Top Circular Saw Guide Jig Reviews

Bora 543042K 36 WTX Clamp Edge & Saw Guide Kit

  • Rigid aluminum straight edge guide with 36-inch capacity for making straight and accurate cuts.
  • The saw guide works with most circular saws to help keep your saw straight to make accurate cuts.
  • Fits right and left handed circular saws.
  • Saw guide fits right handed and left handed circular saws.
Check Stock

DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

  • EFFORTLESSLY CUT THIN RIPS: The DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood / Ripping Chair Slates, Cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability.
  • This jig maximizes worker safety, streamlines your workflow, and produces successful outcomes.
  • EVEN CUTS: Measurement markings on jig are easy to read so you can make accurate cuts.
  • Ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure.
  • SAFETY FIRST: Protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade.
  • Reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade.
  • Allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding.
  • SECURE GRIP: Easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position.
  • Dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job.
  • Roller on the end acts as a stop for the material and allows the w....
Check Stock

BORA 4-piece NGX Compact Set

  • Includes 24" NGX clamp edge, 25" NGX clamp edge extension with connectors, rip handle, saw plate.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
  • Can be used on right- or left-handed circular saws — no tools necessary to switch.
Check Stock

Milescraft 14000713 Saw Guide for Circular and Jig Saws

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

Chain Saw Sharpening Jig, Chain Saw Sharpener Tool with 5Pcs Tungsten Carbide Chainsaw Sharpener Bits, Portable Manual Chainsaw Chain Sharpening Jig Kit for 4"-22" Chain Saws, Keep Chain Saw Sharp

  • ...n and save time and effort on your job..
  • "Easy to Use Chainsaw Sharpening Jig: This manual chainsaw sharpener jig kit is as easy to use as a pencil sharpener. ①Install the chainsaw sharpener bit on the hand crank then thread it into the 30 ° front angle catheter. ②Fix the chainsaw sharpener jig on the chain saw guide plate. ③Turn the hand crank to get sharp teeth. ④After sharpening a tooth, just pull the chain to sharpening the next tooth, and repeat this action until the whole chain is clear again.".
Check Stock

Chainsaw Sharpening Jig Chain Saw Sharpener Tool with 5 Pcs Tungsten Carbide Chainsaw Sharpener Bits Hand-Cranked Chainsaw Chain Sharpening Jig Kit for 4 -22 Chain Saws Keep Chain Saw Sharp

  • ...pening tools will increase productivity..
  • Easy to Use Chainsaw Sharpening Jig: This manual chainsaw sharpener jig kit is as easy to use as a pencil sharpener. ①Install the chainsaw sharpener bit on the hand crank then thread it into the 30 ° front angle catheter. ②Fix the chainsaw sharpener jig on the chain saw guide plate. ③Turn the hand crank to get sharp teeth. ④After sharpening a tooth, just pull the chain to sharpening the next tooth, and repeat this action until the whole chain is clear again..
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...gh the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
Check Stock

Missvig Cosplay Wig Demon Slayer Short Gray White Halloween Wig Synthetic Hair Anime Custom Party Hair

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

Makita XVJ02Z 18V LXT Lithium-Ion Brushless Cordless Jig Saw, XSR01Z 18V X2 LXT Lithium-Ion (36V) Brushless Cordless Rear Handle 7-1/4' Circular Saw, & BL1840B 18V LXT Lithium-Ion 4.0Ah Battery

  • Brushless jig saw features an ergonomically designed barrel grip which allows for closer-to-work control and more precise cuts.
  • Jig saw features a Makita-built brushless motor and 3 orbital settings plus straight cutting delivering faster and more accurate cuts in a variety of materials.
  • Brushless circular saw cuts 3X material in a single pass.
  • Brushless circular saw's X2 LXT technolgy delivers up to 558 cross-cuts per charge in 2x4 SPF lumber and up to 291 cross-cuts per charge in 2x10 SPF lumber using two 5.0Ah batteries.
  • BL1840B 4.0Ah battery features an integrated L.E.D. battery charge level indicator which allows users to monitor battery charge.
  • BL1840B battery provides up to 35% more run time per charge compared to BL1830 and reaches full charge in 40 minutes or less.
Check Stock

13.4inch Track Saw Square Guide Woodworking 90° Right Angle Circular Saw Guide Rail Angle Stop Accessories Compatible with Festool/Makita Guide Rail

  • 【Excellent features】 Designed with standard right angles, this circular saw guide ensures a high level of precision in woodworking. The circular saw guide system allows for quick and accurate setting of slicing or milling angles, allowing precise and repeatable 90-degree cuts with the guide without the need to readjust the angle for everyday use or work on your engraving needs..
  • 【UNIQUE DESIGN】The hollow design of the electric circular saw track makes it very light and easy to use, whether for daily use or to carry is very convenient.
  • 【Easy to use】Easy to install and disassemble, just a few steps to complete the installation without too many complicated steps. Use your electric circular saw for a perfect carving experience, a great tool essential for beginners..
  • 【High quality material】90-degree right angle guide made of aluminum alloy and stainless-steel material, with the characteristics of not easy to damage or bend, strong and durable, light weight.
  • 【PRACTICAL TOOL】Cutting machine fixing bracket for precise cutting of wood. Can be used as a clamping device fo....
Check Stock