Top Chrome Pipe Reviews

Mahogany High Tank Pull Chain Toilet Conversion Kit With Z-pipe

MATERIAL - Transform your existing bathroom toilet bowl into a high tank pull chain toilet using these high-quality Hardwood High Tank Kit. It is stained with a beautiful Mahogany finish. Toilet seat and bowl not included..
VINTAGE HIGH TANK - Our Victorian style Top Entry Raised Panel High Tank Pull Chain kit can be installed over any top entry toilet bowl. Its adjustable height Z Pipe can fit in almost all home bathrooms. All tanks are water-saving 1.6 GPF..
DIMENSION - Adjustable Total Toilet Height = 59 to 74 In., High Tank = 23 In. Width, 15 In. Height, 10.5 In. Projection, Pipe Finish = Chrome. Will require a toilet bowl bolt boring of a 5 1/2 In (confirm bolt boring to ensure compatibility)..
CONVERSION KIT INCLUDES- Hardwood High Tank, Plastic Liner, Chrome Mounting Hardware and Pull Chain, Chrome Plated 100% Stainless steel Z-Pipes and Supply Lines, Top Entry Wood Piece and its Plastic panel..
GRAVITY ACTIVATED TOILETS - Designed to fit most bathrooms with a Rough-In of 12 Inches. Experience one time, quiet and efficient, gravity-activated flush, SIPHONIC-ACTION washdown. These are carefully wrapped to avoid any scratches in the transit..

Check Stock

LASCO 03-1563 Chrome Plated Floor and Ceiling Split Flange Fits 2-Inch Iron Pipe

Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
Measurements – Hole diameter is 2.38 inch (60.33mm) and outside diameter is 4.53 inches (115mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
Fittings - Fits 2 inch IPS (2.375" Outside Diameter) Galvanized Pipe or 2-1/4 (2.25" Outside Diameter) inch Copper Pipe. Perfect for bathroom and kitchen tubular pipes..
Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..

Check Stock

Newport Brass 502 Tank Lever for Kohler Highline Toilets, Antique Copper

...Strong White Grade A Vitreous China ceramic is used to build the elongated toilet bowl. The protective RENO-GLOSS finish of toilet bowl resists stains. The High Tank is constructed out of Light Oak Hardwood . All the Rare entry pipes are built using rust resistant 100 % Stainless steel polished by Tarnish resistant Chrome Finish. .
DIMENSIONS - Adjustable Total Toilet Height = 70- 74 in., High Tank = 23 in. Width x 15 in. Height x 10.5 in. Projection, Elongated Toilet Bowl = 27 in. Projection x 17 in Height. The Wooden Toilet Seat is Not Included, it is Sold Separately..
VICTORIAN HIGH TANK TOILETS - Add a unique touch of old world Colonial style to your bathroom with our High Tank Pull Chain Water Closets. These not only bring the traditional charm, but also saves up to 25,000 gallons of water a year. The L-pipe High Tank Toilet water saving 1.6 GPF.(Gallons Per Flush) - Eternal Eco Friendly High Tank Pull Chains Toilets!.
GRAVITY ACTIVATED VINTAGE TOILETS - Experience One time flush, quiet and efficient, gravity-activated, Siphonic-Action wash down. The Perfect-Height bowl reduces daily body strain. These are designed to fit most bathroom with an adjustment overall height from 70-74 inches. The Adjustable Rough-In is 12 in. to 15 in. Chrome Flush a....

Check Stock

Armour Line RP77171 Internal Plastic Pipe Cutter, 1-1/4 in Or Larger Diameter (Single Pack)

PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
FLUSH CUT – Allows for a flush cut to the ground..
REQUIRES – Use on plastic pipe only. Requires a power drill for use..

Check Stock

Stainless Steel Car Exhaust Tip, 2.5″ to 3.3″ Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Blue/A Style)

Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
Size: The size of the tail pipe is 2.5″ x 3.3″ x 5.5″. It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It’s easy to do it yourself in just 5 minutes!.
Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..

Check Stock

Kuryakyn 9931 Bluegrass Breather Catch Tank for Harley-Davidson Motorcycles, Chrome

Features banjo fittings and chrome tubes that route the vented gasses upward so gravity can keep any expelled oil droplets in the engine.
Helps in venting expelled oil from the cylinder heads.
It is recommend to vent the crankcase in open air by running the vent line up and out of sight beneath the tank.
Includes (1) Chrome Catch Tank Assembly, (1) Chrome - LIL Tank, (1) Chrome - LIL Tank Inlet Rib, (1) Rubber Gasket, (1) Vent Pipe, (1) Oil-Safe Sponge, (1) Hardware Kit.
Suggested for installation (not Included): allen wrenches.
Compatible with Harley-Davidson models: Using the Bluegrass Breather Kit.

Check Stock

Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Multicolor/B Style)

Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
Size: The size of the tail pipe is 2.5" x 3.3" x 5.5". It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It's easy to do it yourself in just 5 minutes!.
Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..

Check Stock

Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Silver/A Style)

Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
Size: The size of the tail pipe is 2.5" x 3.3" x 5.5". It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It's easy to do it yourself in just 5 minutes!.
Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..

Check Stock

[10-Pack] PROCURU 1/2-Inch (5/8\ OD) CTS Escutcheon Wall Cover, Chrome-Plated Steel with SureGrip, for 1/2\ Copper Pipe and 1/2\ PEX Tubing

For 1/2" CTS Nominal Copper Pipe (5/8" OD).
For concealing gaps around water supply pipe.
SureGrip fingers allow small adjustements to pipe for snug fit.

Check Stock

Superior Tool 06010 Smooth Jaw Pipe Wrench Pliers

Smooth jaws protect chrome, brass and decorative fittings.
Special smooth jaw design for work on brass or plated finishes without scratching.
High strength nickel chrome steel with cushioned grips.

Check Stock

Exhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip

1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
2.00 Inch Diameter Pipe 8.00 Inches Long.
Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.

Check Stock

Floor and Ceiling Plate Cover Split Flange Replacement and Repair Kit, Fits 3/4 Inch IPS Galvanized Pipe or 1 Inch Copper Pipe, Chrome Finish (Pack of 6)

Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
Measurements - Hole diameter is 1.05 inch (26.67mm) and outside diameter is 2.83 inches (72mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
Fittings - Fits 3/4 inch IPS (3/4" Outside Diameter) Galvanized Pipe or 1 (1" Outside Diameter) inch Copper Pipe. Perfect for bathroom and kitchen tubular pipes..
Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..

Check Stock

WeiSen Chrome 12' Ape Hanger Horn Easy Wire Handlebar Compatible with Harley Dyna Softail Sportster XL 883 1200 & 1994-2022 Road King & 1998-2013 Road Glide

Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2022 Road King Model & 1998-2013 Road Glide..
Material: Steel pipe (Much Stronger than other’s Straight Seam Welded pipe handlebar on the market)Surface Finish: Triple Plating (Copper+Nickle+Chrome) ,High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Bar Diameter: 1-1/4 inch (1.25″). Center Width: 12 inch, Knurl Center to center Width: 5.4 inch & Clamp area Diameter: 1 inch. Grip Area Diameter: 1 inch. End Rise: 12 inch. Overall Width: 30.5 inch. Pullback/Sweep: 8 inch..
Model: Horn Ape Hanger Chizeled,Edge Cutting design for easy wiring. Pre-Drilled and Notched for TBW(Throttle By wire)..
Package Included: 1x Chrome 12″ Ape Hanger Chizeled Easy Wire Handlebar.

Check Stock