Top Clean Cuts Reviews

Fiskars Amplify RazorEdge Fabric Shears, 10 Inch, Orange

  • Longer blades are ideal for cuts through multiple fabric layers, or thick and heavy fabrics.
  • larger handles provide extra room and comfortable fit.
  • Amplify technology senses blade separation, forcing blades back together for crisp, clean cuts.
  • RazorEdge Shears feature ultra-sharp, premium-grade, stainless steel blades that glide through fabric for clean cuts all the way to the tip.
  • Exceptional comfort and control provided by Softgrip touchpoints and ergonomic thumb and finger loops that fit hand shape and natural movement.
Check Stock

EZSMART Track Saw System 64

  • Works with 99.9% of right or left hand blade saws, For saws with blades 6 ½ , 7 ¼ or 8 ¼ inch and footplate 12.69 x 7.1 inch or less..
  • Provides safe, straight precise cuts on or off the guide rail..
  • Replaceable zero clearance anti-chip edge, Cuts at 90 degrees or beveled..
  • Clean splinter free cuts, Patented dual sided track, cuts in both directions..
  • Lightweight yet rugged for jobsite portability..
Check Stock

EZSMART Track Saw System 36

  • Works with most right or left hand blade saws, For saws with blades 6 ½ , 7 ¼ or 8 ¼ inch.
  • Provides safe, straight precise cuts on or off the guide rail..
  • Replaceable zero clearance anti-chip edge, clean splinter free cuts..
  • Patented dual sided track, cuts in both directions, cuts at 90 degrees or beveled..
  • Lightweight yet rugged for jobsite portability..
Check Stock

Fiskars Power Lever 8-Inch Hedge Shears

  • Ideal for trimming and shaping hedges and decorative shrubs.
  • Power-Lever technology multiplies leverage to give you up to two times more cutting power than traditional single-pivot hedge shears.
  • Gator-Blade serrated blades grip branches and stems for clean cuts.
  • Patented self-sharpening design keeps the blades performing at their best.
  • Fully hardened, precision-ground steel blades make clean cuts.
  • Low-friction coating helps the blades glide through wood, prevents the blades from gumming up with sap and debris and helps the blades resist rust.
  • Shock-absorbing bumpers help reduce the jarring conclusion at the end of cuts.
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 60T (14074)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 60 tooth count blades give balanced performance, delivering smooth cuts to plywood or melamine, with enough strength to cut framing lumber quickly..
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 80T (14083)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 80 tooth count blades are ideal for making exceptionally smooth cuts in MDF or other thin laminates without blowout..
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 100T (14084)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 100 tooth count blades make ultra-smooth cuts in laminates, plywood, cement board and plasterboard..
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

Hetai Heavy Duty Wire Cutters Steel Cable Cutter Wire Rope Cutter Aircraft Bicycle Cable Cutter,Up To 5/32"

  • The steel cable cutter is an essential tool when installing a cable railing system. The hardened heat treated blades cut 5/32" cable cleanly and quickly for an easy installation.
  • Clean, square, cold, perfect cut every time. When cutting cable, it was just as good. No frays.After 200 cuts off 1/8" 7*7 stainless steel wire rope, stainless steel cutter still very sharp and clean cut.
  • Our wire cutter required little handforce because of very high transmission ratio with opening spring,only one hand can finish all cutting. Beside,it is much easier to carry around..
  • Sharp, compact design, durable cutting edge make a very clean and precise cut,no frays..
  • It's a competent tool that makes clean cuts up to its rated wire gauge. You can use this in a variety applications from multi-strand gardening wire to preparing bicycle cable and brake cables and motorcycle cable where clean cuts are critical. An occasional drop or two of oil and a wipe-down is about all it needs for maintenance..
Check Stock

Makita T-01426 2 Pc. 6-1/2\ Carbide-Tipped Circular Saw Blade Set

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Carbide tooth construction for clean cuts and long life.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Specially designed for cordless saws to permit more cuts per charge.
  • For use with 6-1/2" Cordless Circular Saws with 5/8" arbor.
Check Stock

Milwaukee M12 FUEL Oscillating Multi-Tool Kit

  • Bi-metal blade with xtra-clean clean cutting edge for clean cuts in hard wood.
  • Curved Tec blade design for greater control and smooth, precise plunge cuts.
  • Color coded interface and laser etched multi purpose tool blades to quickly identify the right blade.
  • Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others.
Check Stock

Makita T-01410 6-1/2\ 40T Carbide-Tipped Circular Saw Blade, Fine Crosscutting

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Carbide tooth construction for clean cuts and long life.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Specially designed for cordless saws to permit more cuts per charge.
  • For use with 6-1/2" Cordless Circular Saws with 5/8" arbor.
Check Stock

NGHIA Acrylic Nippers Stainless Steel - Nail Nippers - Collection M-01 to M-05 (#M-03)

  • Quantity: 3 Pieces | Color: Stainless Steel.
  • [MEASUREMENT] Length: 3.2 Inches | Width: 0.5 Inches.
  • [MATERIAL] Made with durable, quality stainless steel that is long lasting and rust-proof. Sturdy material and blade that prevents splitting and damaging of nails, while providing years of sharp-edge nail cuts..
  • [DESIGN] Heavy duty lever allows for easy to clip pressure and maximum control for users. Long handles allow comfort and avoids uneven cuts by reducing slip while using. Durable and sharp blades allow for smooth, and clean cuts. Straight-edged blade allows for a proper edge and accurate corner trims on various nail shapes. They are easy to hold, control, clean, and store..
  • [USES] These strong nail clippers are suitable for professional salon or casual at-home manicure and pedicure uses. Clippers are suited for young adults, seniors, athletes, or any persons dealing with thick nail growth and other common nail problems. Clippers provide effortless cuts that will ultimately not damage or bend the user’s natural nails..
Check Stock