Top Cat Back Exhaust Reviews

Genuine Toyota 2020 & Up 4Runner TRD Pro Performance Exhaust w/ Black Chrome Tip PTR03-89200

  • Hear your 4Runner engine roar with style. The TRD performance exhaust gives your engine greater power while giving off a bold sound..
  • Made from premium 304 stainless-steel, featuring a cat-back design with TRD logo stamped on a stylish black-chrome tip.
  • Less restrictive muffler design helps reduce back pressure, helps increase power and low-end torque.
  • Side exit tail pipe improves exhaust departure angle for better off-road performance.
  • Produces a deep and aggressive exhaust growl while meeting the legal 82-decibel noise limit, as required by law.
Check Stock

BRAND NEW FLOWMASTER OUTLAW CAT-BACK EXHAUST SYSTEM,3

  • Brand New Flowmaster Outlaw Cat-Back Exhaust System, 3" Stainless Steel Pipes, Dual Out Rear, Compatible with 2015-2017 Mustang GT 5.0L Coupe (Holley Part #817734).
  • Flowmaster Outlaw Cat-back exhaust system is perfect for the person looking for a deep & very aggressive sound level inside & outside the car. This bolt-on emissions-legal system features our exclusive dual 3" Scavenger Series X-pipe for maximum power & a deep unique sound..
  • The stainless steel X-pipe flows into a pair of our race proven Outlaw Series mufflers & exits into dual mandrel-bent 3" stainless steel tailpipes which are finished off with large 4" polished stainless steel tips. The system is designed for an easy fit & includes all necessary parts & hardware for an easy install..
  • Features: Includes our Exclusive Scavenger Series X-pipe | Very Aggressive Interior & Exterior Sound | Uses the Factory Hanger Locations | Dyno Tuned For Maximum Power | Race-proven Outlaw Mufflers | Stainless Steel Construction.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

Maxpow Qty2 Rear Hatchback Lift Support Struts 6191L 6191R Compatible with Celica 2000 2001 2002 2003 2004 2005 2006 Tailgate Liftgate Gas Support W/TRD Spoiler

  • Hear your 4Runner engine roar with style. The TRD performance exhaust gives your engine greater power while giving off a bold sound..
  • Made from premium 304 stainless-steel, featuring a cat-back design with TRD logo stamped on a stylish black-chrome tip.
  • Less restrictive muffler design helps reduce back pressure, helps increase power and low-end torque.
  • Side exit tail pipe improves exhaust departure angle for better off-road performance.
  • Produces a deep and aggressive exhaust growl while meeting the legal 82-decibel noise limit, as required by law.
Check Stock

Flowmaster 817556 Cat-Back Exhaust System for Chevy Camaro SS 6.2L V8 Engine

  • Mandrel bent 16 gauge stainless steel tubing.
  • Includes hangers and hardware for easy installation.
  • Connects After Factory Catalytic ConverterDescriptionFlowmaster 817556 Cat-Back Exhaust System for Chevy Camaro SS 6.2L V8 Engine.
Check Stock

Mopar 77072479 Dodge Durango Cat Back Exhaust

  • Genuine OEM Parts and Accessories offered by Molar (the Original Equipment Parts Supplier for Chrysler, Dodge, Jeep, Ram and Fiat vehicles).
  • Molar bolt-on, free flow cat-back exhaust systems feature T304 stainless steel construction (aircraft-quality) with mandrel-bent tubing, stainless band (Torch) clamps and polished tips.
  • They're rigorously designed and tested to provide horsepower and torque gains with improved fuel economy.
  • Give your vehicle a deeper exhaust tone without causing unwanted drone.
  • Vehicle must be equipped with 5. 7L Hemi Engine.
Check Stock

FLOWMASTER FLOWFX CAT-BACK EXHAUST SYSTEM,409S STAINLESS STEEL,4" BLACK CERAMIC TIPS,DUAL SAME SIDE EXIT,COMPATIBLE WITH 2009-2020 TUNDRA 4.6L, 4.7L & 5.7L

  • Brand New Flowmaster FlowFX Cat-Back Exhaust System, 409s Stainless Steel, 4" Black Ceramic Tips, Dual Same Side Exit, Compatible with 2009-2020 Tundra 4.6L, 4.7L & 5.7L (Holley Part #717786).
  • Introducing the new Flowmaster FlowFX Cat-back exhaust system. This bolt-on emissions legal system is perfect for the person looking for an exhaust with a moderately aggressive interior & exterior tone with all of the performance benefits that you would expect from Flowmaster. Features include dual 2.5"stainless steel mandrel-bent inlet tubes flowing into a FlowFX straight-through performance muffler, giving a deep powerful tone outside the truck with a deep mellow tone inside the cab..
  • The dual 2.5" tailpipes exit in front of the passenger side rear tire & are finished off with a pair of large 4" double wall black ceramic coated stainless tips. Includes all necessary parts, hardware & detailed instructions for an easy at home install..
  • Features: Large 4" Black Ceramic Coated Stainless Steel Tips | Straight-through FlowFX Series Performance Muffler | Dyno Tuned For Maximum Performance | Stainle....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 16638

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 15658 - Street Series, Stainless Steel 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust Tip - Corvette Performance Exhaust Kit

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. This exhaust kit is specifically designed for the 1986-1991 Chevrolet Corvette.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
  • STAINLESS STEEL CONSTRUCTION - Highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • LIMITED LIFETIME CONSTRUCTION WARRANTY - Performance that ....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 17876 - Pro Series, Stainless Steel 5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Muffler with No Tip - Ram Truck Exhaust Kit

  • AGGRESSIVE SOUND/PRO SERIES - This diesel performance exhaust is designed to increase power and sound without sacrificing comfortable levels of interior noise. Fast-flowing mandrel bent pipes with straight-through mufflers facilitate reduced exhaust restriction and that signature MagnaFlow sound. Specifically designed for the 2003-2007 Dodge Ram 2500/3500.
  • CAT-BACK PERFORMANCE - The system is 50-state legal, features 5” mandrel bent tubing and is designed to replace the original exhaust components following the last emissions device. Features a satin finish muffler and no tip with a no hassle emissions legal design.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorpora....
Check Stock

J2 Engineering J2-CBE-DS-034 Stainless Steel Cat Back Exhaust System [Compatible with 09-13 Infiniti G37 Sedan 4-Door]

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2008-2013 Infiniti G37 and 2014-2015 Q60.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock