Top Chemical Anchor Bolt Kit Reviews

Anchor & Escutcheon Pool Rail Set, 4-Inch Anchor for 1.90-Inch Outer Diameter Tubing- Two Pack

  • Convenient pool rail or ladder anchor and escutcheon kit: includes 2 bronze anchors and 2 escutcheon plates.
  • Escutcheon plates hides the anchor and gives a finished look to a rail.
  • Bronze anchors are 4″ deep, accommodates 1.90″ diameter rails.
  • 1/2-inch tall and accommodates 1.90″ diameter rails.
  • Kit is necessary to install a pool rail or ladder on a pool.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ...ion to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, speed bumps, signage, lights, parking barriers, and many more asphalt mounting applications..
  • EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole deep into th....
Check Stock

Glarks 42Pcs 6 Size Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall Plaster and Tile

  • ★【Product Type】: High quality heavy duty molly bolt drive hollow drive wall anchor screws kit..
  • ★【Package】: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage..
  • ★【Material】: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, strong and durable enough for you to hanging items..
  • ★【Feature】: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ★【Application】: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Glarks 60Pcs Heavy Duty 1/8 inch 35/46/59mm Zinc Plated Steel Molly Bolt Drive Hollow Drive Wall Anchor Screws Assortment Kit

  • ♛ Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws assortment kit..
  • ♛ Package: In this kit, it include 3 size of 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm each for 20pcs, total 60pcs drive wall anchors packed in a durable plastic box, convenient for your use and storage..
  • ♛ Quality: All the anchors are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ♛ Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ♛ Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 4

  • Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 6

  • Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 24

  • Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 13

  • Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

  • Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Lag Bolt Kit for Mounting TV Bracket Into Wood or Concrete Wall Heavy Duty Bolts Anchors and 2 Drill Bits

  • Application: The lag bolt kit fit for concrete wall, wood studs and brick wall.
  • Material: High quality plastic anchor, Zinc plated lag screws and alloy steel drill bits.
  • Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits.
  • Note: Concrete anchors are not compatible with wood and drywall.
Check Stock