Top Car Intercooler Reviews

Mishimoto MMINT-RGR-19KBKBK Performance Intercooler Kit, Compatible With Ford Ranger 2.3L EcoBoost 2019+, Black Intercooler, Black Pipes

  • Direct-fit for 2019+ Ford Ranger 2.3L EcoBoost.
  • Dyno-proven max gains of 13.6 wheel horsepower and 13.9 lb-ft of torque when combined with Mishimoto intercooler pipes.
  • Intercooler increases flow by 18.6% over stock intercooler.
  • Intercooler pipes improve flow by 25.6% on the hot side and 16.6% on the cold side.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

aFe 46-20128 BladeRunner 2-1/2\ Intercooler Tube (Non-CARB Compliant)

  • Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
  • 2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
  • this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
  • These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
  • All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
  • This item is not for sale in California/Non CARB compliant.
Check Stock

31x12x3 inch Universal Turbo FMIC Intercooler + 3 inch Piping Kit For Toyota Supra MKIII MK3 7MGTE

  • Intercooler + Piping + Silicon Hose + T-Clamp.
  • Great for Many Turbo Intercooler Applications..
Check Stock

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

Remix Custom Front Mesh Grill Black Compatible with 2003-2006 Scion xB

  • Compatible with 2003 2004 2005 2006 Scion xB.
  • Made with Durable High Quality ABS Plastic.
  • Protects your car radiator, intercooler, and to other vital engine component.
  • Professional installation is strongly recommended.
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Cold Side Intercooler Pipe with Boots Compatible with 2003-2007 Ford 6.0L Powerstroke Diesel

  • Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
  • Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
  • Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Đi đâu mà vội mà vàng

  • Escape from the everyday with this thrilling building project. The LEGO Porsche 911 (10295) model car building kit is the perfect set for adults....
  • Explore all the Porsche 911 features including the rear-mounted, air-cooled flat-six engine, working steering, gearshift, emergency brake and tilting....
  • Which will you choose to build? The Turbo model with its turbocharged engine or the Targa with a removable roof that can be stored under the hood.
  • The Porsche 911 Turbo model car features a wide rear axle, an integrated spoiler, plus a turbocharged engine complete with intercooler.
  • The Porsche 911 Targa model car includes a removable roof that fits in the hood plus the iconic Targa bar with rear glass behind the driver.
Check Stock

Rev9 ICK-056-BLACK ICK-056-BLACK Front Mount Intercooler Kit, Stealth Black FMIC Performance Upgrade, Bolt On, compatible with Ford Focus ST 2013-18

  • compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
  • Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
  • With Wind Deflector To Tunnel Air Into The intercooler.
  • Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
  • Included Hardware For Direct Bolt On Installation.
  • No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..
Check Stock

T04E 8PC T3/T4 UNIVERSAL TURBO KIT V-BAND TURBOCHARGER WASTEGATE INTERCOOLER

  • Perfect for 4/6 cylinder 1.5L-2.5L engines. Up to 400HP. Power performance output capability = 25-35 psi. CNC machined flanges..
  • 1 x Turbo Oil Return / Feeding Line Kit: Stainless steel braided, it helps circulate oil from the turbo charger to the oil pan.
  • 1 x Intercooler : Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Intercooler core size: 21*7*2.5 . Support up to 350 hp for this small intercooler size – tube and fin style ..
  • balancing Test by TURBOTECHNICS VSR3. G3-min-Flow VNT Turbo testing. Advanced Actuator Tester/Programmer.
  • Need modifications – Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. ).
Check Stock