Top Carbide Drills Reviews

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Golden)

  • Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
  • Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
  • This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
  • Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
  • Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
  • The top of the tapered drill can be applied to trim the surface and s....
Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Silver)

  • Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
  • Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
  • This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
  • Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
  • Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
  • The top of the tapered drill can be applied to trim the surface and s....
Check Stock

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/32')

  • ★【Premium Bright Finish 2/Pack】 multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1 inch, Overall Length: 2 inch, Dr....
Check Stock

PVC Pipe Reamer PVC Fitting Saver PVC Socket Saver with 0.315 Hex Shaft 1-½-Inch and 2 Inch Head Aluminum for Water Lines Drain Lines Vent Lines

  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC....
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill....
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

NewShark Concrete Drill Bit Set 10PCS, Masonry Drill Bits for Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall（3/16”-1/2” ）

  • 【SIZES OF MASONRY DRILL BITS】Includes these 3.8”~4.8” in length: 2× 3/16” (5mm), 4× 1/4” (6mm), 2× 5/16” (8mm).
  • 1×3/8” (10mm) and 1× 1/2”(12mm). Easily meet your drill needs..
  • 【HIGH-QUALITY MATERIALS】Made of high-quality carbide YG6X alloy, the rust-resistant treatment and reinforced head prevent the drill from cracking and provide longer service life..
  • 【SILKY DRILLING】Carbide YG6X concrete drill bit set is sharper, double design of cross arrow and spiral groove, accurate positioning, easy chip removal, and easy penetration of various materials..
  • 【EASY TO INSTALL AND USE】1/4 Inch Hex Shank Masonry Drill Bit Set with Locking Quick Change Collet for most common drills, power drills, hand drills and bench drills, easy to install and remove, more secure..
  • 【WIDE APPLICATION】 Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, bricks, wood, glass, stainless steel, concrete, etc. （Remember to add water or coolant when drilling）.
Check Stock

Cocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines

  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
Check Stock

Makita D-59178 18 Pc. Assorted Drill Bit Set

  • OUR ADVANTAGE COMPARED TO OTHER DRILLS：Compared with ordinary drills, JOERIC 's drills are harder and longer than ordinary triangular drills. The positioning of alloy cross-heads is also more accurate. Black electroplated drills are not prone to rust..
  • SMOOTH HOLE: Position drill by making slight dent with the tip before drilling. Small incision resistance. Feature drilling stably, opening neat, smooth, no broken edges, no tremor phenomenon, chip easily..
  • HIGH QUALITY－Carbide with a reinforced head that prevents bit cracking and provides a longer lif..
  • EASY TO EVACUATE CHIPS :U type slot design with fast drilling dust remove,1/4 Hex shank allows drill bit to be held tightly and stably in power drill..
  • PACKAGE INCLUDES:10Pcs masonry drill bit with 5 different sizes 3pc 3/16” (5mm), 3pc 1/4” (6mm), 2pc 5/16” (8mm).
  • 1pc 3/8” (10mm) and 1pc 1/2”(12mm) for various purposes, to meet the daily needs of your work..
Check Stock

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

  • Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
  • Can be used with standard drills, cordless drills, or impact drills.
  • Works great for vent lines, drain lines, water lines.
  • Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
  • PPR Fitting Reamers are NOT recommended for use on pressurized systems.
Check Stock

Tungsten Carbide Electric Nail Drill Bits Set for Acrylic Nails 3/32”, Emery Safety Professional Cuticle Diamond Bits for Manicure Efile, 7 Pieces Acrylic Gel Nail Kits Nail Art Salon Tools Home Use

  • [USEFUL] 7 pieces acrylic nail drill bits for professional manicurists and non-professional manicure enthusiasts: 1 x tungsten carbide fine barrel bit, 1 x tungsten carbide medium barrel bit, 1 x tungsten carbide coarse safety barrel bit, 1 x emery cone bit, 1 x emery needle bit, 1 x emery ball bit and 1 x cleaning brush..
  • [MULTI-FUNCTION] AIRSEE nail drill bit set can be used easily and quickly for reshaping, shortening, polishing naturel nails or acrylic nails, for removing cuticles, acrylic nails, nail polish, nail decorations and for cleaning under-nail, etc. A brush is also included to clean up the dust and debris caused by the manicure work..
  • [COMPLETE] Regardless of nail plate, nail edge or nail seam, our drill bit set for nails can easily reach. 3 of different roughness tungsten carbide bits are good at large area work, 3 of emery cuticle drill bits for nails or nail drills are good at safe edge and seam work. At the same time, our nail drill bits for acrylic nails also fully consider the safety and will not harm your skin at all..
  • [PROFESSIONAL] Superior tungsten carbide & emery materials: Tungsten carbide and emery are both corrosion and heat resistant abrasive materials that are almost as tough as diamond so they can provide you with the most....
Check Stock

Masonry Drill Bits Set - HPHOPE 10 Pcs Concrete Drill Bit Set for Tile, Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall

  • 【Sizes of Masonry Drill Bits】Includes these: 2 * 3/16" (4.7mm), 4 * 1/4" (6.3mm), 2 * 5/16"(8mm), 3/8" (9.5mm), 1/2" (12.7mm). Easily meet your drill needs.
  • 【Alloy YG6S】Carbide drill bit is made of industrial-grade alloy YG6S, which is more advanced than YG6X, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【Silky Drilling】Carbide YG6S concrete drill bit set is sharper, double design of cross arrow and spiral groove, precise positioning and easy chip removal, easy to penetrate various materials.
  • 【Easy to Install and Use】1/4 inch hex shank masonry drill bit set with lock-in quick change chuck, suitable for most common drills, electric drills, hand drills and bench drills, easy to install and remove and more secure.
  • 【Wide Application】Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, can easily drill holes in tile, concrete, brick, glass, ceramic, granite, wood. To reduce cracking, use water to cool and control the speed of drilling.
Check Stock