Top Closed Swaging Socket Reviews

Loos Cableware MS21259-2RH Stainless Steel Stud with Thread Cover Full Length Of Shank

  • Convenient package of one swage fitting for 1/16" cable.
  • Stainless Steel Stud Fitting for swaging on to Wire Rope and Aircraft Cable.
  • Follow manufacturer's swaging instructions.
Check Stock

Muzata 20Pack 1/8\ Invisible Cable Railing Kit Swageless Lag Screw Cable Genie Tensioner Hidden T316 Stainless Steel for 4\-8\ Wood Posts Deck Stairs CB16, CV1 CG1

  • ...cket wrench Muzata CT16 is essential for invisible installation and keeps cable from spinning when tightening. Package includes 20packs tensioners, 20pcs loop sleeves ,60pcs jackscrews, 20pcs adhesive sleeves, 1pc drill bit,1pc allen wrench.
  • Swageless and Reusable - With the patent swageless design, you don’t need swaging, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner Solution - With a well-designed compact body, you could use two terminals at one corner post of 4”x4” to 10”x10”, and they won't with each other. It also work on both level and angled sections without angled washers. It is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal areas. (Note: For one post corner solution,CB16 can only apply for the actual size of wood post over 4" ).
  • Pre-Designed System - We pre-designed a CableGenie cable railing system to help you construct a hidden wood system, whic....
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

Stainless Steel 304 Eye Type Cable End for 3/32\-1/8\ Cable OD, 0.5\ Eye OD, 0.09\ Thick, (Pack of 25)

  • Convenient package of one swage fitting for 1/8" cable.
  • Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
  • Follow manufacturer's swaging instructions.
Check Stock

PSCCO 8PCS Stainless Steel Welded Closed Screw Ring Eye Bolts Hook Rod Eye Screw Bolts and Bolts Hook with Nuts and Washers

  • Convenient package of one swage fitting for 1/4" cable.
  • Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
  • Follow manufacturer's swaging instructions.
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Lpgg-ZZ 50M / 100M 304 Stainless Steel Wire Rope Softer Fishing Lifting Cable 1.2mm, 1.5mm Diameter +50/100 PCS Sleeve Aluminum (Size : 1.2mm 50m)

  • Convenient package of one swage fitting for 1/16" cable.
  • Stainless Steel Fork Fitting for swaging on to Wire Rope and Aircraft Cable.
  • Follow manufacturer's swaging instructions.
Check Stock

Lichamp Stainless Steel Cable Crimper Hex Lug Tool Hydraulic Hand Crimping Swaging Tool for Dteel Eire Rope 1/8 and 3/16 inch

  • STEEL CABLE SWAGER - Hand held hydraulic crimping tool with multi-size dies is great for crimping the stainless steel sleeve fittings of cable railing....
  • WIDE APPLICATION - Come with 9 pairs of the LUG TYPE crimping dies. Customized for swaging 1/8 inch(4 mm Die) or 3/16 inch (8 mm or 10 mm Die)....
  • POWER WIRE CRIMPER - Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Good choice for battery and welding cables, power wires, electrical....
  • LONG LASTING MATERIAL - All swaging dies were made of durable carbon steel and coated with chrome finish, high strength and good toughness..
  • EASY TO OPERATE - It is equipped with quick switch, C shape head and rubber-coated soft handle. Complete your swaging project smoothly in seconds..
Check Stock

Flexzion Flaring & Swaging Tool Kit 45 Degree Tubing 1/8 to 3/4 inch for Soft Copper Tube Extrusion Type Water Gas Line Automotive Plumbing 14 Pieces Cone with Portable Carring Case

  • Copper tubing flaring + swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • The 45 degree cone for flare. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke. All in a hand carrying plastic case red color box.
Check Stock

YELLOW JACKET 60430 Lightweight Swaging/Flaring Tool 6 Positions

  • Six quick-change positions for flaring soft chopper and aluminum tube.
  • The chrome finish of the swaging pins allows for an easy swaging operation.
  • Strong aluminum bars – each hole flare tested more than 1000 times.
  • Swage pin sizes are molded into the case for easy organization and differentiation.
  • Quick connect feature on lightweight yoke saves time during pin/cone changing.
Check Stock

CALIDAKA 6pcs Swaging Tool Drill Bit Set Professional Precision Swaging Kit Repairing Set with 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” Bits for Copper Pipe Swaging

  • Swaging Tool: A product of the swaging process with this tool making their way into HVAC systems lineset..
  • Function: When air conditioning is installed, expand copper tube, make two copper tube mutual link. (To be installed on hand electric drill.).
  • Material: Made of bearing steel. It has high and uniform hardness and wear resistance, and high elastic limit..
  • Multi Size: 7/8", 3/4", 5/8", 1/2", 3/8", 1/4", 6 different sizes per set of your choice to meet your needs..
  • Easy to Install: Perfect for installers, no matter if you are just learning or have been doing it..
Check Stock

Muzata 10Pairs Invisible Cable Railing Kit 1/8\ Swageless Tensioner and Terminal Flat Head Hidden for 2\x2\ Metal Post Deck Stairs NiceView System CB05,CV2 CL1

  • ...ata CR60 is needed for stair installation. Package includes: 10 pairs of tensioners and terminals,2pcs allen wrench.
  • Swageless and Reusable - With the patent swageless design, you don’t need the hydraulic crimper, greatly saves your time, efforts and also expenses. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this tensioner can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a NiceView cable railing system to help you get a fully customized project, including cable railing kits CB05 CB17, protector sleeves CR72 CR66, angled washer CR60, stainless steel cable WR02, cable cutter CR12, socket wrench CT16,posts PS01 PS02, handrails HT10, handrail connectors (HA01 HA02 HA23 HA24. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
  • Why Choose Us - MUZATA has helped millions of families with their cable rail....
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock