Top Cheap Micro Servos Reviews

TEAM LOSI RACING Servo Horn, 23T, Aluminum: 22, TLR1555

  • Lock on nylon control horns, 35mm * 15mm, designed with 4 holes, easy to install, sturdy in flight..
  • Pushrod, easy to bend to fit the angles that you need, work great with the micro servos and projects..
  • Application: Vehicles & Remote Control Airplane Aircraft Toys..
  • The Steel Push Rods Parts are used for connection between servo and servo horn..
  • Package Content: 10 x 1.2 x 200mm Pushrod + 10 * 35mm* 15mm Lock On Control Horn..
Check Stock

TEKNO RC LLC Aluminum Servo Horn, 25T Spline, M3 Clamp, 2 Hole Arm, TKR5253B

  • Length from Center to the outer hole: 19.6mm.
  • AL7075T6 hard aluminum construction for precision and durability..
  • Application: Fit for 1/16 1/24 rc vehicle, especially for AGFRC A20CLS, A26CHS, A23DLR, A27CHR servos..
  • Package Include: HPS06 Metal Micro Servo Horn x 1.
Check Stock

uxcell 1.5 x L300 mm Pushrod Connector Stainless Steel Rod Linkage,Z Shape,10pcs

  • PARAMETER - material:304 stainless steel.
  • FEATURE - easy to bend to fit the angles that you need, work great with the micro servos and projects..
  • COMPATIBLE WITH - RC boat,RC car, RC airplane, RC Helicopter,etc..
  • APPLICATION - fit for DIY model,such as vehicles & remote control airplane and aircraft..
  • PACKAGE CONTENT - 10pcs x Z Shape Stainless Steel Pushrod Connector..
Check Stock

Yahboom BBC Micro:bitV2.2 V2 V1.5 Coding Robot Car Kit STEM Education for Kids to Programmable DIY Toy for 12+ (Without Micro:bit)

  • ...screw and a few parts are designed with anti reverse socket, which makes installation simple and safe..
  • Multi-function expansion board with vertical slot structure as chassis of the vehicle, it is equipped with RGB lights, sensors, buzzers, various module interfaces and so on, besides, it can drive 2 DC motors and 3 servos simultaneously..
  • It can be controlled by IR remote control, and APP remote control by Android and iOS.It supports multiple functions: tracking, ultrasonic obstacle avoidance, following, light discoloration, singing, playing music, etc. Handle control (please order the handle separately: B07YYFDYW5, the handle also needs a separate micro:bit).
  • ★Note 1: Children without programming foundation need parental support ★ Note 2: You need to prepare micro: bit (v1 or v2）) for yourself. Without micro: bit, the robot can't work properly.If you need to order the micro: bit version, please search ASIN: B08F9WGK71. ★Note 3:The robot kit is not assembled,you need to install it yourself..
  • It supports JavaScript graphical programming, Python and other micro:bit programming methods.More than 30 kinds of experiment courses are provided.Please contact Yahboom, we will solve all the doubts about the product for you.If you have no experience, you c....
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

Bolsen 2 Set 2 DOF Short Pan and Tilt Servos Bracket Sensor Mount Kit for Compatible MG995 Retail

  • 2set,- Using two servos (MG995/MG996 or HS322,HS422,Hitec,Parallax,Futaba, etc 40×20×36mm servo).
  • Aluminium Matte Coat Pan and Tilt for horizontal surface, unassembled.
  • Servo bracket used in the shoulders and knees or other joint of humanoid robots,biped robots etc..
  • Can plant a camera or IR sensor for Robot, work with the 996 Servos.
  • This price does not contain steering gear and pitman arm! Only support bearing and screw! NOT include servos.
Check Stock

Blade BLH4100 120 S RTF +6-Channel Radio Sub-Micro Single Rotor RC Helicopter

  • Fully assembled, no building necessary. SAFE technology makes helicopter flight more fun.
  • Panic recovery mode can prevent a crash. Flybarless rotor mechanical simplicity.
  • Durable construction with carbon-fiber components. High-speed coreless main and tail rotor motors (installed).
  • Sub-micro linear long-throw cyclic servos (installed). E-flite 500mAh 1S 3.7V 25C Li-Po flight battery and charger (included).
  • Multi-function transmitter with Spektrum DSMX technology. Refer to the PDF attached below in Technical Specification for User Manual.
Check Stock

JWISLAND 6Pcs SG90 9g Micro Servos Motor Nylon Gear for RC Robot Helicopter Airplane Controls Car Boat

  • The plastic geared servos are consistent, relatively low noise and low current, and with less jitter issues, and last longer among the peers..
  • Operating speed: 0.1second/ 60degree ( 4.8V no load).
  • Lightweight and durable! Simple & inexpensive..
  • Application: Used for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Check Stock

uxcell M3x100mm Pushrod Connector Stainless Steel Rod Linkage,for RC Boat,Car,Airplane,Helicopter,10pcs

  • PARAMETER - material:304 stainless steel.
  • FEATURE - easy to bend to fit the angles that you need, work great with the micro servos and projects..
  • COMPATIBLE WITH - RC boat,RC car, RC airplane, RC Helicopter,etc..
  • APPLICATION - fit for DIY model,such as vehicles & remote control airplane and aircraft..
  • PACKAGE CONTENT - 10pcs x Round Stainless Steel Push rod..
Check Stock

XFLY-MODEL T-7A Red Hawk 64mm EDF Jet 4s RC Airplane PNP (Transmitter, Receiver or Battery not Included)…

  • -Powerful 4S-compatible outrunner motor with 12-blade 64mm fan delivers excellent top speed and vertical performance plus turbine-like sound.
  • -Excellent vertical performance and speed compared to other micro class EDF models..
  • -Fast and precise factory-installed digital servos with ball-link equipped linkages.
  • -Strong removable landing gears and steerable nose wheel..
  • - Magnetic top hatch with clear canopy, cockpit detail and pilot figure.
Check Stock

DIYmall RC Servo Tester 3CH Digital Multi Servo Tester ECS RC Consistency CCMP Master Speed Controller Checker

  • CCPM Servo Consistency Master/Servo tester, 2PCS:https://www(dot)amazon(dot)com/dp/B095HDN2T6?ref=myi_title_dp.
  • The device also can be used as a signal generator for electric speed controller (ESC).
  • With it, you can test your motor system without using a transmitter and receiver.
  • There are 3 modes to check servos or ESC,the ability to easily detect and configure the server's virtual spaces, jitter and median. It can connect 3 servos of the CCPM helicopters and select servos.
  • What you will get is: 1 X Servo tester. Any question, pls feel free to contact us.
Check Stock

G.T. Power Servo Tester Multi 3CH ECS Consistency Speed Controler Checker CCPM Master for RC Helicopter Car Boat

  • ★ Aluminum shell, durable and lightweight, easy to operate buttons. A new upgraded servo tester..
  • ★ 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode, you can manage the servo tester as your need..
  • ★ You can also connect 1-3 ESC to test and compare their reaction time respectively..
  • ★ GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos, multi-function..
  • ★ The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver..
Check Stock

uxcell 10pcs Adjustable Pushrod Connector Linkage Stopper 1.2mm x L450mm (17.7 Inch) Steel Z Push Rods Parts

  • Package Content: 10 x Steel Z Push Rods, 10 x Adjustable Pushrod Connector, 1 x Hex Wrench..
  • Push Rods Diameter: 1.2mm/0.047", Push Rods Length: 450mm/17.7".
  • Pushrod Connector: Diameter of the Hole:1.2mm, Fit Pushrods 0.8-1.2mm..
  • Pushrod, easy to bend to fit the angles that you need, compatible with the micro servos and projects..
  • The Steel Push Rods Parts are used for connection between servo and servo horn..
  • Metal Quick Adjuster comes with a hex wrench, easy to install..
Check Stock