Top Camera Cage Accessories Reviews

Proaim Muffle Cage for GH3, GH4 & GH5 Cameras

Includes: Aluminum Cage with Top Handle, Shoe Mount and 15mm Rods – Custom Fit for the Panasonic Lumix DMC-GH3 & GH4- Allows access to all camera functions and ports.
Anodized Aluminum. Multi-Threaded Cage and Removable Top Handle. Rod Clamp with 15mm Rods for Mounting Follow Focus, Matte Box, etc..
The form fitting camera cage allows full access to the camera’s controls, buttons, battery and SD card slot. The cold shoes, 1/4″ and 3/8″ mounting points allows you to mount different accessories..
Quick release base plate allows you to easily remove and remount the camera to the rods. With 1/4″ and 3/8″ mounting points on the quick release plate, the cage can be easily mounted and removed from a tripod, rig or other device..
The HDMI plug protector frees you from worrying about wearing out or damaging the micro HDMI port by repeatedly plugging or replugging a micro HDMI cable into your camera body..

Check Stock

MAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K

... locating pins and rubber pads on the base plate to prevent twisting..
Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories..

Check Stock

SMALLRIG GH5 GH5S Cage Kit for Panasonic Lumix with Top Handgrip and GH5 GH5S Cage - 3188

FOR GH5 & GH5S: SMALLRIG 3188 includes a form-fitting cage and a useful top handle. Specifically designed for GH5 and GH5S cameras, it maintains full access to your camera's controls, buttons and battery compartment..
NEW VERSION CAGE: The cage secures to the camera via a 1/4”-20 screw and each side features an m2.5 thread for further security, so the twisting problem is solved. NOTE: Please remove the strap ring on the side of the camera first and then tighten the two screws..
HANDHELD SHOOTING MODE: Attached to the cage via two 1/4’’ screws, the top handle enables you to have a comfortable and stable handheld shooting experience..
MOUNTING POINTS: Cold shoe mounts, NATO rail, multiple 1/4"-20 & 3/8"-16, and locating holes for ARRI standard are built into the camera cage and the top handle. You could have additional attachment options and DIY your camera kit..
RELATED ACCESSORIES: Attach SMALLRIG HDMI Lock 1822 on the side via 1/4’’-20 screws to protect your camera HDMI port and cables. Attach SMALLRIG Side Handle HSS2425 to have more flexible grip..

Check Stock

SMALLRIG Camera Cage Only for Sony Alpha 7S III / A7S III / A7SIII / A7S3 - 2999

...SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching..
【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764..
【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm..
【SWEET DESIGN】Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss..

Check Stock

NEEWER Aluminum Alloy Filmmaking Camera Video Cage Rig with Top Handle, 2 Grips, Standard Arca Type Base, Compatible with Sony Alpha 7S III A7IV A6600 Canon EOS R5C R5 R6 DSLR Mirrorless Camera, VS107

...amcorders up to 33lb/15kg.(This product is not suitable for a lens with support ring, so please remove the support ring before use).
【Comprehensive Upgrade】 The upgraded cage features a dual-rod base, two 15mm-diameter rods, and a standard 60mm rail gauge for attaching follow focus, hood, lens support, and other accessories. The non-slip top silicone handle and the two ergonomic handgrips with synthetic leather textures and finger contours offer you a comfortable grip.
【Diverse Mounting Points】 The top of the cage has numerous 1/4” and 3/8” female threads, cold shoes, and compatible ARRI locating holes for mounting magic arms, cold shoe mount adapters, microphones, field monitors, LED video lights, RGB lights, and other accessories that will facilitate your video shooting in any situation.
【Easy Camera Installation】 An integrated 1/4” aluminum alloy thumb screw with knurls adds friction for quick, convenient, and tool-free camera installation. The enlarged silicone pad prevents your camera and camcorder from wobbling and protects against scratches.
【Handheld & Tripod-Mounted】 Grasp the cage with the two contoured handgrips for stable shooting or hold the top silicone handle for low-angle shots. There are two ways to mount the cage o....

Check Stock

Neewer Camera Cage Compatible with Sony Alpha 7S III A7S3 Aluminum Alloy DSLR Rig Stabilizer with 1/4” & 3/8” Threads Cold Shoe and NATO Rail for Vlogging Filmmaking Video Shooting - VS102

【Compact Camera Cage】 This aluminum alloy camera cage is a simple yet versatile platform for you to add accessories and capture stunning footage....
【Multiple Mounting Options】 With NATO accessory rail cold shoe mount, strap slots, multiple 1/4”-20 and 3/8”-16 female threads, and ARRI-style....
【Wide Compatibility】 The T-shaped hex key magnetically attached to the bottom of the cage can help tighten the camera screws. The cage is also....
【Secure Mounting】 The built-in 1/4”-20 screw attaches your Sony Alpha 7S III to the cage. Use the hex key to fix the M2.5 screw into the....
【Solid Construction】 Made of CNC-milled aluminum alloy with a black anodized finish, the camera cage is durable and wear-resistant. It also gives....

Check Stock

Beginners Guide to Sony A7iv Basic Operations: A Simplified User Guide to Master your Sony A7 iv mirrorless camera

...lRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching..
【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4″-20 and 3/8″-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764..
【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm..
【SWEET DESIGN】Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss..
【Power Backup Solution】SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger....

Check Stock

MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2

...the bottom to prevent wiggles, and comes with rubber pad at the bottom to protect the camera from scratching..
【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
【T5 SSD Holder & Cable Clamp】The T5 holder is fixed to the cage by cold shoe, securing the T5 SSD and protecting the USB-C cable. The cable clamp attaches to the side of the cage with one 1/4”-20 screw, securing bot....

Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

[PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins..
[QUICK RELEASE TOP HANDLE] Provides More Flexibility When Operating and Handling.The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
[RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.....

Check Stock

SmallRig Cage with Silicone Handgrip & Cold Shoe for Sony a6100, a6300, a6400 - 3164

【FOR SONY A6400/A6300/A6100】The SmallRig Camera Cage 3164 is especially designed for Sony cameras a6400/a6300/a6100 with a removable, non-slip and soft silicone handgrip..
【MULTIPLE MOUNTING POINTS】The SmallRig Cage with Silicone Handle 3164 features two cold shoes, multiple 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for attaching the articulating arms, external monitors, microphones or other accessories..
【SECURE LOCK POINTS & PREVENT TWISTING】This aluminum alloy cage 3164 secures the camera via a 1/4"-20 screw, and a M2.5 screw on the side to prevent twisting. Plus, an optional HDMI Cable Clamp 1693 is separately available to protect the HDMI port..
【INTEGRATED PLATE FOR ARCA-STYLE】There is an integrated plate for Arca-Type on the cage bottom, and it allows you to mount quickly on a tripod of Arca standard..
【BUILT-IN SCREWDRIVER】A built-in screwdriver stores on the 3164 cage bottom for quick assembly and disassembly. Also, the mounting surface features rubber pads that hold your camera securely to prevent scratching..

Check Stock

NEEWER Camera Cage Compatible with Canon EOS R5 R6 SmallRig Aluminum Alloy DSLR Rig Stabilizer with 1/4 & 3/8 Threads Cold Shoe and NATO Rail for Vlogging Filmmaking Video Recording VS101

【Compact Camera Cage】 This aluminum alloy camera cage is a simple yet versatile platform for you to add accessories and capture stunning footage....
【Multiple Mounting Options】 With NATO accessory rail, cold shoe mount, strap slots, multiple 1/4"-20 and 3/8"-16 female threads, and ARRI-style....
【Wide Compatibility】 The T-shaped hex key is magnetically attached to the bottom of the cage for tightening screws. The cage also has a standard....
【Secure Mounting】 Built-in bottom 1/4”-20 screw with dual locating pins securely attaches your Canon EOS R5/R6 in the cage and the rubber pad....
【Solid Construction】 Made of CNC-milled aluminum alloy with a black anodized finish, the camera cage is durable, wear-resistant, and offers your....

Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

...bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting..

Check Stock

SmallRig Cold Shoe Mount Adapter (2pcs Pack) with 1/4\-20 Thread for Camera Cage Flash LED Moniter - 2060

SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony (a6500 a6300 a6500), cage for panasonic (gh5 gh4 gh3), etc..
The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe..
There comes with two secure bending bevels on the one end to prevent accidental removal.
The arrowheads on the cold shoe show the direction to mount additional accessories..
NOTE: This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 1/4"-20 screw, the M2.5 threaded is unnecessary..

Check Stock