Top Carbon Steel Fasteners Reviews

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm

【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 5mm, 2 Pcs

【Standard】5mm metric sizes, 3.03-inch (77mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm, 2 Pcs

【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

(400 pcs) 1/8\-27 X 5/16\

Superior quality parts by Holo-Krome, made in the U.S.A..
Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
An internal hex socket drive is also known as an Allen drive..
Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..

Check Stock

(100 pcs) 1/4\

Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
An internal hex socket drive is also known as an Allen drive..
Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..

Check Stock

(300 pcs) 1/2\ X 3/4\ (3/8\-16 Thread), Shoulder Screws, Hex Socket Drive, Alloy Steel

Shoulder screws are also known as shoulder bolts or stripper bolts..
An internal hex socket drive is also known as an Allen drive..
The shoulder acts as a shaft or dowel for rotating items such as bearings or bushings..
Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..

Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..

Check Stock

HolsterSmith Sheath and Holster Making - Thermoform Basic Combo Kit

CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear.....
EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and....
DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a....
100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product....

Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts #8-32 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (50)

C1010 High-Welding Quality, Low Carbon Steel, C1010 High-Welding Quality, Low Carbon Steel.
Compare to Buckeye Fasteners SKU: ND 3324.
Compare to Paulin Industries Part #: 08-3324.

Check Stock

Knife Blanks DM2719 7 Overall Damascus Drop Point Hunter Knife Blade

Carbon Steel Knive Blade Blank for making knifes. Full-Tang Blade Blanks with screws.
Knife Making Kit: Full Tang Blank Knife and 3 screws. DIY knife set. Durable and robust high carbon steel 1066 knife blank.
Tempered Hardened to 57-59 HRC True Scandi grind. Blade has Jimping on the spine.
Knifemaker kit includes 3 screws(Knife Handle Fasteners M2.5 Inner Hexagon Screw).
Dimensions: Total length 8 1/2 inches, Blade length 4 inches, Blade thickness 0.11 inches.

Check Stock

IRWIN Bolt Extractor Set for Lug Nuts Impact Rated 1859146

IMPACT performance series bits are designed specifically for impact drivers and the higher torque they produce..
Reverse spiral flutes grip harder as resistance increases for maximum grip power. Deep Well fits over studs to remove even recessed broken fasteners..
Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion and increases life of....
Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter..

Check Stock

DURATECH Super-Thin Open End Wrench Set, SAE, 8-Piece, Including 1/4\

【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 1/4"x9/32.

Check Stock

POWERTEC QWS1005#8 x 3/4” Wood Screw Set, Phillips Flat Head Deep Thread Screws - 100 Pack

INCLUDES: #8 x 3/4 Deep Thread Wood Screws (100 pack).
FUNCTION: These flat heads are primarily used in applications where the head of the fastener must sit flush with the mating surface, connecting wood to wood, attaching hinges or as wood fasteners hardware for wood projects.
FEATURES: A short screw construction, with a fine deep cut Philips drive to help minimize bit slippage, stripping or damage to your screw.
PREMIUM: These deep thread wood screws are made with durable carbon steel, and finished with a smooth zinc plated coating for added corrosion protection.
SPECIFICATIONS: Diameter: #8 | Length: 3/4” | Head Style: Flat | Thread Type: Deep Coarse | Quantity: 100 pcs | Material: Carbon Steel | Finish: Zinc Plated.

Check Stock