Top Chemical Separation Reviews

ACE GLASS 3978-07 Series Receiver Bottom Drain Valve for Rotary Evaporator

  • Intelligent constant temperature, temperature control, high temperature resistance, corrosion resistance..
  • Rotary evaporator used in medicine, chemical industry, biological products, environmental protection and other industries..
  • It is an indispensable instrument in the process of evaporation, concentration, crystallization, drying, separation and solvent recovery..
  • The glass rotating bottle is rotated at a constant speed by an infinite speed regulation..
  • It is especially suitable for the concentration and purification of biological products which are easily decomposed and denatured at high temperature..
Check Stock

Infusium Pro 23 Treatment Original 33.8 Ounce (999ml) (6 Pack)

  • Includes a Sleek Steel Pin Rat Tail Comb for easy and precise application while providing separation of hair ! Provides professional results! Anti-Static Metal Pin can be used for sectioning, parting, and styling the hair..
  • Infusium 23 Original Pro-Vitamin Leave-In Hair Treatment (33.8 oz) infuses hair with a Pro-B5 Vitamin formula to deeply penetrate and repair the hair cuticle layers from damage. Improves the manageability of hair for better styling and increased shine and luster, while it detangles and strengthens, helping to protect against breakage. Original Leave-In Treatment formula is lightweight, so it won't weigh hair down..
  • Can be used immediately following chemical processing to help seal the cuticle, leaving hair healthy-looking with superb manageability and shine. Detangles while adding manageability and shine Use after a chemical service to help seal the cuticle Protects against split ends and breakage..
  • Original Pro-Vitamin Leave-In Hair Treatment infuses hair with a Pro-B5 Vitamin formula to deeply penetrate and repair the hair cuticle layers.
  • Improves manageability of hair for better styling and increased shine, while also detangling and strengthening to protect against breakage.
Check Stock

BVV 1.5 Gallon Cold Trap (2QT Tank) Dry Ice, Liquid Nitrogen-1/4\ Flare

  • Intelligent constant temperature, temperature control, high temperature resistance, corrosion resistance..
  • Rotary evaporator used in medicine, chemical industry, biological products, environmental protection and other industries..
  • It is an indispensable instrument in the process of evaporation, concentration, crystallization, drying, separation and solvent recovery..
  • The glass rotating bottle is rotated at a constant speed by an infinite speed regulation..
  • It is especially suitable for the concentration and purification of biological products which are easily decomposed and denatured at high temperature..
Check Stock

Scicalife Separating Funnel 250ml Graduated Separatory Funnel with PTFE Stopcock Valve Lab Quality Borosilicate Glass for Lab Use

  • Made of high quality borosilicate glass, tapered design ensures effective separation..
  • Autoclavable, with superior chemical durability, very easy to use..
  • Strong corrosion resistance and long service life, no easy to burst..
  • A 250ml separatory funnel and a standard taper with PTFE stopcock..
  • Used in the laboratory, can separate liquids of different densities..
Check Stock

Baluue Borosilicate Glass Separatory Funnel Pear Shaped 125ml Heavy Wall Conical Separatory Funnel Separation Funnel for Chemistry Laboratory Accessory Transparent

  • A 125ml separatory funnel and a standard taper with glass stopcock..
  • Autoclavable, with superior chemical durability, durable and easy to use..
  • Made of high borosilicate glass, tapered design ensures effective separation..
  • Strong corrosion resistance and long service life, no easy to burst..
  • Used in the laboratory, can separate liquids of different densities..
Check Stock

10L Rotary Evaporator Electrical Lift Hemp Oil Distillatio Solvent Lab Rotovap with Chiller and Pump

  • 10L Rotary Evaporator ,Standard :10L Rotary Flask Ball-Milling Connection of Collecting Bottle, Bath Temperature Range: 0-99℃. Easy to Detach And....
  • 110V/60Hz 220V/50Hz Bottle Rotary Speed: 0-130rpm, It Is Easy to Adjust By Buttons On Control Center..
  • High Quality Material Made Water Bath, Water Bath Auto Lifting Control, 160 mm.
  • Perfect for The Concentration, Crystallization, Drying, Separation And Solvent Recovery of The Pharmaceutical, Chemical and Biological Pharmaceutical....
  • 1 Year Warranty ,Free shipping ,Delivery period 5-12 working days.
Check Stock

Chuck-EEZ Chuck Lubricant 16 oz. Cartridge

  • Shell Omala S2 G oils are formulated to resist thermal and chemical breakdown throughout the maintenance interval. They withstand high thermal loading and resist the formation of sludge to provide extended oil life capability, even with bulk oil temperatures of up to 100°C in certain applications..
  • Excellent load carrying capacity reduces gear tooth and bearing wear on both steel and bronze components..
  • Shell Omala S2 G has excellent corrosion protection, protecting both steel and bronze components, even in the presence of contamination by water and solids..
  • Maintaining system efficiency Shell Omala S2 G oils have excellent water separation properties, such that excess water can be drained easily from lubrication systems to help extend the life of the gears and ensure efficient lubrication of the contact areas..
Check Stock

MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 15 Gram Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

  • Low temperature solder paste with non clean flux.
  • The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 μm) particle sizes.
  • Store refrigerated between 2–10 °C [35–50 °F] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use.
Check Stock

Labvida 2pcs of Safety Wash Bottles, Vol.500ml 17oz, Isopropanol Wash Bottle, LDPE Material, LVM003

  • Volume and Quantity: 500ml (17oz), 2pcs..
  • Material: Bottle is made of LDPE(Low Density Polyethylene) material, Draw tube is made of PP(polypropylene)..
  • Appearance: Including Chemical name, ICS, GHS, CAS numbers, NFPA codes and symbols, and target organs information..
  • Convenience to use: Dispense uniformly through the top with a closure and stem molded in one piece for leak-proof service. Tip can be cut back to provide increased flow. Tight fit of draw tube and closure prevents separation when squeezing bottle..
  • Application: Suitable for use in chemistry and biology, as well as in pharmaceutical and scientific testing..
Check Stock

6pcs Dental Lab Silicone Plaster Model Former Base Molds Mould S+M+L Size Tray

  • Glossy inner surface makes model separation easy and speeds clean-up. Thicker walls maintain their shape during vibration. Perfect for lab work..
  • Former base molds can save a lot of time to make casts in the lab. Get great looking models without the hassle and mess normally associated with model trimming..
  • 6pcs (3 Upper+3 Lower) in different sizes (Small/Medium/Large), meet your different needs..
  • Model base, designed for storing impression tray, keeping them clean and sanitary. Built-in lingual contoured edge with gap for tray handle clearance..
  • Silicone teeth model base former, Durable enough for a long time use. Safe silicone rubber material, no chemical smell giving off..
Check Stock

E-outstanding 8Pcs Plastic Lab Keck Clamps for 24/29 24/40 Joint Glass Standard Conical Interface Clip Ground Glass Joint Laboratory Accessory, 24mm Green

  • Made of plastic, light weight, durable, smooth surface, abrasion resistance and chemical..
  • It is used for glass grinding joints, which will not scratch the glass, and is suitable for fixing the frosted mouth of glass instruments..
  • It is very suitable for fixing glassware joints and avoiding expensive damage caused by joint separation..
  • Firmly fixed and easy to install. Very suitable for fixing water pipes, distillation kits, condensers, and flasks..
Check Stock

MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 25 Gram Pneumatic Dispenser (Complete with Plunger & Dispensing Tip) (4902P-25G)

  • Low temperature solder paste with non clean flux.
  • The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 μm) particle sizes.
  • Store refrigerated between 2–10 °C [35–50 °F] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use.
Check Stock

Labvida 2pcs of Self-Venting Safety Wash Bottles, Vol.500ml 17oz, Methanol Wash Bottle, LDPE Material, LVM002

  • Volume and Quantity: 500ml (17oz), 2pcs..
  • Material: Bottle is made of LDPE(Low Density Polyethylene) material, Draw tube is made of PP(polypropylene)..
  • Appearance: Including Chemical name, ICS, GHS, CAS numbers, NFPA codes and symbols, and target organs information..
  • Convenience to use: Dispense uniformly through the top with a closure and stem molded in one piece for leak-proof service. Tip can be cut back to provide increased flow. Tight fit of draw tube and closure prevents separation when squeezing bottle..
  • Application: Suitable for use in chemistry and biology, as well as in pharmaceutical and scientific testing..
Check Stock