Top Carbide End Mill Cutter Reviews

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
Uses the two unused comers of APKT 1604 carbide inserts..
Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..

Check Stock

ACCUCUT I4KES 3/16 Carbide End Mill, 4 Flute, Square End, Ideal for Steel, Forge Steel, Copper and Alloys, 45 Degree Helix (5 Pieces)

GENERAL USAGE：Our end mill can be applied for steel, forge steel, copper, alloys & material < HRC 50.
SOLID CARBIDE：This end mill is made of ultra fine grain tungsten carbide. The hardness is 92 HRA.
AlTiCrN COATING：it features tough, resists wear & lubricity for smooth surface and heat protection.
4 FLUTE CUTTER：great for speedy cutting. Ideal for planar, step, groove, forming surface & more.
45° HELIX：high helix design can perform a better finishing cut than those with lower helix degree.

Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

[Specification]: Shank diameter 6mm/0.23".
[Single Flute End Mills]: 5 Pcs end mill bits.
[ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
[Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
[Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.

Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

[Specification]: Shank diameter 3.175mm 1/8”.
[Single Flute End Mills]: 10 Pcs end mill bits.
[ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
Offer a smooth cutting surface and chip clearing.
[Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
[Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.

Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.

Check Stock

Milling Cutter, Lightweight and Strong Metal Milling Cutter Not Easy To Break Durable Higher Accuracy for Outdoor

This metal mill set promises perfect milling performance and higher working efficiency..
5‑piece end mill cutter set brings more convenience to the changing and renewal of cutters..
Through mirror polishing process, the milling cutters have a high chip removal efficiency..
Single blade, acute angle and incisive edge provide the quick milling with extra accuracy..
Made of tungsten carbide, all the cutters are not easy to break in continuous processing..

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8\4T - Made in Taiwan (1 Piece, 3/8\)

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/8'4T - Made in Taiwan (5 Pieces, 1/8')

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE5/16"4T - Made in Taiwan (1 Piece, 5/16")

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

45-SD-C20-D20-110L 45 Degree Chamfer indexable Mill Cutter Arbor SDMB26152 Carbide Inserts

if insert on the cutter: smallest diameter 20mm, biggest diameter: 31.16mm.
45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).

Check Stock