Top Catback Dual Reviews

Superchips 4865 Flashpaq for Nissan Titan, Armada, Infiniti QX56 5.6L/Pathfinder and Frontier 4.0L

  • Greater increase in torque, horsepower and drivability.
  • Works with most cold air intakes and catback exhausts.
  • NASA grade calibrations preloaded for maximum performance.
Check Stock

TYFYB Full Cat Back Exhaust Drift Spec Compatible with 2003 2004 2005 2006 2007 2008 350Z Infiniti G35, Silver

  • Fitment: Compatible with NS 350Z 2003-2008, Infinti G35 2003-2008.
  • 4.5" Flat tip with removable double-layer silencer, 3" piping.
  • Gain more horse power, faster response, averaging 10-15 extra hp.
  • Producing strong, deep and noticeable sound.
  • Package including: One Catback Exhaust with bolts and gaskets.
Check Stock

4 Inches Round Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01 Stainless Steel

  • ▶️ This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models.
  • ▶️ Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increases 15-25 horsepower or low end....
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Rounded Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

RULLINE 2 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel Universal Compatible with Muffler Downpipe Catback Pipe Connector

  • Suitable Size: ID: 2"/51mm + Overall Length 3.74"/95mm.
  • Universal Fitment: Fit for 2" ID tube (Perfect for Catback, Exhausts, Mufflers, Downpipes) of most car model such as VW Audi etc.
  • Brilliant Sealing: Superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe.
  • Durable Material: Thickened and widened stainless steel for long service life, Anti-Corrosion, Rust prevention, Clean and Bright Apperance.
  • Easy Installation: Easy to install without welding and drilling, Removable and Reusable.
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Type-S 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.5".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Base Model 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Non Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

PEDAL COMMANDER - PC65 for GMC Sierra (2007-2018) Fits: 1500, 2500HD, 3500HD, Base, SLE, SLT, Denali (4.3L 4.8L 5.3L 6.0L 6.2L 6.6L) Gas & Diesel | Throttle Response Controller

  • Greater increase in torque, horsepower and drivability.
  • Works with most cold air intakes and catback exhausts.
  • NASA grade calibrations preloaded for maximum performance.
Check Stock

DNA Motoring CBE-HC922 2.25 Inches Stainless Steel 15-25 Horsepower Low End Torque Catback Exhaust System Smooth Tone Sound Removable Silencer Compatible with 92-00 Honda Civic Coupe / Sedan

  • STRENGTH CONSTRUCTION - Made of high quality T-304 stainless steel with computerized mandrel-bends, which ensures the strength and durability to use.....
  • HIGH PERFORMANCE - Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone sound while ensures smooth....
  • GOOD DESIGN - The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect....
  • MUFFLER & DIMENSION - 4.0"(OD) removable silencer muffler tip. 2.25"(ID) Inlet / 2.25"(OD) main piping..
  • FITMENT - Compatible with 92-00 Honda Civic Coupe / Sedan. Performance full catback kit EJ EG EM..
Check Stock

WALI Monitor Stand Riser, Laptop Holder Printer Riser Desk Accessories, Vented Metal Platform and 4 inches Height Underneath Storage for Office Supplies (STT001), 1 Pack, Black

  • Dual Monitor Stand - for a clean and organized workspace. Monitor arms for 2 monitors, dual monitor stand or 2 monitor stand. EVEO Dual Monitor Stand quickly cuts down on unnecessary clutter and increases valuable surface space by raising your monitors above your desktop. Our innovative Dual Monitor Mount is VESA compatible SIZE 100x100 or 75x75 mm, a vesa adapter can be used if necessary. Each Dual monitor arm holds screen size up to 32" or 17.6 lbs..
  • 5 minutes installation - Easy to Install monitor desk mount- Don’t worry about having to call your coworker or your friends for help - our Dual Monitor Mount is designed so it can be easily installed by yourself in less than 5 minutes. EVEO Dual Monitor Mount sets up easily and can be attached to your screen in two different ways, either by desk clamp (up to 2 inches thick) or by grommet (up to 2 inches thick) for you max convenience. Super sturdy and elegant dual monitor stand..
  • Have it Your Way - EVEO premium vesa mount desk organizer, double monitor mount comes with a removable arm and spring system allowing you to perfectly position your screens. With EVEO Dual Monitor Mount You will always have the right viewing angle for you, with 360 ° rotation and Swivel of +90° ~ -90° . For an ext....
Check Stock

Rockville REQ20 19 Pro Rack Mount Dual 10-Band Graphic Equalizer EQ+VU Meters

  • Package Includes: (1) Rockville REQ20 19" Rack Mount Pro Dual 10 Band Graphic Equalizer EQ w/VU Meters, (1) Rockville RCDR10B 10' Dual RCA to Dual RCA....
  • Features Of REQ20: Dual 10 Band Graphic Equalizer (20 Bands Total), Frequency Response: 20Hz - 20KHz, Dual VU Meters Level Monitor, Blue LED on each....
  • Vacuum Fluorescent Display, Bass/Midrange/High EQ Controls, Separate Left/Right Channel Volume gain control, Signal to Noise Ratio: >88dB, Input....
  • Features of RCDR10B: Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable, Dual RCA to Dual RCA, Nickel-Plated for Rugged....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

Dual Lock Tape 1in x 2in 10pcs, Dual Lock Heavy Duty Mounting Tape，Interlocking Tape Reclosable Fastener Self Sticky 3550CF Dual Lock Strip for EZ Pass Mounting Tape Black

  • 【DUAL LOCK DATA】: 3550CF dual lock reclosable fastener. 1in x 2in 10 pieces black color. This dual lock has 150N(1in x 2in sample) lock strength, the mounting tape sticky side adhesion strength is 189N(1in x 2in sample). Hold up to 93°C(200°F) high temperature resistance..
  • 【DUAL LOCK ADVANTAGE】: The interlocking mushroom-shaped heads dual lock tape that easily slide over each other. Mushroom dual lock has 5 times lock strength of normal hook and loop tape.up to 1,000 openings and closings before losing 50% of original tensile strength..
  • 【DUAL LOCK QUALITY】: Dual Lock Reclosable Fastener designed with acrylic heavy duty mounting tape features strong adhesion, durable bond that is heat, chemical and UV resistant. With Dual Lock Reclosable Fastener, there is no need for any drilling, screwing or sewing tools which makes for quick installation. Best suited for indoor and outdoor use..
  • 【DUAL LOCK USE】: The Dual Lock tape is great for small jobs, prototyping and design evaluation.EZ pass mounting tape heavy duty.Securing fabric to furniture cushions. Point of purchase display and signage. General industrial applications. Marine and specialty vehicle applications. Alternative solutions for zippers, screws, buckles, etc..
Check Stock

Rockville 6-Zone Amplifier+(14) 8' 2-Way Black Ceiling Speakers for Restaurant

  • Package Includes: (1) Rockville RPG122K Dual 12″ Powered Speakers, Bluetooth+Mic+Speaker Stands+Cables. (1) Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display. (1) Rockville RNRMR10 10′ 3.5mm 1/8″ TRS to Dual RCA Cable. (1) Rockville RCDR10B 10′ Dual RCA to Dual RCA Pro Audio Cable 100% Copper.
  • What’s Included of RPG122K: (2) 12″ DJ/PA Speakers (1 active, and 1 passive that gets powered through the active via included 1/4″ cable). (2) Rugged Tr. Speaker Stands. (1) Wired Microphone. (1) Mic Clip. (1) XLR to XLR Cable for the Microphone. (1) 19 Ft. 1/4″ Cable for Active to Passive Speaker Connection. (1) Power Cable for Active Speaker. (1) Wireless Remote Control. Owner’s Manual. Warranty Card..
  • Includes of RWM1203VH: 2 wireless handheld microphones. 1 receiver unit. User manual. Batteries. Transfer Cable. Features: Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System. Large display on receiver + digital display on each mic. Each mic is large and solid with a nice weighted feel. Improved high performance wireless handheld microphone capsule. Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones..
  • Features of RNRMR10: Rockville RNRMR10 3.5....
Check Stock