Top Channel Line Out Converter Reviews

PAC SNI-1 RCA Ground Loop Signal Isolator Car Accessories

  • Line out converter for factory radios with 2 to 30-watts per channel.
  • Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.
  • Linear 20 to 20,000Hz output based on input signal.
  • Transformer isolated for optimal sound and performance.
Check Stock

SCOSCHE SLC4 Car Stereo Speaker 4-Channel Audio Lineout Converter/OEM Amplifier Adapter with Adjustable Level Controls

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer bass systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Line out converter for car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2 or 4-channel amplifiers to factory or aftermarket stereos..
  • BUY WITH CONFIDENCE: Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty..
Check Stock

NVX XFLOC2 80 watt 2-Channel Line Output Converter

  • 2-channel Premium adjustable line output converter.
  • 80w Maximum Input Total (40w Per Channel).
Check Stock

Pyle PLVHL70 2-Channel High-Level To Low-Level Converter with 12V Remote Turn-On

  • RCA FUNCTION HIGH TO LOW: The Converter allows you to get RCA line level outputs from your high-level output device. It also can convert the high-voltage signal output of the amplifier or speaker to the low-voltage signal, improve sound quality.
  • ADJUSTABLE ATTENUATION: Provide the level gain adjustment. Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience.
  • HIGH-QUALITY SOUND: No need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
  • EASY TO INSTALL: Provides amplifier remote turn-on output w/out removing car stereo. Just connect the wire between the speaker & the amplifier. Red input.
  • Connect to the amp line of the right channel. White input.
  • MAXIMUM INPUT POWER: Constructed from durable aluminum alloy. 45W per channel.
Check Stock

AudioControl LC6i Black 6 Channel Line Out Converter with Internal Summing

  • Six Speaker Level Inputs a" Can Accept 400 Watt Signals!.
  • AutoMode Turns 4-channel Input into 6-channel Output.
Check Stock

Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

  • World'S First Micro Surface Mount Line-Out Converter.
  • K-Grip Dual-Mold Connectors Offer Sure Grip.
Check Stock

NVX Powered Boost 2017-2022 Tesla Model 3 Sub Upgrade Kit with Amp, Sub, Box & Wiring Kit

  • Our BOOST enclosures were painstakingly designed by our in-house engineers to combat the lack of rich and deep bass commonly associated with the factory sound system. Each of our enclosures come equipped with NVX’s top of the line subwoofers, so you know your enclosure will bring the noise..
  • The NVX BOOST subwoofer enclosures work with what is already have in your car, especially with an aftermarket stereo. No need to purchase any other speakers, subwoofers, or other parts. You can buy either the BOOST package by itself or purchase the entire kit which includes an amplifier, amplifier wiring kit, and lineout converters..
  • Our BOOST series of subwoofers offer a simple and seamless installation fitting in your trunk. Each one of our BOOST subwoofers comes with a step-by-step guide on how to install it. You can also check out our website for more information about your BOOST Subwoofer.
  • What Comes with the Kit: NVX BE-TM3-VSW10S2 Tesla Model 3 Aftermarket Subwoofer and Box Upgrade / NVX VADM1 500W RMS Class D Monoblock Car/Marine/Powersports Amplifier with Bass Remote / NVX XKIT82 100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit / NVX XLCA2 2-Channel Line Out Converter.
Check Stock

NVX NDA501 980 Watt RMS N-Series Class D Bridgeable 5-Channel Amplifier CEA-2006 Compliant with Bass Remote Knob

  • Adjustable xBOOST corrects for bass roll-off.
Check Stock

NVX XLCA2 X-Series 2-Channel Line Out Converter Digital Bass Enhancer with xBOOST and Remote Level Control

  • Adjustable xBOOST corrects for bass roll-off.
  • Wired remote bass level control included.
Check Stock

NVX XCR1 Dash Mount Wired Remote Level Bass Control Knob for Select NVX and AudioControl Sound Processors

  • 2-Channel Premium Line-Out Converter with BassLift Technology.
  • Full-Range Main Output (Speaker) and Low-Pass Bass Output (Subwoofer).
  • “BassLift” Technology Restores/Compensates For Factory Bass Roll-Off.
  • Converts High-Level Signal Used To Play Factory Speakers Into Low-Level RCA Input.
  • Includes 34-Page Product Manual w/ Step-By-Step Installation Instructions.
Check Stock

RF Modulator RCA Coax Converter VHF UHF Demodulator Composite Adapter with Antenna & Full Band Channel Switch for Satellite Receiver CCD Camera Game Console AV Component Video to Local CATV Coaxial TV

  • RF Modulator for TV - CVBS RCA in coax rf out composite converter , not only for your PS2 , PS3 , PS4 , Nintendo Switch , reborn retro etc. game console and TV tuner , satellite Set-top / Cable Box , VCRs , Bule-ray / DVD players & camcorders etc. devices , but also for security camera / CCTV surveillance equipment to connect with monitor , projector or older TVs that don't have AV jacks..
  • AV to TV Converter - This DSB Agile TV Demodulator supports NTSC & PAL 2 different TV formats , VHF & UHF 2 operating frequencys up to 136 full band channels , PLL control and comes with the channel digital display & selectable switch.
  • No drivers, adapters needed, plug and play , easy to use.
  • You will get more benefits and convenience while saving a lot on your local CATV system..
  • RCA to Coaxial Adapter - The domestic modulator can convert line level composite video / analog stereo audio signals to RF ( coaxial ) for connection to old TVs that do not have line level AV jacks.
  • And the volume of audio & the brightness of video is adjustable..
  • AV to RF - One F type female coaxial input for connection of antenna , hd tv tuner , satellite receivers, set-top / cable box , and a separate RF coax output for connection of TV or RF splitter to extend your digital / analo....
Check Stock

192KHz Digital to Analog Audio Converter Adapter,DAC Digital Optical Toslink to Analog 3.5mm Male Stereo Audio Cable 3.3FT with Optical Cable for DVD PS4 TV Home Cinema

  • NOTE: (the package excluding 5V DC 1A power supply, Because everyone has a bunch of them laying around the house so it saves you the extra cost of another one).This Digital to Analog Audio Converter is Designed for Either Home or Professional Audio Switching ，Easy to Install and Simple to Operate.
  • Can be Used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc，every family need it toEnjoy a beautiful lifel.
  • It Converts Toslink Digital Audio Signals to Analog Audio This Converter Has Many Features That Enable It to Perform in a Superior Manner. stereo shocking sound quality ,high fidelity lossless sound quality reproduce CD-level sound quality,conquer your ears ,CD-level sound quality , signal stable transmission,listening to songs without delay , no noice ,no current ,the sound is not distorted .connection : Plug and play easy to connect,one-line conntection easy audio conversion ..
  • Toslink Digital Audio Signals to Analog Audio Supports Sampling Rate at 32KHZ, 44.1Khz, 48khz and 96khz ,192KHz . 24-bit S/PDIF Incoming bit Stream on it. This optical digital to analog converter is incompatible with 5.1 Channel Signal such as Dolby AC3, please set the audio output to PCM or LPCM before using this adapter..
Check Stock

Optical to Coaxial OR Coax to Optical Digital Audio Converter Bi-Directional Digital SPDIF Toslink Optical to Coaxial Digital Audio Signal Adapter Support 192 KHZ Sampling Rate Noise-Free Transmission

  • Bi-Directional Digital Audio Converter: Optical to Coaxial OR Coax to Optical Digital Audio Converter.
  • Audio Converter Plug and play, no need any software and driver..
  • Digital Audio Converter Support multi-channel surround sound, uncompressed PCM audio and compressed 5.1 audio including Dolby Digital, DTS to audio processor or A/V receiver with capacity of decoding audio source..
  • Digital Audio Converter Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port..
  • Package Contents: Bi-Directional Digital Audio Converter x1, Toslink Cable x1,Coaxial Cable x1, USB Power Cable x1,User Manual x1, Any issues, please feel free to contact us.
Check Stock