Top Carbide Forming Dies Reviews

LEE PRECISION 90865, Carbide Factory Crimp Die.45 Colt

  • Carbide Die Sets consist of a Carbide Sizer Die, Seater Die, and Bullet Seater Plug.
Check Stock

MASTERCOOL 72480 Blue & Silver 37 Degree Flaring/Double Flaring Hydraulic Tool Kit

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER holder keeps adapters in place.
  • EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • THIS TOOL CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES 3/16, 1/4, 5/16, 3/8 and 1/2" dies 3/16, 1/4, 5/16, 3/8 and 1/2" double flare adapters and 37˚ cone packaged in a blow molded case.
Check Stock

LEE PRECISION App Bulge Buster Kit

  • Restore free function of rimless cases that have low base bulges.
  • Low base bulges usually occur from chambers that do not fully support the cartridge or cases resized in carbide dies from manufacturers other than Lee.
  • Kit will work with the 380 ACP, 10mm, 40 SandW, 41 AE (Use 40 SandW Factory Crimp Die), 45 ACP, 45 GAP, and 45 Win Mag cases.
  • Lee Carbide Factory Crimp Die must be purchased separately.
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER HOLDER keeps adapters in place.
  • EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
  • GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • metric bubble flare 4. 75, 6, 8, and 10mm.
  • GM transmission cooling line 3/8" and 1/2".
  • mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.
Check Stock

The Complete Reloading Manual for the .44 Magnum

  • ncludes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
  • Note: These dies can be used to reload 44 Magnum and 445 Super Mag..
Check Stock

MASTERCOOL 72475-PRC Universal Hydraulic Flaring Tool Set with Tube Cutter Blue and Silver

  • Tube and die set stabilizing arm for easy tube forming.
  • Magnetic adapter holder keeps adapters in place.
  • Equipped with an enlarged die set compression area for better grip of dies.
  • This tool can be used on "annealed steel" & "dead soft".
Check Stock

MASTERCOOL 72450 Double Metric Bubble Flaring Tool Set Black/Silver/Blue

  • Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
  • 45 & Double Flaring Adapters and Die Sets.
  • Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
  • Magnetic Adapter holder to keep adapters in place.
  • Equipped with an Enlarged Die Set Compression Area for better grip of dies.
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

Hard Tungsten Steel Ball, Alloy Steel Ball, Extrusion Ball, YG6 Tungsten Steel Ball, YG8 Alloy Ball, 13.01mm-13.1mm Diameter, 1PCS,13.06mm*1PCS

  • Tungsten steel ball properties: commonly known as cemented carbide balls, carbonized hook balls, refers to balls, balls made of cemented carbide as the material, cemented carbide balls have high hardness, wear resistance, corrosion resistance, bending resistance, use Harsh environment, can replace other material steel ball products.
  • Cemented carbide is mainly composed of carbide (WC. TiC) micron powder of high hardness refractory metal, with cobalt (C"o) or silver (Ni), aluminum (Mo) as binder, in a vacuum furnace. Or powder metallurgy products sintered in hydrogen reduction furnace, commonly used cemented carbide balls.
  • Process flow milling → formulating according to the requirements of the application → wetting → mixing → pulverization → drying → adding molding agent after the festival → drying → the mixture obtained after the festival → granulation → cold isostatic pressing → molding → Sintering → forming (blank) → packaging → storage.
  • Hook steel ball has a wide range of applications, such as: precision bearings, instruments, meters, pens, spraying machines, water mulberries, mechanical accessories, sealing cabinets, pump making, punching holes, oil fields, hydrochloric acid laboratories, hardness measuring instruments, ....
Check Stock

240 Grit, B Grade, Greased Based, Silicon Carbate, Loctite Clover Lapping Compound (1 Each)

  • Price For: Each Color: Gray Application: Lapping, Honing and Grinding Valve Seats, Gear Teeth, Dowel Holes In Dies, Bushings, Flat Surfaces On Seals and Castings, Machining Parts, Shafts, Knives and Cutting Blades Grit: 240 Grade: B Size: 1 lb. Item: Silicon Carbide Grease Mix Container Type: Can Country of Origin (subject to change): United States.
Check Stock

Kaka industrial 1.2×710 28-Inch Throat English Wheel, English Wheel Sheet Metal Shaper Benchtop Machine Heavy Duty, Solid Construction, Easy Operation Sheet Metal Forming with 6 Pieces Forming Wheels

  • DEEP THROAT DEPTH. KAKAIND English Wheel has a 28 inches deep throat, which allows the projects to be finished perfectly..
  • GREAT CAPACITY. It can work up to 18 Gauge in mild steel and 14 Gauge in aluminum.
  • SOLID DESIGN. The harden chrome forming wheel surface guarantees the heavy use of many year’s service.
  • 6 PIECES FORMING WHEELS ARE INCLUDED. The lower Wheels Dies are: 2”, 3", 4", 6", 8" and 12" Radius..
  • VERSATILITY AND EASY OPERATION. It can be used in car, motorcycle, aviation and racing car construction or restoration where sheet metal panels need to have compound curves formed.
Check Stock

Lathe Tools, 18.6inch Full Size Carbide Lathe Wood Turning Tools with Rougher Finisher Swan Neck Solid Handles for Beginner Experienced Turners to Work on Lathe

  • UNSTOPPABLE - Carbide lathe tools are becoming popular these days. They are easy to use, stay sharp for a long time, and the cutter swaps out in a few seconds when it becomes dull, you can get right to turning without all the fuss.
  • ERGONOMIC GRIP - Turning tools with a wood handle for the toolbar, The comfortable rubber grip helps reduce hand fatigue while turning, allows long time working, Vibration-absorbing toolbar, improve the surface finish of the workpiece.
  • EASY TO USE - Very simplified learning by turning, no complicated angles to learn and remember, for all skill levels, woodworking or DIY enthusiasts. Whether you're a beginner or an experienced turner, you'll get great results from our Carbide Turning Tools.
  • SUITABLE FOR - Suitable for massive and small events, along with cards, Decorative items, sheets, and boxes. Unlike fluffing, you will find that the Rougher is a great method for forming the external area of the jar and transforming the particles on the rotor.
  • OUR TURNING SYSTEM INCLUDES - (1) 11.4 '' wood shank, (3) 7.2 '' shafts with 8 carbide cutting heads of the circle, square and diamond, carbide tipped and a T15 wrench, all packed in a presentation storage box.
Check Stock