Top Circuit Board Enclosure Reviews

PowerBass STA-10-10" Underseat Powered Enclosure

  • Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure.
  • Extruded Aluminum Enclosure with Dynamic Damping.
  • 1-Channel 200 Watt High Efficiency Class D Design.
  • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
Check Stock

Powerbass PS-ADF110T Single 10" 175W Amplified Downfiring Enclosure

  • Single 10" 175 Watt RMS Amplified Downfiring Enclosure.
  • Computer Optimized 10" Thin Subwoofer Enclosure.
  • 1-Channel 175 Watt High Efficiency Class A/B Design.
  • Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output.
Check Stock

Gikfun Keycap Puller Antistatic Clip Pliers Switches Circuit Board PCB IC Chip Puller Removal Tool EK1830

  • This clip combination can help you easily remove keycaps, IC chips, switches, etc..
  • Antistatic Clip Pliers Circuit Board PLCC PCB IC Chip Extractor Removal Tool for Arduino.
  • This U type IC extractor is used for pulling integrated block, which is a convenient and professional tool for students to have experiments..
  • The keycap puller holds up to 3 keys to speed uo key removal, compatible with most mechanical keyboards including Cherry MX,Alps,and topre switches.
  • Stainless steel main body covered with PVC insulated enclosure..
Check Stock

NooElec Extruded Aluminum Enclosure Kit, Black, for Ham It Up Plus Barebones RF Upconverter for NESDR and RTL-SDR radios

  • Comes with all hardware required for finished assembly, including color-matched screws and rubber feet for non-slip usage.
  • Enclosure is laser-engraved with logo and labels, to ensure permanency.
  • NOTE: Ham It Up Plus Barebones circuit board is sold separately and is NOT included!.
  • Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

Rockville Wheel of BASS 8' Slim Under-Seat Powered Truck/Car Audio Subwoofer Sub

  • Rockville WHEEL OF BASS 8" 500w Slim Under-Seat or Trunk Mounted Powered Car Subwoofer..
  • Enclosure is very shallow at only 3.15” tall so it can fit anywhere. You can fit it under seat but it also sounds great and takes up little space in your trunk..
  • Enclosure is made out of solid cast aluminum. Peak Power Handling: 500 Watts. RMS Power Handling: 125 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply..
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
  • Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz.
Check Stock

Aluminum Enclosure Case, DIY Project Boxes for Electronic, DIY Aluminum Electronic Enclosure Box, 50 x 178 x 300mm, Good Heat Dissipation

  • ALUMINUM ALLOY PROJECTOR BOX - Made of high quality aluminum alloy material, durable and long service life..
  • DIY ENCLOSURE CASE - Adopt split type design, you can assemble and design the box you want by yourself..
  • PREMIUM QUALITY - Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • HIGH PERFORMANCE - Good heat dissipation and excellent electromagnetic shielding performance..
  • WIDE RANGE OF APPLICATION - Used for heat-dissipating aluminum casing of electronic products, printed circuit board wiring aluminum box, DIY, etc..
Check Stock

LEFELWEL Upgrade M365 Pro Dashboard Cover Replacement Circuit Board for Original Xiaomi M365 /M365 Pro Electric Scooter Parts Accessories

  • 【Compatible with Two Models】 The newest model of Circuit Board has a screen cover design that is fit for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. The Circuit Board is a replacement of Xiaomi M365/M365 Pro Electric Scooter..
  • 【Upgrad Model of Circuit Board】 This is the newest model of Circuit Board with a screen cover, designed for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. No need to do any firmware upgrade after you replace the Circuit Board..
  • 【High Quality and Durable】 The M365 Pro dashboard is made of high quality metals and PCA materials，fully compatible with xiaomi m365 and pro scooter accessories.
  • 【Functional Appearance】 The newest model of Xiaomi M365 / M365 Pro circuit board has a cool, clear display dashboard that shows all the functionality and speeds. This product is perfect to work with the electric scooters. Economically practical with more safety and convenience..
  • 【Packing list】 1 Circuit board for M365/Pro Scooter, 1 replacement cover ,1 tool and screw,.
Check Stock

Rockford Fosgate P300-8P Punch 8 300 Watt Powered Ported Subwoofer System

  • The Punch 300-8P is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or....
  • The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 11.4" x 17.6"....
  • Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch.
  • The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Buachois 2 Pcs 68x36mm 0.3W 5V Solar Power Solar Energy Panels Electric Motor STEM Kits Electronic Assembly Solar Powered Toy Kit for Boys and Girls

  • POLYSILICON PRODUCTS:The circuit board is made of high-quality polysilicon, with high photoelectric conversion rate, energy saving, good insulation....
  • MAIN FUNCTION:The circuit board is a device that directly or indirectly converts solar radiation energy into electrical energy through photoelectric....
  • SCOPE OF APPLICATION:The circuit board is usually used in solar garden lighting, small home lighting systems, solar street lights, outdoor solar....
  • ANTI-WIND AND ANTI-FREEZE:The circuit board adopts the design of anti-wind and anti-freeze, so that it can work normally in various environments, with....
  • MAIN PARAMETERS:The circuit board has a working voltage of 5V, an open circuit voltage of 6.2V, a working current of 0-60mA, a short-circuit current....
Check Stock

Rockville APM10W 10 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub,White

  • Rockville APM10W 10" 400 Watt Active Studio Subwoofer in White. 200 Watt RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF!.
  • The enclosure is 0.7" thick while the front board of it is a full 1.34" thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board.
  • Class "D" Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel. Rubber woofer surrounds increases sound quality and eliminates unwanted distortions..
  • We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum..
  • Thick "Wadding" protects inside the subwoofer cabinet - Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons..
Check Stock

315Mhz RF Switch Long Range DC 12V 4-Channel Wireless Remote Control Switch MELIFE 2 Transmitter & 1 Receiver for Garage Door Openers, Cars, LED Lights & More

  • ...ching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode..
  • ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level..
  • APPLICATIONS # It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
Check Stock

Rockford Fosgate P300-12T Punch 12 300 Watt Powered Truck Sealed Box Subwoofer

  • The Punch P300-12T is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or....
  • The 12" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 15" x 25.8"....
  • Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch.
  • The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Switchtec 3 Gang Rocker Switch Panel with 4.8 Amp Dual USB Fast Charger w/Voltmeter, Blue Backlit Led, Pre-Wired All in Surface Mount Box Enclosure.

  • 【Surface Mount Box】 Now with surface mount enclosure. This allows it to be mounted either on the dash board, under dashboard, or middle console. Application is endless. It's made of powder coated metal box with bracket that can rotate 360 degrees. This gives it more flexibility for different mount locations. Box dimensions are 2.677” x 3.0” x 5.220”.
  • 【4.8 Amps at 5 VDC】This $17.99 USB charger is installed and wired to the panel assembly can charge two devices simultaneously at fast speed. Built in safety to protect your devices from overcharging, excessive heat and current. Made of heat-resistant, Certified by CE & UL2089 with Over-load, Over-current and Short Circuit Protection to ensure charging safety, meanwhile, built-in Smart IC ensures the circuit won't be burnt out if wrong wiring..
  • 【Super Fast USB Charger】4.8 AMPS FAST DUAL USB CHARGE: It has 12-24 DCV input and power outlets are 2.4A each port (4.8A total) for fast charging. Amps is a measurement how fast electricity is moving. The bigger the amperage equals to faster charging. This makes this charger 40% faster than conventional chargers..
  • 【LED Voltage Display】 built in digital LED voltage monitor, dispalys the real-time accurate voltage status of your vehicle's battery f....
Check Stock