Top Carbon Steel Bolt Reviews

Breeze TB800 Standard T-Bolt Clamp Effective Diameter Range 8 - 8.31 203.2mm - 211.1mm

  • 3/4" (19mm) wide, 300 Series Stainless Steel Band.
  • Plated Carbon Steel Bolt, High Strength, One-Piece Stainless Steel Trunnion.
  • Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
  • Superior welded construction, Floating bridge liner.
  • Reliable, heavy duty method of assembling hose ducting connections and tubing..
Check Stock

LEM 1383 #32 Aluminum Hand Grinder

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 2 carbon steel grinding plates: 3/8" and 3/16".
Check Stock

Stainless Steel Knife Blade Replacement for Meat Grinder (TWO Blades) (#32)

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 2 carbon steel grinding plates: 3/8" and 3/16".
Check Stock

LEM 1384 #10 Aluminum Hand Grinder

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 1 each: carbon steel coarse and fine grinding plates.
Check Stock

Titan Attachments 24in Wide Backhoe Bucket, 4-Carbon Steel Teeth, Hydraulic Tilt Backhoe & Excavator Attachment

  • DESIGNED FOR THE TITAN BHBUCKET10, BHBUCKET12, BHBUCKET14, BHBUCKET16: This 3Piece Replacement Tooth Kit is a direct replacement for Titan Attachments 10, 12, 14, and 16inch Backhoe Buckets that will fit a Fronthoe and LW Series Backhoe. Titan recommends checking your buckets hole spacing before purchase. The mounting bolt spacing is 2inches..
  • REPLACEABLE TEETH: With just a little help from your toolbox, remove old or broken teeth and replace them with new ones..
  • FORGED CARBON STEEL: The teeth are forged from extradurable carbon steel and powdercoated black for a longerlasting finish..
  • DIMENSIONS: The replacement teeth are 7.48inches long, 1.7inches wide, and 1.4inches thick. Each tooth has two holes to fit a M12x55 mounting bolt with 2inch spacing..
Check Stock

MAXPOWER Bolt Cutter 24 inch, Chrome Molybdenum Steel Blade Heavy Duty Bolt Cutter

  • 24 inch Bolt cutter, opening capacity 7/8 inch (22mm), Overall length 600mm.
  • Cutting capacity: Up to 3/8 inch (10mm) for carbon steel, 5/16 inch (8mm) for alloy steel, blade hardness HRC58-60.
  • Drop forged Cr-Mo steel jaws, hardened and heat-treated for durability.
  • Precise blade alignment, built-in adjustment bolt provides greater power with less effort.
  • Ergonomic non-slip rubber handle for a comfortable grip and provide more leverage.
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • ..., and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

Craft&Ride Bolt-On Carbon Fiber Fender for Onewheel+ XR, Onewheel+, and Original Onewheel

  • Please note: This product is not the Onewheel electric skateboard. This is a fender for the Onewheel electric skateboard..
  • FUNCTION: The Craft&Ride Bolt-On Carbon Fiber Fender is one of the most important accessories for your Onewheel because it protects you and the surface of your Onewheel from water and debris that may be projected upward by your tire. Not only will you never have to worry about getting your shoes and pants dirty ever again, but you will also remain safe from injuries caused by debris propelled upward by your tire. You receive full wheel coverage with the Craft&Ride Bolt-On Carbon Fiber Fender..
  • DURABILITY: The Craft&Ride Bolt-On Carbon Fiber Fender is the strongest fender for Onewheel. With its vacuum molded carbon fiber construction, our fender exhibits a strength far superior to other materials. In combination with resin to form a composite, the Craft&Ride Bolt-On Carbon Fiber Fender maintains an extremely light weight of one pound whilst exhibiting an exceptionally rigid structure..
  • COMPATIBILITY: The Craft&Ride Bolt-On Carbon Fiber Fender is compatible with the Onewheel+ XR, Onewheel+, and original Onewheel..
Check Stock

Irwin Tools 53914 Accessories Impact Bolt Grip 3/4 /19mm 1/2 Dr

  • Bolt extractor is built for maximum durability and long life with impact drivers.
  • High-carbon steel helps ensure long bolt extractor life and great durability.
  • Universal lobular design fits most types of fasteners.
  • Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.
  • Black oxide finish resists corrosion and increases the life of the bolt extractor.
Check Stock

Grip Carbon Multi-Scraper - Clean All Major Bolt Carrier Parts: Bolt, Firing Pin, Bolt Carrier, Bolt Cam Pin - .223/5.56 MSR - Gunsmithing Cleaning Rebuild and Maintenance

  • SAY GOODBYE TO CARBON - Effortlessly clean carbon build up on your gear with our user-friendly bolt scraper tool. Our tool is designed for ease-of-use, so even first-timers can enjoy fast and effortless cleaning..
  • COMPACT AND READY TO GO - Take this lightweight, compact bolt scraper with you on your next adventure! Whether it's a day at the range or a hunting trip, keep your firearms in top shape without any added bulk to your gear..
  • OPTIMIZE FIREARM PERFORMANCE - Ensure the smooth operation of your bolts with regular cleaning and maintenance. Our tool effectively removes carbon buildup for optimal performance..
  • TOUGH AS NAILS: Unlike our competitors, the CAT M4 Tool is crafted with American-made stainless steel, so our bolt scraper tool is built to withstand heavy use and provide long-lasting performance..
  • LOVE IT OR YOUR MONEY BACK: If you don't absolutely love your CAT M4 Tool, we'll refund your entire purchase amount within 30 days. NO questions asked. Order now to save time cleaning your gear!.
Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

  • 1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
  • Bushing dimensions: 11/16" diameter x 2-1/8" long.
  • Bolt dimensions: 1/2" diameter x 3" long.
Check Stock

Time Is Money (feat. Bcg Joe Blow) [Explicit]

  • The tool is specifically designed to quickly clean the tough to reach surface of the bolt carrier group..
  • You can also use cartridge extractor scraping point to pull the bolt carrier group cotter pin, which makes breakdown easy. The pin punch helps with fast and safe removal of pins.
  • Four tool heads are magnetically removable. Made of sturdy steel. Each tool is precision cut to match different surfaces on the bolt carrier group.
  • The handle of the carbon scraper tool is textured anti-slip design.
  • The tin case keeps tools organized. It's a must have in your tool box.
Check Stock