz)

  • NEVER FLAT CRAFT BEER: A traditional growler will let beer go flat after the first pour. PKBRTP50 will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer kegging equipment enthusiast.
  • WORKS WITH DISPOSABLE CO2: Screw small threaded 16g CO2 cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system. Each cartridge will pump around 128oz of beer before depleting.
  • UPGRADED ADJUSTABLE REGULATOR: Monitor the mini keg growler’s current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer cold.
  • HEAVY DUTY STAINLESS STEEL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • 64oz TANK SIZE: Barrel is the same volume as traditional growlers and is laser marked at the fill level. Includes metal screw on lid for easy portable transportation and storage. 13.4” height fits in your home fridge.
Check Stock

TMCRAFT 64oz Growler Tap System, Pressurized Stainless Steel Mini Keg with Cooler Jacket, Portable Home Dispenser System to Keep Fresh and Carbonation for Draft, Homebrew and Craft Beer (Matte Black)

  • PORTABLE SIZE: 64oz capacity and the size of 7.7"L x 5.3"W x 13.6"H fits standard home cooler/fridge and easy to transport.
  • KEEP YOUR BEER FRESH: Pressurized mini keg system can maintain vacuum pressure in the keg and keep fresh of homebrew, draft and craft beer for few months, also the food grade stainless steel material keeps beer flavor.
  • UPGRADED REGULATOR: The upgraded regulator has a more accurate PSI degree, fine-tune pressure by rotating the adjustment knob can make the beer get perfect carbonation and head.
  • CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges3/8" Threadinto the regulation supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED).
  • COOLER JACKET: The insulated keg cooler fits 64oz mini keg, this jacket will keep your beer cold for 3 hours at room temperature. There is nothing more fun than drinking ice cold beer!.
Check Stock

TMCRAFT 128oz Growler Tap System, Pressurized Stainless Steel Mini Keg with Cooler Jacket, Portable Home Dispenser System to Keep Fresh and Carbonation for Draft, Homebrew and Craft Beer (Matte Black)

  • PORTABLE SIZE: 128oz capacity and the size of 7.7"L x 5.3"W x 18.3"H fits standard home cooler/fridge and easy to transport.
  • KEEP YOUR BEER FRESH: Mini dispenser system can maintain vacuum pressure in the keg and keep fresh of homebrew, draft and craft beer for few months, also the food grade stainless steel material keeps beer flavor.
  • UPGRADED REGULATOR: The upgraded regulator has a more accurate PSI degree, fine-tune pressure by rotating the adjustment knob can make the beer get perfect carbonation and head.
  • CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulation supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED).
  • MINI KEG COOLER JACKET: The insulated keg cooler fits 128oz mini keg, this jacket will keep your beer cold for 3 hours at room temperature. There is nothing more fun than drinking ice cold beer!.
Check Stock

TMCRAFT 128oz Mini Keg Growler Pressurized Stainless Steel Home Keg Kit System with Updated Co2 Regulator Keeps Fresh and Carbonation for Homebrew Craft and Draft Beer

  • 128OZ CAPACITY: Portable size is easy to transportation and storage. Measures 7.3"L x 5.3"W x 18.3"H & fits your home cooler/fridge.
  • STAINLESS STEEL MATERIAL: The mini keg tap dispenser kit is constructed w/ solid food grade stainless steel which keeps beer flavors and fresh,....
  • UPGRADED REGULATOR: Monitor the mini keg growler‘s current PSI from the regulator gauge more accurately and fine tune pressure by rotating the....
  • CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulator to maintains perfect carbonation. 16g capsule can tap 128OZ of beer.....
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to....
Check Stock

NutriChef Pressurized Mini Keg Beer Growler - Detachable Aluminum Regulator & Spout Easy Storage Under Pressure - Black Matte Powder Coated 64oz Pressurized Growler Homebrew Beer Dispenser - PKBRTP60

  • ... 304 stainless steel keg & Cap Spear, aluminum regulator & brass tap. Stylish Black matte powder coating & includes silicone O-Ring kit & 47.24″ Tubing.
  • Adjustable pressure regulator: adjust the beer carbonator mini keg growler current PSI from the regulator gauge and fine-tune pressure by rotating the knob to enjoy a perfect head on every beer. 30 psi, safety pressure regulated.
  • Works w/ disposable threaded Co2: not included – each 16g cartridge will pump around 128oz of beer before depleting Co2 cartridge. Screw universal threaded Co2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system.
Check Stock

Monoprice - 112504 Premium 3D Printer Filament 1.75MM 0.1kg/spool - Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens

  • Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!.
  • It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly..
  • It is also good to clean when switching filament colors or material types..
  • This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.
  • To clean using this filament, simply print about 12" of material. It prints at a wide 160 ~ 260C temperature range.
Check Stock

Quick CO2 Adapter for Soda Water Maker Compatible with Soda Stream DUO/Terra/Art, Quick Adapter for Connecting orginal blue CO2 Cylinder with TR21-4 Male Thread, CO2 refill adapter Accessories

  • Which Soda maker Compatible? Which Soda maker Compatible? Quick soda Adapter can be used only for 60L Original blue CO2 Cylinder with TR21-4 Male Thread,Other cylinders from other brands are not recommended.WHY? if the blue CO2 Cylinder is not original,including the valve, the Quick soda Adapter may not screw down far enough to work in the new soda maker..
  • Ingenious Threaded Design: CO2 refill adapter can connect old soda hose with TR21-4 Male Thread to new soda water maker. You can connect the soda water machine and Blue Co2 Cylinder by the Quick Soda Adapter also. You can use all CO2 cylinder types flexible.
  • Economical & High Quality: The soda adapter is made of high quality metal with polished surface, With The quick adapter, you can Choose CO2 cylinders to use with your soda maker freely..
  • Easy Installation: Check the Detailed installation steps, Your soda maker can be connected with this quick adapter by a few simple steps, Original blue CO2 Cylinder with screw can be reused.
  • 1 Year Warranty: The Quick Adapter for CO2 Soda Water Sparkler strictly tested. If You Are Not Satisfied, Please Contact Us For Replacement Or Refund..
Check Stock

Pro Bike Tool CO2 Inflator - Quick & Easy - Presta and Schrader Valve Compatible - Bicycle Tire Pump for Road and Mountain Bikes - Insulated Sleeve - No CO2 Cartridges Included (Black)

  • ...NY size of 'threaded' CO2 cartridges (12g, 16g, 20g & 25g). Rubber EVA Foam sleeve (for 16g cartridges only) included - no frozen fingers when operating. Detailed instructions included. Important note: Not compatible with valve extenders. For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem. No CO2 cartridges included, CO2 cartridges sold separately..
  • Save Money in The Long Term, Invest In The Best - Why spend money on a cheaper CO2 inflator which will inevitably fail when you need it the most! This CO2 inflator is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is built to last, so you can have a safe & enjoyable ride. Important: For safety reasons - do not screw in and store a CO2 cartridge into the inflator head until needed for operation. Care & respect should be taken when using CO2 gas..
  • Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement! We recommend only using premium quality threaded CO2 cartridges for 'best performance', such as PRO BIKE TOOL’s threaded 16g CO2 cartridges. Note: Using low quality CO2 cartridges with pote....
Check Stock