Top Chrome Plated Valve Reviews

CGOLDENWALL Eye Wash Station Wall Mounted Eyewash Station Eye Face Washing Station for First Aid 304 Stainless Steel+ABS coating+Eye Wash Sign, NPT thread

15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Tank has about 10 gallons usable capacity.
Two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. 1/2” IPS chrome plated brass stay-open ball valve with flag handle.
Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced PVC hose.
Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field.

Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

... the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness without leakage. It is recommended to tighten the sealing caps quickly after use to prevent air leakage....

Check Stock

Edelbrock 4462 Signature Series Chrome Valve Covers - Set of 2

Triple chrome plated for a lasting good look.
T+P882he Edelbrock logo is embossed on the top of the valve cover.
Covers the valve train and can be removed to adjust the valves.

Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

...e with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets..

Check Stock

Brass Shower Arm Diverter Valve for Hand Held Showerhead and Fixed Spray Head,G 1/2 3-Way Bathroom Universal Shower System Replacement Part(Polished Chrome)

...ter outlets (connect to handheld shower & fixed shower head)..
✔【High Quality Metal Material】：Made of One-piece brass metal construction body material, high pressure and high temperature resistance. Solid, seamless, heavy-duty and premium quality. The shower arm diverter is well-designed with bright polished chrome plated, resists corrosion and abrasion, built to last..
✔【3 Way Shower Arm Diverter】：This shower diverter is a 3 way shower valve, functionally and conveniently. When handle is backward 180°, handheld shower discharges water.
When handle is forward 180°, fixed spray head discharges water.
When handle is upward 90°, both two shower heads discharge water simultaneously..
✔【Easy Operation & Control】：This shower head diverter valve is designed with a metal handle lever to switch water between handheld shower and fixed spray head smoothly. Easy to operate and effectively to control water from both two shower heads (Can not shut off water). Allowing you to choose different showering to meet your needs..
✔【Shiny Chrome Finish】：Made with sparkling polished plated, this 3 way chrome shower diverter perfectly matches with most other bathroom fixtures to make your bathroom look more upgraded..

Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..

Check Stock

Nipple, 2 X 6 In

Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.

Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

PRO SERIES DUAL GAUGE REGULATOR: This Kegco 542-2 Pro Series Two Product Dual Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense two kegs at the same pressure! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of t....

Check Stock

First Alert Fire Extinguisher, Car and Marine Fire Extinguisher, White, FE10GR

RUGGED - Six-year warranty, Dependable drawn steel cylinders, Stored pressure design, All-metal valve construction, Durable high gloss polyester powder paint.
BRASS VALVE | HEAVY DUTY - Chrome-plated brass valve body, Stainless steel handle and lever.
ALUMINUM VALVE | LIGHT TO MEDIUM DUTY - Anodized aluminum valve body, Anodized aluminum handle and lever (Temperature range from -65° F to 120° F).
USER-FRIENDLY - Easy and more economical to maintain and service, Large loop pull pin, Bar coded and bilingual labels.

Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

...ATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what’s left in the Co2 tank, so you don’t run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending i....

Check Stock

Mr. Gasket 4354 Deep-Dish Air Cleaner

Features a deep-dish, highly polished, chrome top accented by a chrome-plated wing nut.
Includes PCV (Positive Crankcase Ventilation) valve assembly.
Designed to fit 1 and 2-barrel carburetors with 4 diameters and 2-5/16 or 2-5/8 diameter necks.
Flame-retardant, replaceable, paper element with a high CFM rating is used for safety.
Top and base material is made of steel with chrome finish.

Check Stock

Haltec Water Adaptor for Liquid Fill Tires

★Universal schrader valve adapter will fit all passenger cars, light and heavy trucks,motorcycles,Trailers,RV and recreational vehicles with....
★ These tyre valve extension adaptors are made of brass, chrome plated on the surface,comes with metal dust cap, excellent sealing capacity with....
★ The adaptor screws onto your tyre valve and the right angle bend allows easy access for the pump or airline. Increasing life of original tyre....
★Allow inflation/deflation due to built-in valve core. Package contents: 6 pack of valve stem adapto.
★All of our products are strictly tested and we do not allow any product to leak , please be assured the purchase. If there is air leakage or other....

Check Stock

YOO.MEE Shut-Off Brass Ball Valve 1/2'' Standard Connections with Polished Chrome Finish

Used as shut-off valve or water saving adjustable valve.
On/ Off Switch with Quarter-turn easy operation.
Solid Grade Chrome Plated for Surface-Protection.

Check Stock