Top Cas No 64 19 7 Reviews

Norseman 22903 1/16 in - 1/2 in Super Premium Black and Gold Oxide Hi-Molybdenum Steel Drill Bit Set 29-Piece grey

• Sizes: 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., 1/2 in..
• Drill through sheet metal, hard steel, acrylics and brass.

G.SKILL 64GB (4 x 16GB) TridentZ RGB Series DDR4 PC4-28800 3600 MHz 288-Pin Desktop Memory Model F4-3600C18Q-64GTZR

• Brand : G.SKILL , Series : TridentZ RGB Series , Model : F4-3600C18Q-64GTZR.
• Capacity 64GB (4 x 16GB) Type 288-Pin DDR4 SDRAM Speed DDR4 3600 (PC4 28800).
• CAS Latency 18 Timing 18-22-22-42 Voltage 1.35V ECC No.
• Buffered/Registered Unbuffered Color Black Heat Spreader Yes.

Amazon Basics Titanium Drill Bit Set - 29-Piece, M35 High Speed Steel HSS, for Steel, Alloy and Other Hard Metals

• 29 drill bits for cutting through hard metal, like stainless steel, aluminum alloy, and titanium alloy.
• Drill bit sizes include: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", and 1/2".
• Made of M35 Co5% high-speed steel (HSS) with a titanium finish for rugged, reliable strength.
• Precision grinding inclined blade helps ensure fast drilling, impressive cutting power, and excellent chip removal.
• Case included for easy storage and transport.
• backed by an Amazon Basics limited 1-year warranty.

V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches - 2 Pack

• STD1000DGNP V-DrillGuide (1/8-3/8") has 17 holes 1/64" increments (SAE) drill sizes: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8".
• STD2000DGNP V-DrillGuide (3/8-½") has 9 holes, in 1/64 increment (SAE) drill sizes: 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, ½".
• Portable, pocket-sized * Prevents drill bit wander * Centers the holes on pipes, dowels & outside corners.
• Round stock hole alignment marks on one side * Special nickel alloyed steel heat-treated for durability.
• Non-plated material with light oil coating to prevent rust * Non-glare finish with/Easy-to-read markings * American Engineered and Made in the USA.

INTOO Hss Cobalt Drill Bits Set 29PCS Triangle Shank,Industry Drill bits with Golden Ratio Tip,

• 003cb003eSPECIFICATIONS:003c/b003e29PCS COBALT DRILL BIT SET： 1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,32/64,3/8,25/64,13/32,27/64,7/16,29/64,15/32,31/64,1/2. Sizes from 1/8 to 1/2 with triangle shank..
• 003cb003eGOLDEN RATIO TIP:003c/b003eFrom size 5/32" with patented "Golden Ratio" Tip,which especially designed for heavy duty purpose, effect clean&smooth holes on hard metal like stainless steel,and moreover, at least 3 times longer life..
• 003cb003eCOBALT 5% MATERIAL:003c/b003e suitable for stainless steel or any hard metal,significantly increases the ware-resistance and durability..
• 003cb003eSTORAGE BOX:003c/b003estrong metal box..
• 003cb003eHOW TO USE:003c/b003econtrolling the drilling speed by lowest RPM would make drill life much longer than 3 times..

Century Drill & Tool 26529 Pro Grade Cobalt Drill Set, 29 Piece, Made in The USA, for Stainless Steel and Hard Metal

• Set includes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2" cobalt drill bits.
• Century Pro Grade drills are made from 5% industrial quality M35 cobalt alloy high speed steel..
• Cobalt is extremely heat resistant, when used and operated in power units that have a RPM speed of 1,500 or more for maximum efficiency..
• Lasts up to 12 times longer than the average consumer-grade high speed steel drill..
• 135 degree quick-cut point penetrates faster and will not walk or wander at the starting surface. Does not require a center punch or pilot hole..

Chrome Vanadium Brad Point Drill Bit Set, 29-Piece Imperial Sizes from 1/16" to 1/2" Inches Within Plastic Storage Case

• Professional Brad Point Drill Bit : There are 29 different sizes includes 1/16 - 5/64 - 3/32 -7/64 - 1/8 - 9/64 - 5/32 - 1 1/ 64 - 3/16 - 13/64 - 7/32 - 15/64 - 1/4 - 17/64 - 9/32 - 19/64 - 5/16 - 21/64 - 1 1/32 - 23/64 - 3/8 - 25/64 - 13/32 - 27/64 - 7/16 - 29/64 - 15/32 - 31/64 - 1/2 “ inches within plastic storage case.
• High-quality material: Made of high-quality chrome-vanadium steel. They are well heat treated in salt-bath furnace and tempered to achieve a minimal hardness of 56 HRc. In this case the cut tips can last longer after sharpening. For use in all kinds of soft and hard wood, Medium Density Fiberboard and even acrylic Plexiglas..
• Comfortable Use: The main spurs make sure easy and fast cut through the wood. The beveled cutting edge insure clean and precise drilling while press down the bit into board..
• 100% Satisfaction Guarantee: If you are not satisfied, Free return.

MaxTool 29 Pieces Drill Set 29PCs/29-Piece Twist Drill Bit Set 8% Cobalt HSS M42 Fully Ground 1/16“ to 1/2”x64th Fractional; JBS42G10R029P

• Drill bits include: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2 inch, 1/16 (0.0625) to 1/2" (0.5) in 1/64" increments.
• Premium 8% Cobalt High Speed Steel M42 (Hardness up to HRC66) provides all drills power cutting, impressive performace and long tool life.
• Precision fully ground edges and flutes ensure fast drilling, excellent chips moving smoothly and ultimate accuracy.
• Golden surface finish resists corrosion and increases the hardness of the drill bits for cutting hard steel, other metals, wood, and plastic.
• 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole.

COMOWARE Titanium Impact Drill Bit Set - 30 Pcs Hex Shank HSS, Quick Change Design, 1/16"-1/2"

• HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean..
• Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process..
• Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
• Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use..
• Organized Holder - This 30-piece set includes 29 drill bits and 1 quick-change adapter. A drill bits holder with size index is included in the set for easy storage and organizing. Sizes include 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"..

G.SKILL Aegis 16GB 288-Pin DDR4 SDRAM DDR4 2666 PC4 21300 Desktop Memory Model F4-2666C19S-16GIS

BUD Industries NBF-32334 Plastic Outdoor NEMA Economy Box 19.68\ L x 15.74\ W, Gray

• Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications.
• Complete with stainless steel wall mounting brackets and hardware.
• Plastic construction including hinge pins.
• External measures 19-43/64" length by 15-47/64" width by 7-55/64" height.
• internal measures 18-13/16" length by 14-7/8" width by 7-17/32" height.

Dimmer (Sunrise mix) (Sunrise mix)

• PEACE OF MIND: Set lights to automatically adjust with seasons so your family always comes back to a well-lit home.
• enable smart away to randomly turn your lights on/off to look like you’re home even if you’re away (Caséta Smart Hub, L-BDG2-WH, required).
• MOST CONNECTED: Caséta connects with more leading smart home devices – including Amazon Alexa, Apple HomeKit, the Google Assistant, Ring, Serena shades and Sonos – than any other smart lighting control brand (Caséta Smart Hub required).
• CONTROL YOUR WAY: Caséta puts the smarts in the switch so you can control a variety of ways – via the free Lutron app, your voice or from the wall.
• schedule lights to change at set times or activate scenes with the touch of a button (Caséta Smart Hub required).
• GET MORE, SPEND LESS: One Caséta smart switch can control many bulbs at once.
• make many bulbs smart, even your existing bulbs.
• get smart control of multiple styles of dimmable LED, incandescent and halogen bulbs.
• WORKS IN ANY HOME: Unlike other smart dimmer switches, Caséta Works in any home, of any age, as it does not require a neutral wire.
• WIRELESS REMOTE CONTROL: Use the included wireless Pico remote to turn your lights on, off or dim and brighten with the touch of a button from anywhere i....

COMOWARE Cobalt Drill Bit Set- 29Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16"-1/2"

• 29 PIECES INCLUDED: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"..
• HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance..
• PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster..
• PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials..
• ORGANIZED HOLDER: Set includes the drill bit holder with size index for easy storage and organizing..