Top Clamp on Exhaust Tip Reviews

Q1-TECH, Universal 4' Burnt Tip JDM N1 Style Muffler Hi Flow Stainless Steel Weld-On 2.5' Inlet , Muffler , Removable Silencer Pre-attached , Deep and Smooth tone

  • ✅Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit . and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp..
  • ✅Feature: Polished stainless steel, The muffler is 2.5 inch inlet, 4 inch outlet, 19 inch length just need to measure the inlet of your car before purchase..
  • ✅Straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability..
  • ✅Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound..
  • ✅Package includes: 1 x Exhaust Muffler, Includes removable silencer OUTLET TIP 4", INLET TIP 2.5".
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 18.00 Long Slant Chrome Wesdon Exhaust Tip

  • Exhaust Tip 2.50" Inlet 6.00" Outlet 18.00" Long.
  • Weld Or Clamp On Style 2.50" Inlet ( Clamp not included ).
  • Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
  • Polished Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).
Check Stock

LCGP 2.5 Inch Inlet Turn Down Bolt On Exhaust Tip Standard 2 1/2 Inch Inside Diameter Turndown Exhaust Tailpipe Tip Black Powder Coated Stainless Steel 9 Inch Length

  • 【SIZE】 2.5 inch inlet, 9 inch overall length, turn down exhaust tip.
  • 【MATERIAL】 LCGP tip is made of stainless steel and black powder coated to provide a sleek look to your car exhaust.
  • 【INSTALLATION】 Welded on pinch clamp and bolt for easy installation.
  • 【DESIGN】 Angle cut and trun down. An affordable way to personalize your exhaust system..
  • 【BRAND GUARANTEE】 LCGP provide 1-year warranty. We value your shopping experience and strive to offer a high-quality product and service. And if....
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

UANOFCN 1998 and Up Exhaust Y-Pipe Kit Replaces 807166A1 Hose Bellows 32-14358T 32-44348T for Mercruiser

  • We ship from the USA, it is fast and guaranteed..
  • Replaces 807166A1 Water Shutters / Flappers 32-14358 , 32-14358T , 32-14358001 , 18-2746 Lower Exhaust Bellows , Tube , Hose，Clamp.
  • Also Replaces 32-44348 , 32-44348T , 32-44348001 , 18-2748 Upper Exhaust Bellows , Tube , Hose，Clamp.
  • Note: These will not work on V6 engines that came with the one piece manifolds ( use 807166A2 it has a flat tip ) , or early V8 with the round pin....
  • 100% Brand New With High Quality.Cooperated with local workshop, quality is guaranteed..
Check Stock

CORSA 14328BLK Cat-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14317 Axle-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14459BLK Cat-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14114 Cat-Back Exhaust System with X-Pipe

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14952 Cat-Back Exhaust System with X-Pipe

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

Hammered Aluminum Skull Exhaust Tip - 4', 3', 2.5' or 2' (2 Inch)

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

Exhaust Tip 2.50 Inlet 6.00 Outlet 12.00 Long Slant Chrome Wesdon Exhaust Tip

  • Exhaust Tip 2.50" Inlet 6.00" Outlet 12.00" Long.
  • Fits a 2.50 Exhaust Pipe 2.50 inlet 6.00 Inch Outlet.
  • Polished .001 Bright Nickel Chrome Plated (Please measure to make sure it fits your Truck).
Check Stock