Top Clear Pmma Board Reviews

Driak Acrylic Clear Test Tube 12 Sockets Centrifuge Tube Rack Holder for 10ML Test Tubes

  • designed with 12 sockets, two layers, each socket is 17mm diameter..
  • Made of high quality plastic PMMA material in clear color.
  • Overall Size (Approx):15x 7x 5cm/ 6" x 2.7" x 3" (L*W*H).
Check Stock

smaate 3D Screen Protector Compatible with SKG V7 and V7 PRO 1.7 inches Smartwatch

  • This 3D screen protector is compatible with Smartwatch SKG V7, SKG V7 PRO, ID206 of JIKKO AOKESI HAFURY Yamay, Cubitt CT2PRO UMIDIGI UFit Pro(44mm) and Doogee CS2 Pro 1.69inch smartwatch, and compatible with SKG V7, Fitpolo Gydom FVYAO IDO Veryfit ID207 1.69inch smartwatch, and HAFURY C7 1.54inch Pupuskyer P25 1.69inch smartwatch. You must make sure your watch model number is same before buying.
  • It is not compatible with ID205L 1.3" of HAFURY. And If you find bubbles under the protector appear again, please watch our video here, you can firstly squeeze bubbles out, then put the watch on table with face to the flat surface, then put some heavy book on the watch, after one night, the bubble will not come back.
  • You must watch the instruction video here and read the instruction manual before you install the protector to watch’s screen.
  • This 3D screen protector is not tempered glass, the material is PMMA (Polymethyl Methacrylate) a kind of clear plastic acrylic material, PMMA is Shatter-proof, Fully Protect the screen of smart watch.
  • HIGH SENSITIVITY: you can touch and control the screen fast and easily.
Check Stock

Thermaltake Pacific DIY LCS PR22 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified Pom Pmma Cooling CL-W081-PL00BL-A

  • Sturdy and durable design: featuring 6mm thick of the pipe wall, pacific pr Series can sustain the maximum pressure up to 99 psi (pounds per square inch). easily open out the top cap for cleaning..
  • Driven performance: maximum discharge up to 500L/hr for efficient cooling of your components. Top cap supports rubber washers for a proper seal, including two predrilled G1/4” Ports for fittings..
  • Heat-resistant acrylic Tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) Tube maximum working temperature: 131℉ (55℃)..
  • Easy and flexible application: along with two brackets connected to both ends, pacific pr Series is Solid hold inside the chassis and allows enthusiasts to build up superior water cooling.
  • The pacific pr Series can be installed either horizontally or vertically, making the chassis out of the ordinary!.
Check Stock

Ktone 4 String Clear Body Lucite Electric Bass Guitar Headless with Free Gig Bag New

  • 4-String Lucite Electric Bass Guitar, headless with Gig Bag.
Check Stock

Thermaltake Pacific DIY LCS PR15-D5 200ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified POM PMMA CL-W080-PL00BL-A

  • Sturdy and Durable Design: Featuring 6mm thick of the pipe wall, Pacific PR Series can sustain the maximum pressure up to 99 PSI (Pounds per square inch). Easily open out the top cap for cleaning.
  • Driven Performance: High-lift pumping can reach up to 15 feet high at the max speed. Gamers can build up liquid cooling loop, two GPUs, three radiators, or even more DIY components at the same time.
  • Ultimate Speed Controller: Designed with a manual speed control knob to provide five speeds. Maximum discharge up to 1135 L/hr provides high-performance cooling to your components.
  • Heat-resistant Acrylic Tank: Featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131℉ (55℃).
Check Stock

1 Pc - 1 1/2” OD x 1' ID x 8' INCH LONG CLEAR ACRYLIC PLEXIGLASS LUCITE TUBE HEAVY 1/4' WALL

Check Stock

MECCANIXITY Acrylic Pipe Rigid Round Tube Clear 12mm ID 16mm OD 305mm for Lamps and Lanterns,Water Cooling System

  • With high transparency, transparent acrylic tube has strong light transmittance when used in lamps and lanterns. When it is used for liquid transportation, the flow of liquid in the tube can also be clearly seen. Transparent PMMA tube is widely used for lamps and lanterns, water cooling system, building materials, handicrafts, DIY, and so on..
  • The acrylic plastic tubing, is in size of : 12mm/0.47-inch inner dia, 16mm/0.63-inch outer dia, 305mm/12-inch total length.
  • Round PMMA tube made in PMMA material, durable and long service life.
  • High transparency, high light transmission.
  • Rigid Round Tubing has very high impact resistance.
  • Steps of installation:1.Prepare PMMA pipe of an appropriate size.
  • Please Note : Please select the appropriate size of acrylic pipe, especially the size of inner diameter and outer diameter.
Check Stock

MECCANIXITY Acrylic Pipe Rigid Round Tube Clear 86mm ID 90mm OD 200mm for Lamps and Lanterns,Water Cooling System

  • With high transparency, transparent acrylic tube has strong light transmittance when used in lamps and lanterns. When it is used for liquid transportation, the flow of liquid in the tube can also be clearly seen. Transparent PMMA tube is widely used for lamps and lanterns, water cooling system, building materials, handicrafts, DIY, and so on..
  • The acrylic plastic tubing, is in size of : 86mm/3.39-inch inner dia, 90mm/3.54-inch outer dia, 200mm/8-inch total length.
  • Round PMMA tube made in PMMA material, durable and long service life.
  • High transparency, high light transmission.
  • Rigid Round Tubing has very high impact resistance.
  • Steps of installation:1.Prepare PMMA pipe of an appropriate size.
  • Please Note : Please select the appropriate size of acrylic pipe, especially the size of inner diameter and outer diameter.
Check Stock

Corsair Hydro X Series XT Hardline 12mm Multicard Kit

  • The CORSAIR Hydro X Series XT Hardline Multicard Kit is pre-cut for SLI and CrossFire X, letting you easily add multiple cards to your custom cooling system in two, three or four slot graphics card spacing..
  • Crystal-clear chamfered tubing easily and neatly links your GPU water blocks together with just one set of Hydro X Series XT Hardline Fittings..
  • Resilient PMMA construction won’t warp or deform under high pressure or temperatures..
  • Neatly link your GPU water blocks together with crystal-clear, ultra-resilient chamfered tubing using just one set of Hydro X Series XT Hardline Fittings..
  • Max Operating Temperature: 60°C coolant temperature.
Check Stock

1 Length 1/2\ OD x 3/8\ ID x 36\ INCH LONG THIN WALL CLEAR ACRYLIC PLEXIGLASS TUBE - .50\ Diameter - 12.7mm

Check Stock

1 Length 1/2\ OD x 3/8\ ID x 18\ INCH LONG THIN WALL CLEAR ACRYLIC PLEXIGLASS TUBE - .50\ Diameter - 12.7mm

Check Stock

2 Lengths - 1/2\ OD x 3/8\ ID x 12 Inch Long Thin Wall Clear Acrylic Plexiglass Tubes - .50\ Diameter - 12.7mm

Check Stock

2 Lengths 3/8\ OD x 1/4\ ID x 24 Inch Long Thin Wall Clear Acrylic Plexiglass Tubes .375\ Outside Diameter

Check Stock