Top Center Scriber Marking Tool Reviews

Hiboom 8 Pack Mechanical Carpenter Pencils Set with Center Punch, Carbide Scribe Tool, Solid Pencil Marker Tool with Built-in Sharpener, 21 Refills Red Yellow Gray, Great for Woodworking Architect

  • This center metal punch great for wood, plastic, metal, glass, and leather.
  • Metal carbide scribe: this carpenter scribe tool has a reliable tungsten carbide tip and knurled aluminum body can offer the maximum control force and comfort.
  • The metal scribe came with a protective vinyl cap over the scriber tip, to help prevent the tip from damaging anything while it is being stored.
  • Ideal for marking measurements and making desired markings.
  • Good combination: you will get 3 pcs solid carpenter pencil with 21 pcs marker refills, 1 piece carbide scriber tool and 1 piece automatic center punch tool.
  • Multiple tools can meet your different woodworking marking needs.
  • Widely applied: this carpenter tool kit can be applied for construction, metal trim, automotive, glass window breaker, works well on wood, plastic, steel and wall.
Check Stock

74 pcs handheld dowel jig kit 2 in 1 Center Scriber Line doweling hole jig with Wood Dowels Pins Drill Bits for Woodworking Drilling and Marking

  • 2 in1 multi-function: Self Centering Dowel Jig for Drilling holes and Center Scriber Systerm for Marking (pin the pencil to a diameter of about 6mm) . Material : ABS engineering plastics and high hardness metal..
  • Useful Woodworking dowel jig kits : Package contain 1 pcs self centering dowel jig , 3 pcs drilling guides, 3pc wood drill bits,3 size *20 pcs wooden dowels, and 3pc dowel centering pins (Size :6mm(1/4”),8mm(5/16”)10mm(3/8”) , 1 pcs small wrench woodworking tool accessory kits ..
  • Adjustable to fit 16mm-106 mm wooden board : Self center doweling jig is movable with screws to fit different thickness of wooden board . It is widely used for precise positioning when punching holes on the side of wood boards, with good verticality and higher punching accuracy..
  • Precise Measurement -This woodworking centering tool can quickly and accurately mark center lines on wood board, scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.".
  • Easy and Quickly: Positioning ensure accurate alignment when drilling, can quickly and accur....
Check Stock

Center Scriber Line Scriber Woodworking Marking Offset Marking Tool Marking Center Finder Tool Wood Scribe Marking Gauge Fits Standard Wooden Pencils (2, Red)

  • Multi-function scriber: can mark the center of the plate with a thickness of 64 mm, move the scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.
  • Magnetic bottom: precision marking tool can be attached to the iron surface, and you can put the pencil in the foot hole, convenient to use and storage.
  • Good material: line scriber is made of ABS plastic, harmless to your body, durable and easy to use, please feel free to use it.
  • Measurement: 100 x 60 x 50 mm/ 3.9 x 2.4 x 2.0 inches, this woodworking tool can quickly and accurately mark center lines on wood board up to 64 mm/ 2.5 inch, the diameter of the foot hole is about 7.2 mm/ 0.28 inch.
  • Wide application: suitable for plate grooving, pin joints, assembly work, making reference lines for drilling holes, marking out mortises and rabbets, etc..
Check Stock

Wheel Marking Gauge,Adjustable Stainless Steel Woodworking Marking Gauge for Woodworking,Woodworking Marking Scriber Kit Double-Shaft

  • 【SUITABLE FOR WOODWORKING】Single-shaft scriber is with laser scale supports fine adjustment distance for accurate scribing..
  • 【TIGHTENING ADJUSTMENT】Carpenter scriber comes with tightening adjustment, such marking tool uses the withdrawal tool to adjust the tightness and....
  • 【ADJUSTABLE WHEEL MARKING GAUGE】 Marking Tool Supports single-shaft and double-shaft adjustment, it can meet different needs..
  • 【STAINLESS STEEL WOODWORKING MARKING GAUGE&CORROSION RESISTANCE】Stainless steel slide bar is rust-and-oil-proof, which can keep longer life for....
  • 【QUALITY ASSURANCE】We have strict control over the quality of each product to ensure that every product you buy is certified. If you have other....
Check Stock

DGQ Center Scriber Line Scriber 2 Packs Center Offset Scriber Marking Tool Woodworking Center Finder Tool Gray Wood Scribe Marking Gauge

  • High Quality ABS Material - DGQ center offset scriber is made of high quality ABS plastic material, high strength and durable. Allows smooth gliding....
  • Multi - Function Woodwork Measuring Tool - DGQ wood scribe marking gauge can mark the center of the plate with a thickness of 64 mm, move the scribe....
  • Magnetic Bottom - Very convenience to use, this center finder tool can be attached to the iron surface, and you can put the pencil in the foot hole..
  • Value Pack with 2PCS Center Scribers & 2PCS Pencils - It will come with 2pcs DGQ center scribers in size 100 x 60 x 50 mm/ 3.9 x 2.4 x 2.0 inches and....
  • Widely Use - DGQ woodworking tool can quickly and accurately mark center lines on wood board up to 64 mm/ 2.5 inch, great for plate grooving, pin....
Check Stock

Center Scriber Marking Tool Center Finder Woodworking Centering Tool Center Scribe for Any Board Up to 2 1/2” Wide TSAIYOGA-2PCS Fits #2 & Mechanical Pencils

  • Handy: Any board thickness is up to 2 1/2”  wide. Center scriber is suitable for Mechanical and #2 pencils..
  • Accurate: Center scribe draws the centerline accurately, also draw 8 different sizes edge  1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Magnet: The scribe tool is equipped with a magnetic block that can be adsorbed on the metal surface or nails..
  • Material: The centering tool is made of environmentally-friendly ABS plastic and is durable..
  • Applicability: The woodworking center finder is suitable for plate slotting, cutting plate, pin connection, assembly work, marking out mortises and....
Check Stock

BCDshop Center Finder Woodworking Precision Marking Gauge Scribers Rockler Centre Offset Marking Tool Fits Standard Wooden Pencils Woodwork Measuring Tool Blue

  • Used to determine the exact position of the center of the board during board cutting, pin joints, assembly, etc..
  • The center scriber is made of ABS plastic and is environmentally friendly and durable..
  • The multi-function scribe can mark the center of the sheet with a thickness of 64mm..
  • You can move the scribe to draw a 1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Marking Center Finder, Woodworking Precision Marking Gauge Scribers,Woodworking Center Scribe Marking Center Gauge, Woodworking Drilling Positioner....
Check Stock

Homaisson Mortise Gauge, Woodworking Scriber Marking Tool 6.4in Ebony Mortise Square Gauge, Brass Screw Type Sliding Mark Scraper, Adjustable Head Meter Carpentry Marker

  • ... is designed with 1 nail on one side and 2 nails on the other side for drawing either single or double lines, suitable for marking, scribing, laying out on all kinds of joinery or other woodwork..
  • 2. Hard Ebony & Wear-proof Brass Materials: The main body of the marking scriber is made of ebony with high hardness, and the guide rail, backing, and screw are all inlaid with pure copper bars, making the scriber durable against wear, rust, and corrosion..
  • 3. Wide Adjustment Range of Nail Space: The distance between 2 nails can be adjusted by turning the screw knob on the top, which is easy to operate, and the adjustment range of 0.2”-4” is wide enough to meet your needs for different wood marking requirements..
  • 4. Smooth Brass Slider: The brass adjustment sliding bar slides smoothly, with a small handle on the end that adopts ergonomic design for easy pulling of the slider. It is firmly fixed on the guide rail by tightening the screw, so displacement will not happen when in use..
  • 5. Professional Woodworking Tool: The woodworking scriber is 6.4 inches in total length, with fine w....
Check Stock

Center Line Scriber Woodworking Offset Marking Tool with Pencils for Dowel Position Locating/Open Hole/Cutting 40-100MM Width Wood Centerline Finder

  • MARKING CENTER FINDER: Self-adaptive Marking Centerline Tool, whether cylindrical or cubic wood or just, can be easily marked..
  • FAST AND EFFICIENT: Woodworking centerline marking kit, directly insert the wood, you can mark, only need to apply light pressure to the pen, and then....
  • USE WIDTH: The clamping position is 40-100mm, and the width of the linear material is within this range, all can be used..
  • ADAPTIVE BAFFLE: With two guide baffles, when the width of the wood is within the use width range, it will be clamped correspondingly to make sure....
  • DURABLE LINE SCRIBER: Made of stainless steel, it will not be damaged after long-term use, and it can be used in different environments..
Check Stock

Carpenter Pencil Set Carpenter Scriber Marking Kit Including 3 Pieces Carpenter Pencils with Replaceable Marker Refills Gold Carbide Scriber Tool Red Automatic Center Hole Punch for Construction Tools

  • Packing include: you will get 3 pieces of carpenter pencils in 2 styles, including 1 piece of red carpenter pencils with sharpeners, 1 black and 1 blue carpenter drafting pencils, 1 piece of gold carbide scriber tool and 1 piece of automatic center hole punch tool, and they come with 2 sets of marker refills, respectively 1 set of red and black combinations and 1 set of black and gold combinations, sufficient quantity to meet your daily uses and replacements needs.
  • Carpenter pencils: these 3 carpenter pencils are equipped with enough refills, which is convenient for you to use in different places, the design of the refill extends the use time of these carpenter pencils, strong and hard to be broken, suitable for a variety of surfaces, and the pen clip design can be easily attached to the pocket, easy to use and not easy to lose.
  • Carbide scriber tool: the gold carbide scriber tool is designed with handheld pen style with convenient pocket clip, and the scribe tool is made of alloy material, which is easy to carve on hard material such as metal, tile, glass, ceramics, wood and more.
  • And the size of the carbide tip scriber is approx. 5.7 x 0.3 inches/ 14.5 x 0.8 cm, which is suitable for you to carry anywhere and store.
Check Stock

TICOFTECH 12-Inch Combination Square Inch/Metric Metal Combo Square with Stainless Steel Blade Accurate Woodworking Measure Square with Carpenter Pencils……

  • [Optimized function]: Scale laser calibration, clear, accurate and wear resistant. Durable cast zinc body, rust proof stainless steel blade.
  • [Accurate Measurement]: The exclusive carpenter square allows you to quickly and accurately ensure square and level marking and measuring in a vast array of applications.
  • [Multi-tool]: TICOFTECH set can be used as a square, depth gauge, scriber, and a level[Multi-tool]: TICOFTECH set can be used as a square, depth gauge, scriber, and a level.
  • [Applications]: Great for marking 45 and 90 degree angles, and can also function as a handy gauge for transferring precision angles and other measurements.
  • essential for use in your rafter, deck, stair and roofing projects, and in other general carpentry operations.
  • [GUARANTEE]: In the rare occasion you are not completely satisfied with your purchase, TICOFTECH will refund or replace your order through our 100% Money Back Guarantee.
Check Stock

ViaGasaFamido Wheel Marking Gauge, Adjustable High Accuracy Carpenter Marking Scriber Hand Measuring Tool with Removal Tool for Woodworking Accessory(Double-Shaft)

  • ▲Adjustable Design: With tightening adjustment, such marking tool uses the withdrawal tool to adjust the tightness and replace the cutter head..
  • ▲Premium Material: Stainless steel slide bar is rust-and-oil-proof, which can keep longer life for durability..
  • ▲Scale On Single-Shaft Scriber: Single-shaft scriber is with scale supports fine adjustment distance for accurate scribing..
  • ▲Strong Corrosion Resistance: Duplex stainless steel is with strong corrosion resistance, which makes such tool get higher performance..
  • ▲Single and Dual Shaft Optional: Supporting single-shaft and double-shaft adjustment, it can meet different needs..
Check Stock

Solid Carpenter Pencil for Construction with Refills and Retractable Utility Knife, Carbide Scriber Tool for Glass Ceramics Hardened Steel Woodworking Architect (86 Pieces)

  • Package includes: you will receive 8 pieces of solid carpenter pencils, 2 piece of carbide scriber, and 8 packs of pencil refills in the colors of black, yellow and red, and 4 pieces of utility knives, which can be reusable to meet your woodworking marking needs.
  • Built-in pencil sharpener: the red carpenter pencil is designed with a pencil sharpener on the top for convenient use at any time and anywhere, sharpening the refill to the accuracy you need, which can provide efficiency for you to work.
  • Useful carbide scriber: the scriber adopts a tungsten carbide tip and can mark hard materials such as glass, ceramics, hardened steel and stainless steel, which is an important processing tool and can draw accurate lines.
  • Convenient pocket clip design: the practical pocket clip design allows you easily access to solid carpenter pencil accessories without taking the time to find them.
  • The non-slip handle can provide you with a comfortable dripping in drawing and marking.
  • Quality material: carpenter pencil is strong, accurate and practical.
  • The pencil is a 2B refill, which is grease and traceable, offering smooth drawing and writing for architecture, bricklaying and other occasions.
Check Stock