Top Circuit Board Cable Reviews

Seismic Audio SACB-16x4x25 16-Channel XLR Low Profile Circuit Board Snake Cable, 25-Feet

Low Profile Sub Snake Cable: Whether you have a permanent installation or mobile, this snake cable is rugged enough to handle whatever you throw at it. With circuit board technology you are ensuring a solid connection with your connectors..
Sub Snake Cable: The quality of your sound can only be as good as the connections between the stage & the mixer. With this snake cable, each pair of heavy duty conductors is individually shielded, yielding clear sound while rejecting extraneous noise..
XLR Splitter Cable: XLR connectors on the returns make this snake cable fit right in with professional power amps and mixing consoles without the need for converters or couplers. The cable is 15 feet long & has 25 gauge heavy duty conductors..
8 Channel Splitter: Connect 8 different channels to the stage box. The box connectors are XLR female and the fantail connectors are XLR male. The stage box from Seismic Audio Speakers is numerically labeled and has circuit board technology..
15 Foot XLR Cable: Awesome quality snake cables are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great..

Check Stock

FainWan SOIC8 SOP8 Flash Chip IC Test Clips Socket Adpter BIOS/24/25/93/95 Programmer

This product is suitable for the SOP8 chip of the pin distance was 1.27mm (24/25/26/93 Series)..
The clip was vulnerable devices, please be careful..
Used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need to take the chip of the circuit board..
Package include: 1x clip, 1x cable, 1x adapter board..

Check Stock

New USB Charging Port Socket Circuit Board with Power Switch Ribbon Cable for PS4 JDS 011 001 030 040 055 Controller (JDS-040)

Package Includes:1Pc USB Charging Port Socket Board with Flex Ribbon Cable.
Compatible with: Sony Playstation 4 PS4 JDS-040.
For Sony Playstation 4 PS4 Pro Controller USB Charging Board Socket Circuit JDS-001 JDS-011 JDS-030 JDS-040 JDS-050 with Ribbon Cable.
Micro-USB Charging Port Board for Sony Playstation 4 PS4.

Check Stock

4 in 1 Internal USB Splitter Cable Electop 9 pin USB Header Male 1 to 4 Female Extension Connector Adapter USB 2.0 HUB Connector Port Multiplier PWM Fan Splitter Cable 30cm/0.98ft

Product Type: 9 Pin, Main board USB 2.0 Male 1 to 4 Female.
Wide Applications: It can be widely applied to Host DIY Light Bar, Host Fan ,Extended USB Interface ,Other 9 pin USB 2.0 Support Devices..
Prevent Short-circuit: Prevent short circuit outlet design.To prevent accidental removal of circuit board,pins in case short circuit..
Easy Installation:Wire belt shielding,with 3M adhesive back glue, can be directly fixed on the main board or chassis..
Package Includes: 1* 9Pin USB Header Male 1 to 4 Female Extender,Cable Length(approx.) 30cm(11.8 Inch).Any questions,feel free to contact us via....

Check Stock

WSDMAVIS 1Set Ceramic Discs Mist Maker Atomization Plate with 5V Mini USB Humidifier Module Integrated Circuit Board Driver with Timing Switch DIY

High frequency oscillation,more finer particles,large and stable atomization amount, timing shutdown..
USB humidifier special micro hole atomization film, surface anti-oxidation silver layer protection coating, the front side is white piezoelectric ceramic ring, the back is all steel material, waterproof solder joint, to prevent open circuit..
Diameter of outer silicone ring: about 20mm.
Our atomizer plate with 5V frequency driver board, it is more convenient compared with other product. You can start the board via the button after power the module.The atomizer plat should be used with the same frequency circuit board so as to achieve the ideal spray volume..
Please refer to the picture for the detailed information of the circuit board structure diagram, wiring diagram and atomizer size diagram..

Check Stock

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
4.Direct drive extruder, great support for flexible filament..
5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..

Check Stock

AudioQuest X2 Unterminated White Speaker Cable - 100 ft. (30.48m)

...ve conductors are covered with partially conductive Carbon-Loaded Polyethylene. This remarkable material reduces radio-frequency garbage being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and improved dimensionality that comes whenever RF interference is reduced in an audio circuit..
Foamed-Polyethylene Insulation (For All Positive Conductors): Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. This cable, however, uses air-filled Foamed-Polyethylene Insulation on both conductors..

Check Stock

PBD 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter

Internal circuit board for better reliability/durability.
coaxial cable splitter splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.
Low signal loss of 3.5db on each output port improving performance and speeds.

Check Stock

PBD 4 Way HD Digital 1Ghz High Performance Coax Cable Splitter

Internal circuit board for better reliability/durability.
coaxial cable splitter splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.
Low signal loss of 3.5db on each output port improving performance and speeds.

Check Stock

5 PACK Filter, MoCA

The products include the following items: 2-Way Coax Cable Splitter 5-2300MHz Coax POE Filter.
2 Way Coax Cable Splitter5-23 00 MHz (2.4GHz) RF bi-directional digital coax/coaxial cable splitter for CATV, satellite and MoCA configurations ..
2 Way Coax Cable SplitterInternal circuit board for better reliability/durability.Low signal loss of 3.5db on each output port improving performance and speeds..
POE Filter Bandstop provides a typical 35-45dB of rejection in the MoCA 1125-1525Mhz band. IEEE 6KV A3 surge survivablity is provide for additional network protection..
POE FilterDevice's technology is recommend for TiVO Whole House DVR applications.Signal loss in the Cable TV ops band of 5-1002MHz is 1.5dB or less.

Check Stock

LEFELWEL Upgrade M365 Pro Dashboard Cover Replacement Circuit Board for Original Xiaomi M365 /M365 Pro Electric Scooter Parts Accessories

【Compatible with Two Models】 The newest model of Circuit Board has a screen cover design that is fit for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. The Circuit Board is a replacement of Xiaomi M365/M365 Pro Electric Scooter..
【Upgrad Model of Circuit Board】 This is the newest model of Circuit Board with a screen cover, designed for Xiaomi Mijia M365 and Xiaomi M365 Pro electric scooter. No need to do any firmware upgrade after you replace the Circuit Board..
【High Quality and Durable】 The M365 Pro dashboard is made of high quality metals and PCA materials，fully compatible with xiaomi m365 and pro scooter accessories.
【Functional Appearance】 The newest model of Xiaomi M365 / M365 Pro circuit board has a cool, clear display dashboard that shows all the functionality and speeds. This product is perfect to work with the electric scooters. Economically practical with more safety and convenience..
【Packing list】 1 Circuit board for M365/Pro Scooter, 1 replacement cover ,1 tool and screw,.

Check Stock

1 to 3 Cable Daisy Chain Guitar Effect Pedal Power Supply Splitter Cable Adapter

♪ 9V DC daisy chain cable, 3-plug power cord divides 1 power source into 3 power sources, and can connect 3 pedals to the power source. It is definitely a must-have for your pedals..
♪ The daisy chain cable is equipped with a 26AWG oxygen-free copper core, which can realize pure power transmission and noise isolation..
♪ The maximum distance between each plug is 0.82 feet, which makes it easy and convenient to connect the pedals on the board..
♪ The wire diameter of the cable is 3.5mm, and the 3 right-angle plugs make your connection orderly and make your circuit board neat and tight..
♪ pigtone is a brand and professional manufacturer of guitar pedals and pedal power supplies. We have our own production and R&D factories, engineers and guitarists. If the product you receive is not ideal, please contact us for a solution..

Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

...e on back and multiple links to buckle..
【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit test..

Check Stock