Top Centering Square Reviews

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI

  • This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes setup is quick and easy by.
  • Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck.
  • Two 4-Inch wrenches are included for final tightening.
Check Stock

KAKA AC-60 Angle Clamp, Light-Weight, Easy Operation Angle Clamp Vice, Solid Construction, 90 Degree Welding Angle Clamp

  • Light weight and easy operation angle clamp vice.
Check Stock

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock

Taytools 469003 Deluxe Pen Blank Centering Drill Press Vise, Jaws open to 2-3/8 Inches, Will Drill Center of Blanks Up to 1-7/8 Inch Square

  • This self-centering pen blank vise allows you to firmly secure pen blanks and drill the exact center every time.
  • Jaws open to a full 2-3/8” and will drill the middle of square blanks on the diagonal up to 1-7/8” square, making it useful for more than just pen blanks.
  • The jaws on the drilling vice open and close together in a synchronized fashion to insure drilling in the precise center of blanks.
  • The 1/2” thick anodized aluminum jaws are attached to hardwood base.
  • The base include a groove for a sacrificial blank to protect the base when drilling all the way through blanks.
Check Stock

Passive Paradise Card Thickness Point Gauge Tool - Trading Card Thickness Measuring Guide

  • BUNDLE INCLUDES: Thickness point gauge, card grading centering tool, 50 penny sleeves and 30x magnifying loupe..
  • ACCURATE: No more guessing patch card, top loader or magnetic case thickness! Our thickness gauge will help you quickly and accurately determine the correct size top loader or magnetic case you will need for patch, auto and standard trading cards..
  • CONVENIENT: Perfectly sized to fit in your pocket for on the go measuring with clearly labeled sizing blocks for easy thickness readings..
  • USER FRIENDLY: Our centering tool is simple and easy to use. It comes with how to instructions and a centering percentages guide for determining the centering grade..
  • HIGH QUALITY: Made to last with high quality, semi-rigid PVC to reduce the risk of smearing, stains, creasing and bending..
  • RETAIN VALUE: Have peace of mind sending in your baseball, football, basketball, hockey and soccer trading cards that you have checked BEFORE getting hit with grading fees by PSA, BGS, SGC, HGA or GMA. Grade your cards centering and also examine corners and edges with this card grading set. Our bundle will pay for itself many times over and save you money in the long run!.
Check Stock

Hi-Spec 1/4” Hex Shank Screw Driver Bits & Drills Set S2 Steel Bits & Drill Driver Power Tool Accessories for DIY Repairs Installing Fixtures & Fittings Screwing & Fastening

  • SCREW BIT ESSENTIALS: For any electric drill driver, get the screwdriver bits needed for a wide range of DIY screwing and fastening tasks. Just insert....
  • 45 PIECE BIT ACCESSORIES: There’s Torx, Phillips, Pozidriv, Square, Hex, and Slot/Flathead making the most popular types of screw driver bits needed....
  • WITH DRILL BITS: The carbon steel Brad point wood drill bits, for wood and plastics, have piercing or centering tips for accurate drilling starts and....
  • S2 HARDENED STEEL BITS: The driver bits are sand-blasted and heat treated from S2 Shock-resisting steel alloy. The addition of silicon increases....
  • IN THE BOX: 30pc 25mm Bits: Philips PH1, 1, 2, 2, 3, 3.
  • Slotted SL1/8, 5/32, 3/16, 7/32, 1/4, 1/4".
Check Stock

Phone Cable Locator, Wire Tester Network Phone Cable Detector Locator Meter Tracking Device Electric Meters Tester Phone Cable Detector

  • Excellent Material: This self-centering positioning fixture is made of high-quality materials, and at the same time, it is not easily damaged and can be used for a long time..
  • Diversified Sizes: This self-centering positioning clamp has 6mm, 8mm, 10mm hollow nuts, which are easy to replace and meet various needs of users..
  • Adapt to The Center of The Board: This self-centering positioning clamp can adapt to the center of the board. After punching, a positioning pin is installed to connect the two boards..
  • High Accuracy: This self-centering positioning clamp has a 90-degree angle and can be used for positioning drilling of wooden rods and 90-degree wooden blocks. It can accurately fix the drilling, and you can use it with peace of mind..
  • Perfect Tool Kit: This self-centering positioning clip is a perfect tool kit for furniture factories and woodworking enthusiasts, as long as you need it, it can be your good helper..
Check Stock

Legends Card Grading Centering Tool with Cleaning Cloth Kit Material for PSA - BGS - Graded Card Submissions Card Center Tool

  • PERFECT CENTERING IS A MUST! - Save money on card grading fees with our card grading tool. You can easily determine if your card meets the centering requirements for PSA or BGS submission. Works with any standard sports card or TCG card games including Pokemon, MTG, or Digimon..
  • REMOVE PROTECTIVE COVER ON PLASTIC BEFORE USE! - Our tool ships with protective covering on both sides to ensure that your tool is not scratched when you receive it..
  • BEST MATERIAL ON THE MARKET! - Our tool is made with a high quality crystal clear acrylic material that won't warp, smear, bend, or crease..
  • EASY TO USE! - Our centering guide is easy to use, simply place over the card you wish to check, take the measurements, and reference the centering tool percentages guide. With our card grading tool you can check the centering from left to right and top to bottom..
  • INCLUDES BONUS CLEANING CLOTH! - You can wipe your cards down before using the tool to prevent any damage and throw them right in a sleeve for grading!.
Check Stock

Bosch RA1151 Router Subbase Centering Pin and Cone

  • For precise centering of template guides and attached subbases.
  • For Bosch routers that have the Precision Centering Design.
Check Stock

Lug Ripper Tool Kit

  • Removes the most difficult locking bolts quickly, safely and without damage to wheels or rim.
  • Great for all vehicles with lost or damaged locking lug bolt keys.
  • Operation time is approximately 8 minutes per wheel.
  • Includes: (4) nylon internal centering guides, (3) metal external centering guides, (1) metal centering guide for free turning lugs, (2) special ultra hard drills, (4) extractors, (1) impact extractor holder, and (1) impact extractor remover.
Check Stock

Lug Ripper II - Lug Nut Remover

  • Removes the most difficult locking bolts quickly, safely and without damage to wheels or rim.
  • Great for all vehicles with lost or damaged locking lug bolt keys.
  • Operation time is approximately 8 minutes per wheel.
  • Includes: (4) nylon internal centering guides, (3) metal external centering guides, (1) metal centering guide for free turning lugs, (2) special ultra hard drills, (4) extractors, (1) impact extractor holder, and (1) impact extractor remover.
Check Stock

Toledo Pipe 44165 Rear Centering Assembly D970 fits RIDGID 300 Pipe Threader

  • Toledo Pipe Tools is proud to give you alternative high quality replacement parts..
  • A replacement rear centering assembly fits RIDGID 300 and RIDGID 300 Compact.
  • Replaces Rear Centering Assembly on RIDGID 300 Power Drive 41855 75075.
  • Replaces Rear Centering Assembly on RIDGID 300 Compact 66947.
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ...ol life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock