Top Check Tool Reviews

Legends Card Grading Centering Tool with Cleaning Cloth Kit Material for PSA - BGS - Graded Card Submissions Card Center Tool

PERFECT CENTERING IS A MUST! - Save money on card grading fees with our card grading tool. You can easily determine if your card meets the centering requirements for PSA or BGS submission. Works with any standard sports card or TCG card games including Pokemon, MTG, or Digimon..
REMOVE PROTECTIVE COVER ON PLASTIC BEFORE USE! - Our tool ships with protective covering on both sides to ensure that your tool is not scratched when you receive it..
BEST MATERIAL ON THE MARKET! - Our tool is made with a high quality crystal clear acrylic material that won't warp, smear, bend, or crease..
EASY TO USE! - Our centering guide is easy to use, simply place over the card you wish to check, take the measurements, and reference the centering tool percentages guide. With our card grading tool you can check the centering from left to right and top to bottom..
INCLUDES BONUS CLEANING CLOTH! - You can wipe your cards down before using the tool to prevent any damage and throw them right in a sleeve for grading!.

Check Stock

Autel MS309 Universal OBD2 Scanner Engine Fault Reader, Read Clear Codes, View Freeze Frame Data, I/M Readiness Smog Check CAN Diagnostic Scan Tool

TURN OFF CHECK ENGINE LIGHT: Autel MS309 OBDII scanner is an easy-to-use plug-n-play check engine code reader that read and clear codes. This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT color screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light)..
FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This MS309 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc..
READINESS STATUS TO PASS SMOG CHECK: The Autel MS309 car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components mon....

Check Stock

Lisle 50850 Ignition Spark Tester

A handy tool to check ignition spark without removing the spark plug..
The tool is specially calibrated to measure ignition voltage..
Works on both standard and electronic ignition systems. Easy to use..
Simply adjust calibration screw to proper gap size..
Attach spark plug wire to end of tester..
Clamp tester on engine to ground. Crank engine and check for spark..

Check Stock

INNOVA 5210 - Newest 2022 OBD2 Diagnostic Code Scanner - Read/Erase ABS Codes, Reset Oil Lights, Live Data, Battery/Charging System Test

EASILY SCAN, READ AND RESET CHECK ENGINE LIGHTS, ABS(Brake) CODES & MORE - Innovas 5210 OBD2 scanner empowers the home mechanic with its professional-level functionality. This car diagnostic tool not only reads and clears OBD trouble codes it also displays all vehicle information from when a trouble code was triggered. Works on any foreign or domestic 1996 or newer OBD2 car, light truck, SUV, or hybrid vehicle. Supports English, Spanish or French..
THE DEVICE IS GREAT BUT THE DATA IS BETTER - Innova has best-in-class data to help you Find the Problem and Fix the Problem. The 5210 code reader comes with the RepairSolutions2 -- a unique app that gets you the information you need to keep your vehicle on the road. Get verified fixes, find and purchase the exact part required for repair, schedule maintenance, receive technical bulletins, recalls, and more..
LIVE DATA FOR MORE ACCURATE DIAGNOSIS - With the Innova 5210 OBD2 reader you can see your vehicles essential information like RPM, speed, and oil temperature in real time to help identify and correct problems. You can also check and test your battery and alternator, so you know whether you need to bring your car to a technician or not..
KNOW YOUR SMOG CHECK RESULTS BEFORE YOUR STATE DOES - More than just ....

Check Stock

VDIAGTOOL VD10 OBD2 Scanner Car Code Reader Smog Check Engine Fault Code Reader Live Data Freeze Frame Vehicle Voltage Test Turn Off Check Engine Light

【Easy to use & Diagnose in seconds】The auto scan tool is easy to use for the beginner, even those beginner can use it to read the trouble....
【Turn Off Check Engine Light】The VDIAGTOOL VD10 obd scanner diagnostic tool give a fast access to scan, read the error code and clear trouble....
【Mechanic approved + 7 Languages】The obd scanner tool works on all OBDII compliant Vehicles, include 1996 US-Based 12 voltage cars SUVs light....
【I/M Readiness to Pass the Smog Check】The car sensor reader is equipped with I/M readiness function check the operations of the Emission System on....
【12V Battery detection】The vehicle scanner can read battery voltage, and then analyze battery healthy status ,which is designed for detecting your....

Check Stock

ChgImposs Imperial Screw Pitch Gauge, 55 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 4-48 Blades Range

It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
Measuring Range: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 19, 20, 22, 24, 28, 40, 48.
It is useful to check the tool angle when cutting threads on a metal lathe.
Check the angle on the thread cutting tool on the V-groove of the gauge.
All 20pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.

Check Stock

Autel Scanner MaxiTPMS ITS600 TPMS Tool, Updated from Autel TS508/TS601/TS608, Top TPMS Relearn & Sensor Programming Tool with 4 Special Functions(Oil Reset, BMS, SAS, EPB), VIN Scan & Tire Service

【2023 Newest Upgrade TPMS Tool of TS501, TS408, TS401】As a newest upgrade, Autel TS508 has packed almost ALL TPMS functions including one step TPMS health check, read & clear TPMS codes, on-screen DTC description, reset TPMS warning light, activate/relearn both OE and aftermarket TPMS sensors, read sensor data, program Autel MX-sensors, and unique features like check key fob frequency, quick/advanced mode, Tire Type/ Pressure Selection for faster & better TPMS repairs & services..
【Activate/Relearn TPMS Sensors】To turn off the TPMS warning light after replacement, you need to relearn the sensors! Autel TS508 TPMS Reset Tool can wirelessly activate & relearn all OE or aftermarket TPMS sensors. TS508 can retrieve TPMS sensor data like Sensor ID, Tire Pressure, Tire Temperature, Sensor Battery, Sensor Position, Frequency, etc and provides you with 3 ways of on-tool relearn procedures: 1. Stationary Relearn. 2. Automatic Relearn. 3. Relearn by OBD (not included in TS508)..
【Program Autel MX-Sensors】Autel TS508 TPMS Programming Tool allows both DIYers and auto technicians to program sensor data to Autel MX-sensors(315/433MHz) in no time! TS508 comes with 4 TPMS sensor programming options: 1. Copy By Activation, 2. Copy By Manual Input, 3. Auto C....

Check Stock

OriGlam R0.3-1.5 Radius Gauge Set, Stainless Steel Metric Radius Gauge Fillet Gage, Portable Concave Convex Measuring Tool for Tool and Die Makers Check

【High Quality】All the radius gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance..
【Measuring Range 】R0.3-1.5mm is 0.3/ 0.4/ 0.5/ 0.6/ 0.7/ 0.8/ 0.9/ 1.0/ 1.1/ 1.2/ 1.3/ 1.4/ 1.5..
【Scope Application】This radius gauge is widely used in home improvement, machine installation, Electric equipment, Suitable for tool and mold manufacturers, Mechanics and many other workers to check the tool radius of the meter, Measure the thickness or width of screw, Valve, Bearing ect..
【Easy to use】: The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need..
【Application】They measure accurately and have almost no errors, will help you quickly and easily check the radius of tools. Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..

Check Stock

ChgImposs Imper Screw Thread Pitch Gauge, 55 Degree Cutting Gauge Tool with Blades Range 4-62G

It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
Measuring Range: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
It is useful to check the tool angle when cutting threads on a metal lathe.
Check the angle on the thread cutting tool on the V-groove of the gauge.
It was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.

Check Stock

Lisle 20610 Inline Spark Tester

Gives a Visual Check of the Ignition System..
Quickly diagnose problems with all ignition systems. Connect the tool between the spark plug and the plug wire..
The tool is double-ended to offer a straight boot and a 90boot on one tool. With the engine running, the tool flashes a mirror image of ignition spark..

Check Stock

Lisle 95002 Fold-Up Creeper

Gives a Visual Check of the Ignition System..
Quickly diagnose problems with all ignition systems. Connect the tool between the spark plug and the plug wire..
The tool is double-ended to offer a straight boot and a 90boot on one tool. With the engine running, the tool flashes a mirror image of ignition spark..

Check Stock

Ducati Corse Windproof 3 Jacket - Size Medium

The Steering Stem Nut tool fits all Ducati's with a perforated top nut 748 749 900 916.
Using this tool is the only way to check the torque on the steering stem nut, or for its removal and assembly.
This Steering Stem Nut tool is equivalent to Ducati Part Numbers 887131058.
Steering Stem Top Upper Triple Tree Nut Special Tool Wrench for Ducati Model ST2, S4, ST4, S4R Streetfighter/ Multistrada/ Hypermotard.
Steering Stem Nut Removal Tool Fit Ducati 748 749 900 916 996 998 999 1098 1098S.

Check Stock

ChgImposs Metric Screw Pitch Gauge，60 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 0.25-6.0 Blades Range

It is 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
Measuring Range: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.
It is useful to check the tool angle when cutting threads on a metal lathe.
Check the angle on the thread cutting tool on the V-groove of the gauge.
All 24pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.

Check Stock