Top Catv Distribution Equipment Reviews

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..

Check Stock

Leviton 47693-16P 1x16 Premium Amplified CATV Module & 47615-NYL Push-Lock Pins for Structured Media Centers, Bag Of 20

Push-lock pins for structured media centers.

Check Stock

Channel Master Ultra Mini 2 TV Antenna Amplifier, TV Antenna Signal Booster with 2 Outputs for Connecting Antenna or Cable TV to Multiple Televisions (CM-3412),Silver

Two Amplified Output Ports (Gain: 11.5 dB).
Works with all TV Antennas & CATV Installations (Not Compatible with Satellite).
Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels.
Miniature Size for Space-Saving Installations.
Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate.
Same Performance required by the major cable television companies.

Check Stock

LC/UPC Fiber Optic Attenuator 5dB, in-Line Attenuator, Male/Female, Single-mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB, 10 Pack

Connector/Connection Polish: LC/UPC Male to LC/UPC Female, 10 Pack.
Low Insert-loss & High Return-loss: Optical fibers are connected by adapters through internal open sleeves. Provide LC adapters to ensure the connection between fiber patch cable..
Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
Feature: Light weight, small volume, high accuracy, good stability and convenient operation..

Check Stock

AUGOCOM RY S110 CATV Cable TV Handle Signal Level Meter DB Best Tester 47-870MHz

【Multi-Function TV Signal Meter】RY S110 CATV Cable TV Handle Signal Level Meter is an instrument used for the construction and maintenance of analog TV / digital TV, and the measurement of TV signal level and power level. It is widely applied in the routine maintenance of the CATV system.
slope measurement,voltage measurement,measurement of C/N ratio..
【How to switch the meters Channel to US Channel?】Enter VOLT and then press ./Z button, and the right corner please switch to 2ch, then you entered US channel..
【Customized Barrel】We have received customer's feebdack before that the barrel come with original package is not compatible, so we have customize the barrel. And now purchase our S110 TV Signal Meter can get the customized barrel for free..
【Wide Test Range】U.S. Standard Channel USA STD-CATV/U.S. digital standard channels USA STD-CATV ,Range of frequency: S110 47MHz ~ 870MHz ..
【Worth to Own】S110 employs high brightness back-light operating modes, with clear LCD screens, dual-channel measurement display, so it is convenient and pragmatic.
besides, numeric keypad input allows it easy to operate..

Check Stock

Square D - PK15GTACP 15 Terminal Ground Bar Kit

Contact material: copper Production process: cold pressing Insulator material: plastic..
Total Size: 95 x 12 x 21mm / 3.74in x 0.5in x 0.8in(L*W*H), Screw Size: M4..
Mounting Hole Center Distance: 82mm / 3.23in..
Widely used in power distribution cabinets, distribution boxes, mechanical equipment factories, electrical equipment factories, etc..

Check Stock

Square D - PK12GTACP 12 Terminal Ground Bar Kit,Metallic

Contact material: copper Production process: cold pressing Insulator material: plastic..
Overall length: 70mm/ 2.76". Hole Diameter: 5mm/0.2". Screw Size: M4. Copper bar height: 9mm/0.35in..
Mounting Hole Center Distance: 57mm/2.4".
Widely used in power distribution cabinets, distribution boxes, mechanical equipment factories, electrical equipment factories, etc..

Check Stock

My MIRONEY Terminal Bus Bar Terminal Block Brass Wire Screw Terminal Pack of 5

⭐Package Includes: 5 x Terminal Bus Bar..
⭐Mounting Hole Center Distance: 69mm/2.7"..
⭐Total Size: 83 x 12 x 21mm/3.3" x 0.5" x 0.8"(L*W*H)..
⭐Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc..

Check Stock

RF Modulator VHF Demodulator Converter HDMI Modulator RF Converter HD Input A/V Output RF Output with Transmission Line for CATV System

Professional-grade audio/video RF modulator for broadband A/V distribution for all NTSC TV system setup. Converts standard composite RCA video/audio inputs to a user-defined CATV/UHF channel. Support RF output in cable channels from CH2 to CH138 or UHF/VHF channel from CH14 to CH83. Programmable channel output flexibility in altering TV channel line-ups and instant replacement of existing TV channels..
Designed for North America regions using NTSC TV broadcast standard. Transmitting audio/video over coax cable offers greater transmission range and much lower cost than the typical balun or Cat5 extender solution. Supports all audio/video sources such as satellite receivers, camcorder or other analog video devices..
Must-have A/V adapter for combining both RCA video/audio from device into RF type for long range video/audio distribution. Cost saving with source device sharing. All TVs connected through the same coax cable can share the same A/V device. Video and audio signals from CCTV surveillance camera can be presented on your TV channels..
Supports manual output gain control. Manual gain level adjustment available from 0 to 20 dB. Powerful 100db signal output sufficient for long cable runs up to 1200 meters. Multiple units cascaded together to dis....

Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
Blue LED in IR Receiver bulb verifies the signal transmission.
Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
Route the infrared remote control extender cable out of sight with a wall mounted TV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
Simple installation of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.

Check Stock

RLECS 2pcs Terminal Bus Bar Terminal Block Brass Wire Screw Terminal Grounding Strip Bus Bar Block

Contact material: copper Production process: cold pressing Insulator material: plastic..
Total Size: 83 x 12 x 21mm/3.3" x 0.5" x 0.8"(L*W*H). Mounting Hole Diameter:4mm/0.16"..
Mounting Hole Center Distance:69mm/2.7"..
Widely used in power distribution cabinets, distribution boxes, mechanical equipment factories, electrical equipment factories, etc..

Check Stock

APC Surge Protector with Phone, Network Ethernet and Coaxial Protection, P11VNT3, 3020 Joules, 11 Outlet Surge Protector Power Strip Black

11 total power surge protector outlets with sliding safety shutters, 6 outlets are block spaced for larger adapters.
Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector).
8 feet cord with 180 degree rotation and right angle plug.
Lifetime warranty and 100,000 dollars equipment protection policy provides peace of mind.

Check Stock

Jonard Tools CM-8 Coax Cable Mapper 8 Way and Toner Kit For Testing Cables Up to 4,000 Long

CABLE MAPPING: Finds and identifies up to 8 COAX cables in main cable boxes using color-coded cable identifiers and tone generation.
VERSATILE USE: Perfect for testing cables for CATV, network installations, satellite installations, audio-video equipment, CCTV, and security & alarm....
BUILT-IN TONE GENERATOR: Easily identifies opens and shorts within coax cables.
LIVE VOLTAGE DETECTION: With maximum DC cable resistance of 100 Ohms up to 4,000 ft long.
30 MIN AUTO-OFF: Automatically shuts off after 30 minutes while in 'Tone' mode to preserve battery life.INCLUDES: Cable Mapper & Toner (powered by (2)....

Check Stock