Top Clamp Mounted Reviews

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.

Check Stock

ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes

Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand..
Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish..
Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze..
Durable Materials: The bike stand for maintenance is made of iron, durable for long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds).
Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value..

Check Stock

The Mic Clip - Best Police Radio Mic Clip by Mic+Tight

. It is simple and convenient, and microphone adjustment of these be carried out without disturbing the microphone stand.
. It is simple solution for micing these drums without the hassle of floor mounted mic stands.
. The clamp has some design and 3 groove points that allow it to suit a wide variety of tom and snare drumsand desired mic positions.
. This drum clamp can be mounted to the rim of most snare and tom drums.

Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
【Holding Capacity】27Kg / 60Lbs, solid grip.
【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

Check Stock

iPad X-Clamp with Suction Cup car Plane Mount for iPad Pro 9.7inch or iPad Mini or Tablet of Similar Size Samsung Galaxy

Adjustable ball head mount for omnidirectional mounting angle for easy viewing..
Can be mounted to multiple locations with smooth surface, such as windshield of cars, general aviation airplanes..
Heavy duty suction cup mount that will never fall off if properly mounted..
X-clamp can be adjusted to mount any sizes of tablet between the size of iPad mini to a full size iPad..
The clamp is made of highest quality hardened metal. With included ball head, it can also be mounted onto a tripod..

Check Stock

SMALLRIG Articulating Magic Arm with Double Ballheads (1/4' Screw) Monitor Mount for Field Monitor, Lights, Audio Recorders - 2070

【FOR FIELD MONITOR 】With 1/4’’ screws on both ends, this product is compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum and stainless steel arm has a payload capacity of up to 3.3 lb.
【360 DEGREE ADJUSTABLE】This SMALLRIG monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared allen wrench is ready to lock it tighter..
Arm component is interchangeable, it allows you to connect the other options like NATO Clamp(SmallRig 1973), Hot Shoe(SmallRig 1562), Super Clamp(SmallRig 735), and 3/8-16 screw adapter(SmallRig 1069)..
The thumb wingnuts with anti-off structure technology prevents the ballheads fall apart when using, and the rubber cushions to prevent the monitor from scratches..
The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly with single hand..

Check Stock

NIXFACE 2 Heavy Duty Hitch Coupling Clamp - Anti Rattle Device Tightener Receiver

Trailer hitch clamp Materials:Heavy duty steel..
Package Include:1 set of 2" Heavy Duty Hitch Coupling Clamp(Screws included)..
Vehicle Fitment:Hitch Tightener fit for 2" receivers.Designed for use with almost all hitch mounted bike racks and cargo carriers..
Hitch Clamp was designed to eliminates the hitch wobble at the junction of your bike rack / utility carrier / trailer hitch and your hitch receiver..
Easy to Install:Simple design,simple to use..

Check Stock

Neewer Upgraded Super Clamp with Mini Ball Head Mount with 1/4' Screw and Cold Shoe Mount Adapter for LCD Field Monitor, Flash, Microphone, LED Light, Light Stand, Load up to 3.3lb/1.5kg — ST11

【Metal Super Clamp】: Made of high-strength aluminum alloy and stainless steel, it is solid with great durability. The maximum opening is 52mm and the minimum is 15mm, it can be mounted to anything like cameras, lights, umbrella, hook, bicycle, shelves, table, crossbars and more.
【1/4" Screw】: Standard 1/4" Screw on the top of the ball head is compatible with LED light, camera, Microphone, Monitor, and other accessories, and support 360-degree rotation to meet various shooting demands.
【Cold Shoe Mount】: The included cold shoe mount is suitable for attaching to cameras, such as Canon, Nikon, Sony, Olympus, Pentax, Panasonic, Fujifilm Cameras, and more.
【Wide Compatibility】: The super clamp with 1/4"-20 and 3/8"-16 thread can be mounted virtually anywhere. Included anti-slip rubber cushion of the clamp helps prevent the scratches of your devices and help to lock the device tighter.
【Lightweight & Portable】: Weights only 0.29lb/130g, The optimum load of this super clamp mount is 1.5kg (3.3lb), perfect for both indoor and outdoor events..

Check Stock

Complete Jewelry Soldering Pickling Kit with Pickle Pot Compound and Copper Tongs

【Novel Design】: Bench pin clamp set is ideal for bench work, craft ideas, jewelry, and tools workshop. It is perfect for Drilling, Sawing, Filing and Finishing a variety of materials..
【Durable 】: This Bench Pin is made of quality hardwood and comes with a steel clamp. The clamp has a capacity of 1.57"(40mm approx). Dimensions: 2-3/11" x 7-1/2" x 1/2"(58mm x 190mm x 13mm approx)..
【Versatile】: Perfect for holding metal, wood or plastic for easy sawing..
【Convenient】: V-Slot Bench Pin with Clamp, a portable bench pin that can quickly and easily be mounted on almost any Workbench, Desk or Table..
【Perfect for Detail】: It is indispensable for for both the professional and hobbyist..

Check Stock

Fishing Boat Rod Holder, 1/2/4 Pack Pole Stand Rack, 360° Adjustable Holder Racks Bracket for Kayak Canoe Raft Fishing, Reinforced Nylon

...r gives you versatility and convenience while fishing..
【Easy to Install】- The rod holder has a clamp base to attach on objects. Open end grip design accommodates to all types of rods . There is no drilling needed for installation, and you can choose to have it surface mounted or rail mounted..
【360° Adjustable】- By adjusting two different screw joints, fishing rods can be adjusted to any orientation you want. It was designed as a multi-function rod holder for a wide range usage from spinning, casting to spin cast and so on fishing for large medium and small fish species..
【Eco-friendly Material】- This fishing boat rod holder is totally made of high quality and eco-friendly material--strong & anti-corrosion, constructed with high impact resistant heavy duty ABS..
【High Impact Resistant Construction】- The construction is very easy to hold on the boat or kayaks which is very steady. Great fishing rod holders for boats or kayaks, it includes metal hardware..

Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..

Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....

Check Stock

MIKMAYTOO Push Pull Action Toggle Clamps 6 PACK 301AM Latch Anti-slip Hand Tool 110Lbs Holding Capacity Quick Release Woodworking Clamp … (301AM)

【Packing type】6 PCS hand tool Toggle Clamp GH-301AM non-slip red Vertical clamp quick release tool. 100% manufacturer money back.
【Holding Capacity】90Kg / 198Lbs, solid grip.
【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
【Size】190 Degree Handle Opening Angle Plunger Stroke: 16mm/0.6"..
【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

Check Stock