Top Carbon Steel Electrode Reviews

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
Good effect of welding stainless steel, adequate for DC welding.
Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
Longer storage time, sealed vacuum packaging to avoid oxidation.

Check Stock

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
Easy to operate for beginner , can read the output welding current with smart digital display..
Comes with a easy carrying handle easy for carry, can be used anywhere you need..

Check Stock

ACDelco GM Original Equipment 41-110 Iridium Spark Plug

Iridium offers better engine idle stability and smoother performance.
Iridium allows for smaller, more efficient electrode designs for improved cold starting and quicker acceleration.
Iridium fine-wire electrode helps improve ignition of the fuel and burns away carbon deposits on the tip of the plug as they form, to help improve fuel economy.
One piece suppressor seal blocks radio frequencies that can affect vehicle electronics.
Suppressor seal meters spark energy for longer electrode life and seals against combustion leakage.

Check Stock

ACDelco 41-993 Professional Iridium Spark Plug (Pack of 4)

Iridium offers better engine idle stability and smoother performance.
Iridium allows for smaller, more efficient electrode designs for improved cold starting and quicker acceleration.
Iridium fine-wire electrode helps improve ignition of the fuel and burns away carbon deposits on the tip of the plug as they form, to help improve fuel economy.
One piece suppressor seal blocks radio frequencies that can affect vehicle electronics.
Suppressor seal meters spark energy for longer electrode life and seals against combustion leakage. Before installing new spark plugs, use a gap guide to make sure your new spark plugs have the correct gap.

Check Stock

10 Pieces Large Electrode Pads for TENS Unit Replacement Pads for TENS Machine

UNIVERSAL COMPATIBILITY: the Electrode Pads Fit Most TENS/EMS in the Market with 2mm Pigtail/PIN type Connector.
PREMIUM QUALITY TENS Electrodes: Improved Carbon Film, Good Conductivity, Low Impedance and Uniform Current Distribution.
Self-adhesive Electrode Pads: Good Sticky, Quick Grab, Easy to Peel and Dry-out Resisting.
Medical Grade Pads for TENS Machine, Bio-compatible, Non-irritating, Superior Environmental Adaptability of Hydro-gel.
Reusable Electrode Pads with Individually Bagged for Convenience of Storage and Use..

Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.

Check Stock

ACDelco 41-103 Professional Iridium Spark Plug (6 Pack)

Iridium offers excellent engine idle stability and smooth performance.
Iridium allows for small, efficient electrode designs for reliable cold starting and quick acceleration.
Iridium fine-wire electrode helps burn away carbon deposits on the tip of the plug as they form.
One piece suppressor seal helps block radio frequencies that can affect vehicle electronics.
Suppressor seal meters spark energy for long electrode life and helps prevent combustion leakage.
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
GM regularly updates production and service part designs to integrate new materials and technologies.

Check Stock

Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 60volts (10 pieces)

Q179A is a gas pilot assembly (with a flame electrode rod) and ignition electrode, making it suitable for applications requiring an interrupted or intermittent electrically ignited gas pilot burner.
Primary aerated type burner is equipped with stainless steel fins that provide the proper flame rod area to ground area ratio for maximum flame signal and flame stabilization.
Stainless steel electrode(s) are mounted in ceramic insulators, which permit electrode adjustment.
Rajah connectors facilitate disconnecting (A1126 has terminal screws).

Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

TOOLIOM 135A Flux Core Welder MIG Welder 110V Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT DC Inverter

Weld up to .030"(0.8mm) and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
Powered By Standard 110(120V) Household Current..
Multi-functions in one machine:Suitable for MMA,Lift Tig,Flux Mig.Can weld stainless steel and carbon steel..
Big enough to handle 2 pounds rolls of wire..
Powerful Machine:Up to 135A output current that can weld mild steel up to 1/8 inch (3.0mm) plate..

Check Stock

ACDelco GM Original Equipment 41-103-IP Iridium Spark Plug

Iridium offers excellent engine idle stability and smooth performance.
Iridium allows for small, efficient electrode designs for reliable cold starting and quick acceleration.
Iridium fine-wire electrode helps burn away carbon deposits on the tip of the plug as they form.
One piece suppressor seal helps block radio frequencies that can affect vehicle electronics.
Suppressor seal meters spark energy for long electrode life and helps prevent combustion leakage.
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
GM regularly updates production and service part designs to integrate new materials and technologies.

Check Stock

LotFancy TENS Unit Replacement Pads 20PCS, Self-Adhesive Electrode Pads for TENS/EMS Massager (2” x 2” -12Pcs, 2” x 3.5”- 4Pcs, 1.25\ Round - 4Pcs)

【WHAT YOU GET】20 pack mixed size TENS unit pads. (4-Pack 2"x 3.5" Large rectangle electrodes pads, 12-Pack 2"x 2” square electrode pads and 4-pack 1.25” round tens electrode pads).
【SAFE AND COMFORTABLE】Our tens electrode pads are flexible and super comfortable to touch, white non-woven backing and premium gel adhesive, Latex-free and non-irritating to your skin.
【UNIVERSAL COMPATIBILITY】 Standard 2mm pin connector TENS electrodes pads fits most TENS (Transcutaneous electrical nerve stimulation) units.
EMS (Emergency Medical Services) massagers and muscle stimulators.
【EXCELLENT CONDUCTIVITY】Premium carbon electrode pads provides superior high conductivity, effective relief to muscle sore, tired muscles, muscle stiffness and chronic pain on the knee, calf, thigh, elbow, arm, neck, shoulder, wrist, hand, lower and upper back and much more. And the round electrode pads are perfect to treat pain on other small joints or flat areas.
【REUSABLE AND DURABLE】These tens unit replacement pads are designed for multiple uses if applied and removed with care.
individually and pre-sealed packaging for durability and convenient storage.

Check Stock

ACDelco GM Original Equipment 41-114 Iridium Spark Plug (Pack of 1)

Iridium offers excellent engine idle stability and smooth performance.
Iridium allows for small, efficient electrode designs for reliable cold starting and quick acceleration.
Iridium fine-wire electrode helps burn away carbon deposits on the tip of the plug as they form.
One piece suppressor seal helps block radio frequencies that can affect vehicle electronics.
Suppressor seal meters spark energy for long electrode life and helps prevent combustion leakage.
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
GM regularly updates production and service part designs to integrate new materials and technologies.

Check Stock