Top Cnc Glass Working Center Reviews

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

  • CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
  • COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
  • HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
  • EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
  • ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..
Check Stock

500W CNC Router Machine, MYSWEETY 3020 PLUS CNC Wood Router 3 Axis Desktop CNC Machine for Metal Wood Acrylic MDF with Limit Switches, Emergency-Stop, Working Area 300*200*73 mm(11.81*7.87*2.87 inch)

  • ...h solid dual steel linear guide rails which are 12mm thick and also come with bearing slides. All-metal X-Z axis part, up to 73mm of vertical travel, more powerful stepper motor, all of these are designed to ensure the movement of the 3-axis faster and more stable, resulting in improved engraving accuracy.
  • 【Larger Working Area】: The working area of the 3020-PLUS router vs the 3018-PRO is larger, increased to 300*200*73mm(11.81*7.87*2.87inch). Our working table with a particular appearance has precise scale lines and a flat working surface, convenient for you to locate and measure the engraving material size. And the high quality emergency stop and 6 limit switches for all-around protection making it more safe to use.
  • 【Wide Compatibility & Easy to Assembly】: The CNC carving machine is compatible with GRBL software and supports Windows XP/7/8/10, Linux and Mac OS (a bit more complicated to operate compared to Windows). This unit is pre-assembled, It was easy to assemble out of the box with concise instructions.
  • 【Package Included】: Comes with everything you need. It's: all parts to assemble the 3020 PLUS CNC machine, offline controller, Z-probe, CNC router bits, clamp, and more. This is an extremely well-built, capable machine, works fantastica....
Check Stock

RATTMMOTOR 3018 PRO CNC Wood Router Machine 3 Axis GRBL Control USB Port DIY Mini CNC Router Machine Kit Plastic Acrylic PVC PCB Wood Engraver Milling Carving Machine Working Area 30x18x4.5cm

  • 【Upgrade Version CNC 3018 PRO】※ Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • 【Material/Dimensions】※ The fixed external frame is made of black injection molding material, working table is aluminum alloy material. Screw rods uses stainless steel quality. It can able to engraving in plane by moving X/Y/Zaxis. High precision and durability and good appearance..
  • 【Simple Assembly/Use】※ This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files. Please let us know if you need any help..
  • 【Update GRBL Board】※ The updated control board has added the functions of supporting emergency stop button and X/Y/Z axis limit, and the functions are more complete. Users can design and equip those DIY accessories suitable for this mini engraving machine according to their own needs. Equipped with a silent cooling fan, which can dissipate heat quickly during operation, with low noise and good quality. Also, the control board can automatically....
Check Stock

MYSWEETY 2 in 1 7000mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis Mni DIY CNC Router with 7W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ⚒️【Come with 7W 7000mW module】- can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, acrylic, ceramic/stone, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver..
  • ⚒️【Large Working Area】- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8”), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • ⚒️【The main two advantages of offline controller】- 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood

  • 【Upgrade Version CNC 1610 PRO】Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • 【Simple Assembly】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files. Please let us know if you need any help..
  • 【Applicable Engraving Material】CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect..
  • 【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering....
Check Stock

MYSWEETY 2 in 1 5500mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis DIY CNC Router with 5.5W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ...sted in CNC, helping you engrave the model efficiently..
  • Come with 5.5W 5500mW module - Can be carved wood, bamboo, paper, leather, flammable plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver..
  • Large Working Area- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • New Control Board- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module..
  • Simple Assembly- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

82" Carbon Fiber Bowl Tripod Heavy Duty Camera Tripod with 75mm Bowl and Adapter, 10 Layers Carbon Fiber 1.57" /40mm Leg Tube, Ultra Stable Professional Camera Tripod, Max Load 88Lbs/40kg (AS95C)

  • ...pods, and the main parts are made of metal, So it can support 88 pounds, and is very strong and stable..
  • 【Winner's Height】 Max height 82 "/208 cm. 2 sections of extended center column and 4 sections of column legs with quick release twist lock, can adjust the working height from 5.5" / 14 cm to 82" / 208 cm. Easily over the top of other people's heads, to meet your different shooting needs..
  • 【Quick Adjustment Bowl】This carbon fiber tripod comes with a 75mm leveling bowl that provides a broad base for your tripod head/camera level and balance. What's even more amazing is that it also allows you to quick adjust the camera shooting angle..
  • 【Ultra-low angle Shooting】The range of leg adjustment angle is 7°- 64°, and the lowest angle is 7°, which is lower than most tripod angles and can adapt to low-angle shooting requirements. Each leg is independently adjustable in length and angle and well-suited for use on uneven ground..
Check Stock

Manual Pulse Encoder, Portable High Efficiency CNC Pulse Generator for Numerical Control System

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

BCD Metal Spinning Tops and Spinning Top Base Set - Brass, Bronze, Aluminum, Stainless Steel Spinning Top, Teak Dock, Concave Glass Lens Top Spinning Base - Desk Toys for Adults - Unique Gift

  • DESKTOP LUXURY in one full EDC spinning top game set. Bruce Charles Designs top spinning base includes our fused silica glass spinning top glass lens plus all 4 of our metal spinning tops.
  • FASTER, LONGER, superior spin tops. Our spin top set includes 1 brass metal spinning top, 1 bronze, 1 steel and 1 aluminum brass spinning top. CNC machined. Upper grips are knurled for better torque.
  • PREMIUM QUALITY spinning top base. Made of durable Bermese Teak. Keeps the spinning glass stable, reduces spin top motion to keep your spinning tops spinning for up to 12 minutes!.
  • DOUBLE CONCAVE lens. Polished smooth surface. Double sided - center of lens is 2.8mm thinner than the edges. Frosted reducing glass lens edge for a touch of elegance. Designed for all our EDC spinning tops.
  • THE PERFECT GIFT for men, women, and all EDC spin top enthusiasts. ADD TO CART and take it for a spin.
Check Stock

Manual Pulse Encoder, Portable Smoothly Operation CNC Pulse Generator 4 Terminal for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

CNC Pulse Generator, Manual Pulse Encoder 100PPR 4 Terminal Smoothly Operation for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

DOWAL X20 Golf Putters for Men Right Handed,100% Milling Face, Easy Aligned Steel Mens Putter with Headcover

  • PRECISION MILLED FACE - 100% CNC Milling Face for More Consistent Speed Control and Distance Performance..
  • Larger Center Putt - A unique Diamond CNC Milling Parttern at Center to Increase the Putt Control..
  • Easy Align and Accurate Putt by Duble Alignments on Putter Top!.
  • Waterproof Magnetic Putter Headcover For Free to Protect Your Golf Putter.
  • 360g Weighted SUS303 Putter Head with Stainless Steel Shaft and Soft Grip for You to Play The Best Putt..
Check Stock