Top Cam Lock Hose Clamps Reviews

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
Temperature Range: 23°F to 149°F (-5°C to 65°C).
003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
widely used in household, mine, factory, agriculture, and architectural engineering.
This drain hose can adapt to most outdoor conditions and all seasons..

Check Stock

Boao 4 Pieces Adjustable 304 Stainless Steel Duct Clamps Hose Clamp (12 Inch)

Package includes: 4 pieces 12 inch hose clamps.
Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use.
Function: can lock the hose very tightly, leak-proof, and ensure of clamps long lasting, quad lock construction.
Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, secures ducting tightly in place (the screwdriver not included).
Wide application: these dust clamps can be applied to secure hoses, pipe, cable, tube, fuel lines in domestic applications, automotive, industrial, boat, etc..

Check Stock

iPower 6 Inch Adjustable 304 Stainless Steel Duct Hose Clamps for Ducting Ventilation, Pipe, Heating and Cooling, Worm Drive, 4 Pcs

Adjustable diameter: Fit for hose outside diameter 5.75-6.46 inch. Hose clamps are flexible and ductile with wide adjustable size range from 146-164mm. Package includes: 4 Pcs 6" hose clamps..
Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly..
Prevent leakage: Firm locking head and belt holes can lock the hose very firmly, effectively solves the problem of liquid and gas leakage of the hose. Make your use of the hose safer..
Premium high quality: Made in 304 stainless steel with worm drive lock. Provide strong performance in anti-corrosion, waterproofing, rust-resistance, durability and long life-cycles..
Wide application: Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, household etc..

Check Stock

iPower 10 Inch Adjustable 304 Stainless Steel Duct Hose Clamps for Ducting Ventilation, Pipe, Heating and Cooling, Worm Drive, 8 Pcs

Adjustable diameter: Fit for hose outside diameter 9.69-10.39 inch. Hose clamps are flexible and ductile with wide adjustable size range from 246-264mm. Package includes: 8 Pcs 10" hose clamps..
Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly..
Prevent leakage: Firm locking head and belt holes can lock the hose very firmly, effectively solves the problem of liquid and gas leakage of the hose. Make your use of the hose safer..
Premium high quality: Made in 304 stainless steel with worm drive lock. Provide strong performance in anti-corrosion, waterproofing, rust-resistance, durability and long life-cycles..
Wide application: Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, household etc..

Check Stock

Tool Guy Republic Timing Gear Clamp Set - Holds Valve Timing - Single, dual or quad overhead cam

Use on single, dual or quad overhead cam engines to hold valve timing during belt replacement. Ideal for diesel injection pump belt replacement..
Single Cam Clamps lock gears individually.
Patented “Uni-Fit” positive lock tooth design securely engages all cam gear sizes.
Constructed from high strength industrial grade non-corrosive materials.

Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

【Flexible hose pliers with long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.

Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....

Check Stock

MIAHART 6 inch Hose Clamp Adjustable 304 Stainless Steel Duct Clamps Worm Gear Adjustable 141mm-165mm Hose Clamp (Pack of 6)

Package includes 6pcs 6-inch hose clamps,adjusts diameter from 141mm - 165mm(5.5-6.5inch).
Design: can lock the hose very tightly, leak-proof, and ensure of clamps long-lasting, lock construction.
Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use.
Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place(Note: the screwdriver not included).
Application：6 inch duct clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines in automotive, industrial, mechanical, agriculture, boat/marine, shield, household, etc.

Check Stock

POWERTEC 71164 Aluminum Cam Clamp for Woodworking, 1/4”-20 Threaded Insert - 2PK

INCLUDES: (2) Cam Levers, (2) 3” T-Bolts, (2) Steel Washers, (2) Rubber Washers.
FUNCTION: Designed to provide you with a quick release and clamping tool for woodworking jigs and fixtures - perfect for high speed clamping and repetitive work.
FEATURES: A universal 1/4"-20 threaded insert, along with a secure cam-activated lock ensuring a quick lock and smooth release for a streamlined workflow.
APPLICATIONS: Cam clamps are ideal for hold down clamping projects, t-track, router or drill press table fence optimization, bench top operations, general purpose workshop needs and more.
BUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use.

Check Stock

POWERTEC 71502 Aluminum Cam Clamp for Woodworking, 5/16”-18 Threaded Insert - 4PK

INCLUDES: (4) Cam Levers, (4) 3” T-Bolts, (4) Steel Washers, (4) Rubber Washers.
FUNCTION: Designed to provide you with a quick release and clamping tool for woodworking jigs and fixtures - perfect for high speed clamping and repetitive work.
FEATURES: A universal 5/16"-18 threaded insert, along with a secure cam-activated lock ensuring a quick lock and smooth release for a streamlined workflow.
APPLICATIONS: Cam clamps are ideal for hold down clamping projects, t-track, router or drill press table fence optimization, bench top operations, general purpose workshop needs and more.
BUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use.

Check Stock

GLIDESTORE 4 Inch Hose Clamps Stainless Steel (Adjustable 3 15/16 - 4 3/8” Diameter), Easy Turn Thumb Screw Metal Clamp, Ideal for Dryer and Plastic Vent Ducts, Easy Turn Clamp (Pack of 2)

✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund..
✔ HIGH-END MATERIAL: Hose clamps stainless steel made of Stainless steel, constructed to resist scaling and corrosion and ensure long- term use..
✔ AMAZING FUNCTION: These hose clamps are used to lock the hose tightly with a view to preventing flow leakage. This hose clamps can be applied for dryer, plastic vent ducts, securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on..
✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any other tools..
✔ HUGE QUANTILY, SMALL COST: Each package consists of 2 pack 4 inch hose clamps, the size of each clamp is about 4 inch (Adjustable 3 15/16 - 4 3/8” Diameter)..

Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

...astic with good non-conductivity to ensure your safety during operation, the hose clamp pliers set is of highly durable, long lasting and chemical/fuel resistant. No need to worry, it dose not melt when in contact with chemicals or fluids..
【Locking Function】These line clamps flexible hose clamps pliers have smooth rounded jaw edges and adjustable locking ring locking function which can squeeze the hose against the stable surface over a wide area without damage the hose. Each hose clamp plier includes a slider to lock the pinch off pliers in place, radiator hose clamps holds hoses in place so that you can work with both hands..
【Ergonomic designed】This plastic fuel line clamp pliers set adopts ergonomic designed handle for comfortable grip and easy use, the grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue..
【Specifications】In these pinch pliers kit, you will get 3 sizes pinch off pliers to fit all types of hoses, including straight hose clamp pliers: 5.9"/155mm, 7.3"/185mm, 10"/255mm. This hose plier set can clamp hoses with diameters of 15mm, 20mm....

Check Stock

Iococee 275/330 Gallon IBC Tote Drain Adapter 2 inch cam lock, convert 2 inch to a 1 inch,Garden Hose Food Grade Connection

FOOD GRADE:This 2 inch cam lock is most suitable for drinking water and other edible products..
SERVICE:No matter what the reason, as long as you have questions or dissatisfaction,we will provide you with 100% replacement or refund service.Happy shopping！Happy life!.
MATERIAL:The 2 inch cam lock are made of strong polypropylene.Our products are more resistant to acidic water and chemical corrosion than brass materials.Greatly increase the service life of the product..
LARGE SILICONE GASKET:The 2 inch cam lock has a built-in large silicone gasket, which effectively prevents liquid leakage..
USE:This 2 inch cam lock is mostly found in IBC tote containers.Our product will convert 2 inch male camlock fitting to a 1 inch garden hose fitting.Solve your worries easily！.

Check Stock