Top Clamp on Gas Flow Meters Reviews

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ... includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

Peterson Real Fyre 24-inch Split Oak Designer Plus Log Set with ANSI Certified Vented G45 Dual- Flame Burner w/Variable Flame On/Off Valve w/Handheld Remote Control (Propane Gas)

  • Peterson Real Fyre refractory ceramic gas logs are meticulously hand painted to re-create the look of natural wood |Reinforced with steel rods for greater integrity | Proudly made in the USA.
  • Dual Flame ANSI Certified G45 65,000 BTU VENTED burner produces more depth with rich full flames in front of the gas logs for more realism | ONLY for use in VENTED fireplaces.
  • Glowing ember bed for realistic look of burning wood | Silica Sand covers the burner resulting in wider flame dispersement and quieter burn by muffling the sound of gas flow.
  • Includes 6 Hand Crafted Logs, ANSI Certified G45 65,000 BTU Dual Flame VENTED Propane Burner, Variable Flame On/Off Valve w/Handheld Remote Control, Custom Grate, Glowing Embers, Vermiculite, Damper Clamp and Flexible Gas-Line Connection Kit.
  • Includes Pre-Installed Variable Flame, On/Off Valve w/Handheld Remote Control (ONLY for use in a VENTED Fireplace with PROPANE GAS).
Check Stock

Amiarc Portable Electric Drill Pump, Self Priming Water Transfer Pump Hand Drill Driven Pump Small Household Pump with Two Connectors Centrifugal Pump for Transfer Oil, Fluid Diesel, Kerosene

  • Large flow - Stable performance and high efficiency. The recommended speed of our drill pump is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..
  • Wide Application - Works great with most electric hand drills , Just connect water pipe with hose clamp and insert the electric drill to use the water transfer pump. Electric drill pump is suitable for transporting light liquids such as water, oil, diesel, liquid fertilizers, etc., and can also be used for car cleaning, gardens, lawn watering, pumping and drainage, etc..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ... connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder, 1×earth clamp, 1×conversion wire adapter, 1×2 meters gas hose, 1×2 meters air hose, 1×air regulator, 2×electrodes, 2×tips, 2×hose clamp, 1×npt1/4 air plug, 1×brass standard air plug..
Check Stock

OKOOLCAMP Gasoline Siphon Hose - Transfer Siphon Pump for Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank Manual Hand Fuel Pump with 2 Durable Hose

  • UPGRADED GAS SIPHON PUMP: 15mm diameter, 3.5gallon/min transferring speed. Premium rubber bulb prevent from easy corrosion. 4 x fuel hose secure clamp....
  • Instantly Siphon Flow: Use the hand fuel pump, it would start siphon flow soon. Rubber manual pump is corrosion resistant and it would prevent from....
  • Durable PVC Transfer Pipe: 1.2m/3.9Feet Output pipe and 0.8m/2.6 Feet input pipe, 2mm hose thickness with four hose clips to secure it in place, no....
  • NOTE: Never start the siphon process with your mouth, it's dangerous. This siphon pump for gasoline not for salt water or corroding chemicals.
  • Easy carry and stored, a very helpful emergency or life assistant for gas gasoline petrol diesel oil fish tank water transfer. NOT for hazard chemical....
Check Stock

Portable Fuel Tank 116gl Diesel

  • ...d at the fastest speed.Wide diameter neck provides a larger opening for fill, without spilling or waste of fuel. And ergonomic hand crank, labor-saving and improve efficiency..
  • SAFE: Friction will cause static electricity in the process. The design of anti-static grounding clamp,it can prevent accidental static discharges and eliminate static electricity , so its safe to use. The fuel caddy is deal for storage of gasoline and diesel..
  • MOVABLE & EASY TO USE: Wheel and Hand pusher design for easier mobility and transportation. The design of easy to read vent/fuel level gauge makes it convenient for you to observe the remaining oil in the. Reversible rotary hand pump can suck the fuel remains in the kink free hose back to the fuel tank ,convenient and waste free..
  • LARGE CAPACITY: 30 gallon large capacity fuel storage space design. The fuel transfer tank is ideal for gas powered lawn and garden tools, automobiles, ATVs and a wide range of fuel powered pieces of equipment..
  • STURDY & DURABLE: The gas tank is made of high quality material. Heavy-duty iron tank is sturdy and durabl....
Check Stock

Electop 10 Feet High Flow Siphon Hand Pump Manual Car Fuel Transfer Pump with Syphon Hose Tube Pipe/Control Valve/Hose Clamps for Lawn Mowers Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank

  • HIGH FLOW HAND SIPHON PUMP- Package includes 1*10ft/3 meters flexible and durable PVC transparent hose,1*high flow hand siphon pump,1*control valve,4....
  • EASY TO USE- The fuel transfer siphon pump built-in inlet and outlet valve to prevent liquid backflow during pumping. And we configured a complete 3m....
  • WIDE APPLICATION- Lightweight and portable siphon hand fuel pump, for gasoline, oil, air, water and other common liquids, ideal for emergency gas....
  • CONTROLLABLE VALVE- The controllable valve is configured to prevent backflow and direct extraction, adjust flow, on/off controllable and convenience.....
  • WARM TIPS- The liquid you want to siphon must be HIGHER than the container that flows into. The end of the input hose must be kept inside the liquid,....
Check Stock

JMCUHYD Manual Siphon Pump For Gas Oil Water Fuel Hand Transfer Pump With Siphon Hose & Clamp Portable Fuel Transfer Pump

  • ...e into the fuel tank,a few squeezes of the bulb will get the flow of fluid started, put the lower tube into the container,and the fluid will flow automatically.
  • 【SIPHON PUMP AND HOSE SET】Rubber bulb x1, Reinforcement Ring x 2, 3.9 ft hose x 1, 2.6 ft hose x 1, Shut-off clamp x 1 ".
  • 【RUBBER BALL】 The siphon bulb is made of high quality rubber, and has a built-in one-way valve to prevent backflow. Durable for long time use..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

  • Professional Ggs Flow Tester / Meter Peashooter Style.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

Plastic Hose Clips, Heavy Duty Speedy Double Snap Grip, Nylon Adjustable Fuel Line Air Water Hose Tube Clamp, White, Pack of 10, 9.1-10.2mm

  • WIDE APPLICATIONS ---- The clamp is mainly used to clamp the hoses to regulate the flow or cut off the hoses..
  • HIGH QUALITY ---- The materials used in all our products are of high quality POM plastic, good elasticity, clamping force. These plastic clamp Will definitely meet your needs in the process of use..
  • VARIOUS SIZE ---- In this package, We prepared 4 Sizes Plastic tube clamp clips, Including Diameter 0.4Inch, 0.49Inch, 1.18Inch, 1.37Inch. These siphon hose shut off clamp can Adjusts rate of flow with great precision, Easy to use and very convenient..
  • POWER FUNCTIONS ---- The small two sizes Tube Clamp with single position on/off gives positive shut-off with fingertip control.
  • Use for thin-walled tubing under 3mm (³⁄₁₆") O.D. In addition two Sizes Tube Clamp have a 15-position stepped adjustment that controls flow from full open to complete closure.
  • fits tubing from 8 to 15mm (⅛ to ⁷⁄₁₆") O.D..
  • THE BEST SERVICE ---- If you have any questions during the use of the product, please feel free to contact us, we will help you solve all your problems as soon as possible. To provide you with the most satisfactory shopping experience..
Check Stock

CarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)

  • 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Operation Pressure: 5-8bar (72.5-116 psi).
  • Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
  • Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
  • Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
  • This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
  • this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
  • Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
  • Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
  • NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

  • ...ified by filter. Discharge clean air for diving breathing..
  • Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
  • 10-15 meters for both if connects to two hoses..
  • Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , bearing etc..
  • Application: Widely used in Kayak Dive, Hookah Dive, Long Hose Gauge Scuba Diving, Commercial Boat Cleaning, Pool Cleaning, Dive Inspection, Lobstering Diving Propeller inspection etc..
Check Stock