Top Carbon Steel Square Pipes Reviews

Honeywell V5011N2089 1 2\ 2-Way F-NPT Globe Valve

Class 800 inline globe valve with non-rising stem and bolted bonnet for on/off actuation and flow control (throttling) in a pipeline.
Carbon steel valve body for tensile strength and hardness.
Bolted bonnet for tight assembly and reduced risk of leakage.
Socket-weld ends for welding to unthreaded pipes.
Maximum working pressure of 200 pounds per square inch (psi).

Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.

Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped..
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..

Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
Uncoated Tools for Versatile Use: Unco....

Check Stock

QWORK Exhaust Pipe Cutter, Cuts 3/4-Inch to 3-Inch Tailpipes and Exhaust Pipes, Universal Exhaust Tailpipe Tube Cutting Pliers, Carbon Steel Tubing Cutter with 14 Blades

High Quality: Premium 1045 steel handle and bearing steel blade, with great wear resistance, corrosion resistance and not easy to break,100% durable material..
Cutting Pipes: The exhaust pipe cutter can cuts pipes with diameters of 3/4inch to 3 inches..
14 Blades: There are 14 blades on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting..
Wide Application：It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc..
100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within a month you purchase this product, you can enjoy a worry-free return service. And any questions feel free to contact us, we will try our best to help you..

Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

... the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.

Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

... pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, whic....

Check Stock

DOMINTY Outdoor Wood Stove, Camp Tent Stove Portable Wood Burning Stove with Large Firebox for camping, Ice-fishing, Cookout, Hiking, Travel, Backpacking Trips

Carbon steel with high-temperature heat-resistant black finish..
Three interlocking stove pipes with 2.36 diameter and 26.5 total length..
Front hinged carbon steel door with adjustable air vent. Top platform can be used to keep coffee and sauce pans hot..
Pipes nest and entire stove fits inside itself for easy storage and transport. Only for outdoor use with proper ventilation..
Firebox Dimensions 210mmx285mmx270mm/ 8.3x 11.2x 10.6 (WxDxH)..

Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..

Check Stock

TenkBuff Adjustable Hacksaw Frame Set, 12 Inch Heavy Duty Hand Saw with 10 Extra Blades, Two Sawing Angles(45°/90°) for Sawing Wood, PVC Pipes, Steel Pipes, Frozen Meat (Upgrade, Yellow)

【SUPERIOR QUALITY】TenkBuff multifunctional hacksaw frame is made of high-quality aluminum alloy and high carbon steel, which is exquisite and durable for long-term use..
【TWO SAWING ANGLES】Hacksaw blades can be installed as 45 degree or 90 degree according to the needs of daily use, which makes the work easier and more convenient. .
【NON-SLIP HANDLE】The front and rear handles are wrapped with soft rubber, which reduces the fatigue of the arm during use, greatly saves your strength and makes your work more convenient and efficient. .
【SAW BLADES】TenkBuff hacksaw frame is equipped with 11 high-quality blades(1 bi-metal 24T blade, 5 high carbon steel 24T blades and 5 high carbon steel 18T blades), the sharp blades are widely used in sawing wood, steel pipes, PVC pipes, frozen meat, bones and so on..
【QUICK REPLACEMENT】Any 12inch(300mm) blades are suitable for TenkBuff hacksaw frame. If you want to change the blade, just rotate the adjustment knob below the handle. The replacement of the saw blade is really easy and quick without effort..

Check Stock

Glarks 3Pcs Groove Joint Pliers Set, 12In 10In 8In Adjustable Straight Jaw Tongue and Groove Pliers Water Pump Pliers for Nuts, Bolts, Water Pumps and Pipes

♛【What You Get】: In this groove joint pliers set, it include 3pcs 12in 10in 8in tongue and groove pliers for water pumps and pipes use. They are well packed in a box with a cloth bag for easy storage..
♛【High Quality Pliers】: The water pump pliers are made of carbon steel with high hardness, strong and durable for long time use, heat-treated teeth to ensure a steady, anti-slip clamp. Handle covered with anti-skip plastic, can easily wipe clean the oil on the surface, ergonomic design makes it comfortable to hold for long time use..
♛【Adjustable Jaw】: Our pliers adopt a sliding groove design, the jaw size can be adjusted by shifting, and there are 7 levels of adjustable. You do not need to test the size of the water pipe in advance, just adjust the button according to the specific sizes and tension of the nut bolt fasteners..
♛【Easy to Grip】: The toothed jaws can hold round, hexagonal and square shapes at will, reducing the wear of the jaws on water pipes and nuts. And its strong grip can also help you easily complete the operation and save effort..
♛【Widely Application】: These three sizes of pliers are very suitable for basic house plumbing repairs. If you occasionally need to repair sinks or heating pipes at home, they will....

Check Stock

Hoshizaki 427443-05 Hose Clamp

【NO EDGES OF SHARPNESS】-- These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
【PREVENT FLUID LEAKAGE】-- Item Type: Hose clamp. Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
【VERY TIGHT HOSE CLAMPS】-- Carbon steel color zinc plating. These clamps are very tight, so you have no worry about fixing of the threads comes off.
【HIGH QUALITY CARBON STEEL】-- Type: Elastic hose clamp. Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
【EASILY ADJUSTED BY SCREWDRIVER】-- Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.

Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
Cushioned for comfort and non-slip security..

Check Stock