Top Ccfl Tft Backlight Reviews

iLooker 27E 27 inch LCD LED Video Monitor Hood Sunshade Sunhood for Dell HP Viewsonic Philips Samsung LG EIZO NEC ASUS ACER BENQ AOC Lenovo and Fits Monitor Frame Width 635-655mm

  • GB-R LED backlight consumes 37% less power than a comparable CCFL backlight.
  • Superior screen performance (1000:1 contrast ratio, 2560x1440 native resolution, 340cd/m2 brightness).
  • 14-bit 3D internal programmable lookup tables (LUTs) for calibration.
  • Picture in Picture and Picture by Picture modes increase productivity by displaying two sources simultaneously.
Check Stock

Toshiba Satellite C655D-S5202 Laptop LCD Screen 15.6 WXGA HD LED Compatible Replacement

  • Brand New. Same Day Shipping for Orders Placed and confirmed Before 5PM EST - No Restocking Fees..
  • Screen Replacement Resolution: WXGA 1366X768.
  • This LCD is compatible with many laptop models as well as many LCD Screen Replacements. This 15.6" LCD is CCFL and use an inverter. This A Internal....
Check Stock

Hp Chromebook 14 G4 Replacement Laptop LCD Screen 14.0\ WXGA HD LED DIODE (Substitute Replacement LCD Screen Only. Not a Laptop) (830015-001)

  • Brand New. Same Day Shipping for Orders Placed and confirmed Before 5PM EST - No Restocking Fees..
  • Screen Replacement Resolution: WXGA 1366X768.
  • This LCD is compatible with many laptop models as well as many LCD Screen Replacements. This 15.6" LCD is CCFL and use an inverter. This A Internal Replacement Screen Replacement Only..
Check Stock

Jambo 6000K Super Bright White Angel Eye Halo Ring Light Lamp CCFL For BMW E46 3-Serie

  • Angel Eyes fit for: BMW E46 4D without Projector headlight BMW E46 Coupe / Convertible 1999-2003 (with Non-Projector Low Beam Headlight ) BMW E46 Sedan 1995-2005 (with Non-Projector Low Beam Headlight ).
  • FOR BMW Angel Eye Halo Light CCFL E46 E46 3 Series Super Blue Non-Projector 12V.
  • Color : White Voltage : 12V Lens : CCFL Easy to install, Aluminum backing, shock proof, heat resistant..
  • 2pcs of BMW CCFL Angel Eyes / Halo Ring Super Blue (Outer Diameter : 131 MM : High Beam) 2pcs of BMW CCFL Angel Eyes / Halo Ring Super Blue (Outer Diameter : 146 MM : Low Beam).
Check Stock

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

  • 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
  • 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
  • with a capacitive touch panel. Supports 5-point touch..
  • 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
  • 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
  • 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
Check Stock

Mini CCFL Tester LCD TV Monitor Laptop Screen Repair Backlight Lamp Test MAX 400mm LM-12301

  • Wonderful design for testing all types ccfl lamps in monitor ,TV ,Laptop.
Check Stock

VSDISPLAY HD-MI Audio LCD Controller Board Work for 14.1 15.4 inch 1280x800 b154ew01 b154ew02 lp154w01 ltn154at07 ltn154x3-l01 lp154wx4 LTN140W2-L01 LVDS 30 Pin Interface 1CCFL Backlight LCD Screen

  • Not list all of compatible panel.it must to confirm your screen is a 14.1" or 15.4" resolution 1280x800, the backlight type is 1CCFL, and the LVDS....
  • Compatible with : LTN141AT01 LTN141AT02 LTN141AT03 LTN141AT07 LTN141AT10 LTN141AT13 LTN141AT14 LP141WX3 LT141WX1 B141EW01 B141EW02 B141EW03 B141EW04....
  • Recommend :Power Adapter Power Adapter 12Vdc more than 2A 5.5mmx2.1mm Connector. Or go to "VSDISPLAY "store to get "VSDISPLAY Power Adapter, AC....
  • Help to notice there is no power adapter in the packing list . Follow the user manuel and the picture on this page to connect and use the board..
  • Packing list : 1× HDMI LCD Controller Board VS-TY2660H-V1 1× 1CCFL Inverter Board 1× 30Pin Signal Cable 1× Keyboard With Cable 1× Remote....
Check Stock

HiLetgo 2.4\ ILI9341 240x320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560

  • 2.4" diagonal LCD TFT Touch Panel display.
  • Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control.
  • Colorful, 18-bit 262,000 different shades.
  • 8 bit digital interface, plus 4 control lines.
Check Stock

Heart Horse CCFL Inverter For Spyder Lights for B-M-W Ma-zda Le-xus Infi-niti Angel Eye Ring 4-Outputs 12V High Power Female Ballast Replacement 1 For 2 Lamps,Up to 300mm

  • ➤Burning protection - The inverter is sealed to prevent short circuit. replace your old or broken aftermarket CCFL inverter with these great quality....
  • ➤Great performance - waterproof and high heat resistance. High brightness and low consumption, over 15,000 hours of life..
  • ➤Fit accessories - compatible with the aftermarket B-M-W Ma-zda Le-xus Infi-niti CCFL Angel Eye Ring. Each inverter is connected to 2 halos..
  • ➤Best alternative - CCFL light output plug covered with heat-shrink tube. If your CCFL Angel Eye Ring Inverter is burned, please replace it..
  • ➤Easy to install - Open cable allows easy connection to any 12V DC power supply in the car..
Check Stock

Extech 380193 Passive Component LCR Meter

  • For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
  • Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
  • Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
  • After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
  • One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..
Check Stock

HDMI Audio Input LCD Controller Board for 15.6 LP156WH1 LTN156AT01 N156B3 B156XW01 1366X768 30Pins LCD Screen

  • COMPATIBLE SCREEN(Only Some Models Are Listed): LP156WH1 LTN156AT01 N156B3 B156XW01.
  • Compatible Work With 15.6" 1366x768 1CCFL Backlight 30Pin LCD Screen.
  • Operation Voltage 9~16V DC,12V 3A DC power adapter required and sold separately.
  • This is a DIY universal board kit that can be configure to match different models of LCD panel, Please provide your LCD Model with suffix before....
  • If you have any question,Please contact me, I will reply within 12 hour.
Check Stock

HDMI VGA 2AV Auido Input LCD Controller Board for 15.6 LP156WH1 LTN156AT01 N156B3 B156XW01 1366X768 30Pins LCD Screen

  • Video Input: HDMI VGA AV1 AV2 Audio Input: HDM Audio Output: Speaker (4Pin PH2.0 connector) Board Size: 91mm x 66mm x 12mm.
  • Compatible Work With 15.6" 1366x768 1CCFL Backlight 30Pin LCD Screen.
  • If the model of the screen is not compatible with the control board, the control board cannot operate normally. If you have any questions about the....
Check Stock

Sixty61 Headlight Halos for Suzuki GSXR 600 750 2004-2005 CCFL Angel Eyes light ring kit, GSXR600, GSXR750 (Red)

  • HALO LIGHTS FITMENT: Suzuki GSXR 600 750, 2004 2005, GSXR600, GSXR750.
  • INCLUDES: A switch that can be mounted almost anywhere so that CCFL Halo can be turned on or off at any time, Installation Instruction and diagram, Four CCFL Halo rings in the color of your choice, Two transformer boxes (The inverter box for CCFL halos is 12V DC).
  • INSTALLATION: This installation requires you to heat and open the headlight lamps in order to install this product. You can either use a oven or heat gun to open headlight lamp..
  • WARRANTY: One year manufacturer's warranty. This product requires a silicone adhesive type application, therefore there is no return once it is installed..
  • NOTE: This sale is for halo lights rings only, and the necessary hardware to installed it. This sale is Not for the whole headlight assembly..
Check Stock