Top Carbon Steel Lapped Reviews

Fowler 52-243-212-1, Inside Tube Micrometer With 2-12\ Measuring Range

  • Each set consists of an inside micrometer head and a series of fully hardened and lapped extension rods of different lengths.
  • Anvil and spindle are hardened and precision ground with microcap finish on ends.
  • Spindle thread hardened, ground and lapped.
Check Stock

Fowler 52-438-777-0 Gage Ball Set, 50 Pieces

  • Ball gage: Features sphericity within 0.000025" and surface finish to 1.5 microinches.
  • Accurate Readings: Chrome steel ball set with Grade 24 accuracy and AFBMA certificate.
  • Durable Material: This gage ball set is made of ground-lapped chrome steel hardened to 63RC.
  • Set Includes: A case for storage and ball pair sizes of 0.125, 0.14, 0.156, 0.18, 0.21, 0.25, 0.28, 0.31, 0.34, 0.375, 0.4, 0.43, 0.46, 0.5, 0.53, 0.56, 0.59, 0.625, 0.656, 0.68, 0.71, 0.75, 0.81, 0.87, 0.93, and 1 inch.
Check Stock

Taytools 0-6”, 0-150 mm, Digital Height Gauge, Electronic Height Gauge, 0.0005” Resolution DHG

  • Hardened steel scribe .25 inches wide with 2 inch reach.
  • Solid and substantial cast base (2 inches x 1.25 inches x 4 inches) with lapped bottom.
Check Stock

Taytools 468273 Low Angle Block Plane with 12 Degree Bed, Ductile Cast Iron Body, Stainless Knuckle Cap, Blade Hardness 55-60 HRC

  • Body made from stress-relieved ductile cast iron with precision lapped sides and sole.
  • 1/8 inch thick tool steel blade, hardened and tempered to 55-60 HRC. Sharpened to 25 degrees..
  • Sole precision ground to within 0.001” over the entire length.
  • Overall length 7”, 1-5/8" wide, 1.8 pounds.
Check Stock

HHIP 3902-3070 5 Piece Expanding Mandrel Set, 1/2\ - 1\ Size Range

  • Precision ground and heat treated for maximum concentricity and holding power..
  • The automatic expansion feature can be utilized on any bore (standard or no-standard) within the range of the mandrel..
  • Arbors are tapered, sleeves are flexible and Size is obtained by moving sleeve along arbor..
Check Stock

Fowler 52-248-001-1 Outside Metric Micrometer with 0-25mm Measuring Range

  • Micrometer Gage: The outside micrometer features a flat anvil and spindle for general purpose measuring with microfine graduations.
  • Accurate Measurements: Anvil and spindle hardened and precision ground with micro-lapped finish on tips.
  • 0.256" diameter of measuring faces, 0.01mm....
  • Durable Material: Hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with microfine graduations on a non-glare, satin chrome background, and....
  • Set Includes: A Fowler outside micrometer, a wrench, and a fitted case for storage.
Check Stock

YPG C3 Adjustable Limit Snap Gage with Hardened Steel Anvils, 3/4\-1\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

Jupiter 1602S XO Professional Bb Trumpet - 1602S-R - Reverse Leadpipe

  • Rose Brass Bell offer greater sonic presence and tonal warmth to the sound of the instrument Hand Fitted, Dual-Lapped Monel Valves provide exceptionally fast action and quiet operation Adjustable 3rd Valve Slide Ring allows the player to custom fit the instrument to achieve maximum performance comfort.
  • The Jupiter 1110RS is an intermediate Bb trumpet with a rose-brass bell, standard leadpipe and impeccable intonation.
  • It comes with features that are usually found on professional-level instruments.
  • It is well suited for the player wanting balanced tone quality without sacrificing power and clarity.
  • It has outstanding balance and excellent valve action, with hand-fitted, dual-lapped Monel valves.
Check Stock

Fowler 52-520-110-0 Adg Dial Indicator With 0-1 Measuring Range

  • PRECISION MEASUREMENTS: Features a 2.25" diameter dial with 0.001" graduations.
  • EASY READINGS: Microfine graduations in black for 0-100 continuous readings and red for 0-50-0 balanced readings.
  • movement mounted independently from the case on a rigid supporting plate, ensuring perfect and permanent alignment.
  • MEASURING PRESSURE: Supplied with lug backs positioned in 90° increments.
  • Group II and III gages measure with approximately 2oz. of pressure.
  • DURABLE CONSTRUCTION: Spindle rack is made of hardened stainless steel and features a carbide ball contact point.
  • brass cases and hard brass gear wheels prevent wear.
  • pinions of steel hardened, tempered, and lapped on teeth.
  • HIGH-QUALITY TOOL: Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
  • full 1-year warranty offered by Fowler High Precision.
Check Stock

Starrett 460B Micrometer Head, 0-0.5\ Range, 0.001\ Graduation, +/-0.0001\ Accuracy, Plain Thimble, 0.625\ Spindle Length

  • Vernier scale in inch units for taking precise measurements to 0.25”.
  • Plain stem for mounting in a fixture with a split-body clamp or setscrew.
  • Satin chrome finish helps resist rust and reduce glare.
  • Hardened steel spindle to help provide durability.
  • Micro-lapped measuring face helps provide accuracy.
Check Stock

YPG C5 Adjustable Limit Snap Gage with Hardened Steel Anvils, 1-3/4\-2\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG C2 Adjustable Limit Snap Gage with Hardened Steel Anvils, 1/4\-1/2\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'C' type adjustable limit snap gage.
  • A one piece, rectangular anvil and two adjustable square anvils all manufactured from hardened, lapped, tool steel, form the base of the measuring gage.
  • The large anvil gauging surfaces of the type 'C' ensures a long life.
  • Consistently high level of measuring capability and repeatability.
Check Stock

YPG A14 Adjustable Limit Snap Gage with 4 Plain Cylindrical Pins, 9\-10\ Measuring Range

  • A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage.
  • The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel.
  • The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves.
  • Standard blade measures 3/32" width by 3/16" depth.
Check Stock