Top Chemical Injector For Pressure Washer Reviews

Pressure Washer Manifold Kit Fits for Briggs Stratton | OE Replacement 16031 190627GS 190574GS 020228, with 4 Bolt Power Pressure Washer Pumps

  • ...e of the pressure washer pump can be inserted completely inside to make the pin more secure, the sturdy alloy casing helps protect the washer pump from damage, advanced manufacturing technology, high reliability and high performance, standard size, can be easily installed without leakage..
  • The Method of Installing a Chemical Injector: The tools that need to be prepared include a half-inch wire wrench or a half-inch sleeve, and a long and thin tool for penetrating into narrow places. Use a half-inch line wrench or socket to remove the old chemical syringe from the pump. Make sure that the spring and ball are removed from it and not left in the pump manifold. Install the O-ring and the inside, use a tool to install the O-ring into the internal groove of the injector..
  • Package List: 1 × chemical injector + 1 × inlet check valve + 4 × mounting bolts + 4 × mounting o-rings, please compare with your old high pressure washer manifold kit when you buy, and then buy it..
  • Customer Service: You will get 24-months service, hassle-free return and money back policy, buy with confidence! If you have any questions, please contact us by email, we will reply you within 12 hours..
Check Stock

Tempono Pressure Washer Soap Injector Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit 4000 PSI 3/8 Inch Quick Connect

  • Pressure chemical injector ensures that chemicals do not pass through the pump. Protect the performance of the pump and extend its service life..
  • Chemical injector kit has 10 ft tube, soap injector, filter, nozzle and teflon tape. Max pressure is up to 4000 PSI..
  • Chemical injector has an metering valve. You can control the concentration of the liquid. Flow rate is 2 to 5 GPM..
  • Downstream injector for pressure washer with 3/8 inch quick connector. Please pay attention to mark of arrow direction on injector, do not install it....
  • The coupler is made of stainless steel and brass, sturdy and durable. Siphon hose is made of high-quality PVC, suitable for hot and cold water..
Check Stock

Ultimate Washer Adjustable Soap and Chemical Injector Pressure Washer, 3/8-Inch, 4000 PSI, 2-5 GPM

  • Soap and Chemical Injector, 200 Degree, 4000 PSI, 2-5 GPM.
  • Works with Standard3/8-Inch Quick Connect Pressure Washers.
  • Pressure Washer Chemical Injector Kit Includes Injector, Tubing and Filter.
  • Black Soap Nozzle (not included with kit) is required for proper operation. Great for Cleaning or Spraying, Compatible with Most Brands.
Check Stock

Mingdun 4 Bolt Replacement Manifold Pressure Washer Manifold Kit with Unloader for 16031 190627GS 190574GS 020228 EXWGV1721

  • Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS..
  • Package included: 1*Chemical Injector 1* Inlet Check Valve 4 *Mounting Bolts 4 *Mounting O-Rings.
  • Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS. Package Include:1 Chemical Injector, 1 Inlet Check Valve, 4 Mounting Bolts, 4 Mounting O-Rings..
  • Replaces: Part #16031 190627GS 190574GS..
  • Note: Please review all the product information to ensure that this product is compatible with your original unit. And you can feel free to contact us if you have any questions about our products..
Check Stock

Raincovo Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit Soap Injector 3/8 Inch Quick Connect 4000 PSI

  • Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape..
  • Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without....
  • Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and....
  • Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer..
  • Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000....
Check Stock

Tool Daily Pressure Washer Siphon Hose and Filter for Soap and Chemical Injector 10 Feet Tubing 2 Filters

  • Pressure washer chemical injector tubing kit includes 10 feet replacement tubing, two filters. The tubing can adjust and cut based on your needs..
  • ATTENTION: Siphon Hose: Inside Diameter: 7.0 mm.
  • Application: Used to siphon detergent out of separate container. It allows for a wider choice of chemicals..
  • The filter can avoid contaminants enter the pressure washer hose, pump or gun..
  • Works with most brands of gas and electric pressure washer..
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

Partman Fit for 190627GS 16031 Excell EXWGV

  • Pressure Washer Manifold Kit 16031 190627GS 190574GS.
  • Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
  • To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
  • Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

The ROP Shop 7/8" Shaft, Aluminum Head, Vertical Pump Replacement for Pressure Washer with 2800 PSI and 2.3 GPM, Includes Keyway

  • The ROP Shop replacement 7/8″ Shaft, Aluminum Head, Vertical Pump for Pressure Washer with 2800 PSI and 2.3 GPM.
  • Specs – Maximum Pressure: 2800 PSI, Maximum Flow: 2.3 GPM, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 7/8″ Vertical Shaft. Refer to images 2 & 3 for more information.
  • Includes – (1) Pump, (1) Keyway & (1) Thermal Release Valve.
  • Pump comes with built in Unloader & Chemical Injector.
  • When installing, please ensure that the keyway is installed before running your pressure washer.
Check Stock

The ROP Shop 3/4" Shaft, Horizontal Triplex Pump Replacement for Pressure Washer with 3600 PSI and 2.5 GPM, Includes Keyway

  • The ROP Shop replacement 3/4″ Shaft, Horizontal Triplex Pump for Pressure Washer with 3600 PSI and 2.5 GPM.
  • Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
  • Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Sight Glass.
  • When installing, please ensure that the keyway is in place before running your pressure washer.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ... 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

CQYD New 190574GS Manifold Kit For 16031 190627GS Craftsman Excell EXWGV1721 Pressure Washer +

  • Pressure Washer Manifold Kit 16031 190627GS 190574GS.
  • Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
  • To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
  • Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the OEM manifold.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock