Top Cng Cylinder Valve Reviews

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

【Cylinder Bore】: 47mm / Non-EGR Cylinder.
【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.

Check Stock

Aluminum Can Crusher Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher Eco-Friendly Recycling Tool Countertop Button Valve

Air Cylinder Can Crusher, Just press the button of the valve to smash almost all kinds of aluminum cans..
Safe and relialbe: Safety mechanical valve used to avoid misoperation. a special rubber spacer is included to press the valve.
Sturdy and Durable: all steel material for the frame and piston, easy to crush any aluminum cans.
Bore ID of cylinder: 63mm, Stroke of Cylinder: 200mm, Maximum Can to be cushed: OD 2.8 inch,Height 7 inch.
Air compressor is needed to drive the Can crusher..

Check Stock

KIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.

...on locking to a pre-determind setting.
Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.

Check Stock

Cylinder Leak Down Tester Kit,Automotive Engine Pressure Gauges Compression Test Leakage Detector Tool Set TU-21

Features: it is used to detect many common faults of the engine, such as piston ring wear, cylinder head crack, valve wear and cylinder head seal....
General accessories: It is very suitable for testing trucks and models with minimum clearance. Check the leakage of the four stroke engine..
How the leak tester works: once the leak tester is connected to one of the cylinders, compressed air (45-100 psi) enters the cylinder through an....
Easy to operate: remove the Schrader Valve and close the regulator before using workshop air. Install the hose on the cylinder, install the device on....
Package: 48cm recoil hose, 12mm and 14mm spark plug adapters, fixed connector M14 x 26mm, fixed connector M16 x 26mm, pressure+cylinder leakage gauge,....

Check Stock

Coleman RoadTrip Swaptop Aluminum Grill Griddle, Full Size , black

[REFILL ADAPTER]: With this adapter, you can transfer the liquefied gas from one lindal valve cylinder to another lindal valve cylinder..
[VENT VALVE]: Empty the gas tank to recycle/dispose..
[MATERIAL]: Super Duralumin, Brass, Rubber..
[SIZE AND WEIGHT]: Folded: 1.8x1.4x0.6in(45*16*35mm), unfolded: 3.7x1.4x0.6in(94*16*35mm), weight: 0.07lb/36g. It is lightweight and easy to carry..
[PACKAGE MCLUDE]: Only 1xZ15 Adapter. The rest of the products in the picture are not included..

Check Stock

TOP NOTCH PARTS CYLINDER PISTON HEAD POLISHED PORT COVER CAM SHAFT CAMSHAFT FITS HONDA TRX400EX TRX 400EX 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

Replaces OEM Part # 14000-HN1-000, 13011-KCY-670, 13101-KCY-670, 12100-KCY-670, 12200-KCY-670, 12310-HN1-010.
FITS HONDA TRX 400EX CYLINDER BLOCK, CYLINDER HEAD POLISHED INTAKE AND EXHAUST PORT, VALVE COVER & PERFORMANCE CAMSHAFT.
CAMSHAFTDOES NOT USE THE AUTO-DECOMPRESSION MECHANISM.
PURCHASE INCLUDES: 1X CYLINDER HEAD. 1X VALVE COVER. 1X CYLINDER. 1X CAMSHAFT. 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X....

Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
each 50lb. cylinder makes from 10-16 blocks of dry ice.
Dry ice production can be viewed through the transparent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder.
Lightweight body is never as cold as the dry ice, even when filled.
allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
Read through Instruction Manual (PDF) under Technical Specification before installation.
allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to....

Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....

Check Stock

COMP Cams 4705-16 ID Spring Locator Set of 16-1.300\ OD.570\ ID.060\ Thickness

... to their appropriate installed height. Since they are available in multiple locator thicknesses, these locators eliminate the need to stack shims, while also adding to valvetrain stability and durability..
Protect Your Head - Valve springs should never be installed directly on aluminum heads. Protect your expensive cylinder heads by installing springs on our hardened steel spring locators..
Made to Measure - Made for both factory and aftermarket cylinder head dimensions, these spring seats are available for nearly any engine. With options in multiple O.D.'s (outside diameters), I.D.'s (inside diameters) and thicknesses, COMP has a locator to fit your valvetrain project..
Precision Machined for Consistency - Crafted in-house, using the best machining equipment, COMP Cams seats and locators are precision machined to ensure consistent thickness and inside/outside diameters for a perfect fit everytime..
Quality Guaranteed - COMP Cams' valve spring locators are made from a hardened steel alloy that not only protects expensive cylinder heads but also ensures the durability of valve springs, valve guides and retainers. Held to the tightest tolerances in the industry, our locators are a worthwhile investment for your next spring change..

Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....

Check Stock

Victory 20lb CO2 Tank Aluminum Cylinder with CGA320 Valve

Aluminum carbon dioxide cylinder with cga 320 valve installed.
Cylinder with valve, without siphon tube.

Check Stock

Luxfer Mega-Catch | CO2 Gas Cylinder | 20 lbs

Aluminum carbon dioxide cylinder with CGA 320 valve installed..
8.0 inch diameter, 28.2 inch length, 1.125" UNF inlet thread..

Check Stock

New 60 cu ft Steel Oxygen Cylinder with CGA540 Valve

New, high-quality 60 cu ft steel oxygen cylinder with CGA540 valve.
Thick walled steel tank, with the durability to stand up to any work site.
7″ diameter x 22.5″ in height with valve - approximately.
All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..

Check Stock