Top Cam And Bolt Connectors Reviews

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • ... is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • ... kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

  • Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications.
  • Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
  • Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
  • Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
  • Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very cl....
Check Stock

ATPEAM Chain Breaker Rivet Cutter | 13PCS Chain Breaker Set Cutter Rivet Tool Kit Chain Breaker for Motorcycle, Bike, ATV

  • ...The chainbreaker rivet cutter tool is made of heavy-duty hardened steel, refusing strong strength and durability, easy to use.
  • Suitable for different sizes of cam chains such as bicycles, motorcycles, and cam drives.
  • Easy To Use: Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin.
  • Ideal Motorcyle Mechanic Tool: This chain breaker riveting cutter is designed to rivet links to form endless chains, and is versatile.
  • The chainbreaker rivet cutter tool can be used on cam chains to drive chains or as a chain breaker by pushing out pins.
  • Package Included: (1) chain press + (1) handle + (1) lever + (3) anvils, (3) pins – 2.2mm, 2.9mm, 3.8mm + (1) riveter + (1) spring + (2) press plates + (1) carrying case.
Check Stock

Mycheng 6Pcs Carburetor Adjustment Tool Kit with Case Including 21 Teeth Splined/7 Teeth Splined/Hexagon/ Double D/Small Head Single D/Single D for 2 Cycle Carburetor Engine

  • Adjustable tool is designed to both hold and turn cam sprockets.
  • The tool is needed to turn the cam sprockets to adjust the cam position.
  • Can also be used to hold the cam sprocket in place when removing the cam bolt.
  • Will work on all single and dual overhead cam sprockets with holes.
Check Stock

Andrews Cam .495 Lift EV27 Grind for Harley/For Harley EVO Big Twin

  • Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit..
  • Bolt-in street cam with fast open and close ramps.
  • Similar in timing to EV3 but designed to produce a very broad torque band.
  • Excellent cam for full dress touring bikes.
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

Brian Tooley BTR Turbo LS Stage 1 Cam, Spring Kit with Titanium Retainers, Chromoly Pushrods and Install Gasket Kit LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft, Spring Set and Gasket Kit)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit, Pushrods and Install Gasket Kit.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Titanium Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • Includes CAM INSTALL GASKET KIT, Front Timing Cover Gasket, Timing Cover Damper, Seal Water Pump Gaskets, LS CRANKSHAFT DAMPER BOLT.
  • When the combination calls for something a little milder, the stage 1 is where to look. It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock

Cam v3 with Color Night Vision, Wired 1080p HD Indoor/Outdoor Video Camera, 2-Way Audio, Compatible with Alexa

  • Product 1: Fingerprint Unlock: Gone are the days of fumbling for keys. Wyze Lock Bolt recognizes your fingerprint and unlocks the door in under a second. Store up to 50 fingerprints in the Wyze app for frequent guests or additional finger options for yourself..
  • Product 1: Numbered Keypad (+ Anti-Peep): Use a code to get in and out. Feel free to create unique codes for each person, so you can tell who came in when. Or, decide when they have access. With anti-peeping, don't worry if someone watches you enter your code. Simply add extra digits before or after your code and Wyze Lock Bolt will still unlock..
  • Product 1: View the lock/unlock history: Bluetooth connection required. Know who came and went in the Wyze app. You can see how it unlocked, the exact time, and if there were any failed code attempts..
  • Product 1: Auto Lock: Never forget to lock the door behind you. By enabling Auto-Lock, Wyze Lock Bolt automatically locks the door after a custom-set amount of time..
  • Product 2: Color Night Vision: Record night time video in full, vivid color in environments up to 25x darker than traditional cameras..
  • Product 2: Indoor/Outdoor (IP65): The Wyze Cam v3 is a wired water-resistant, video camera that you can confidently install outside in the rain or inside in t....
Check Stock

25ft Long Power Extension Cable Compatible with Wyze Cam V2 Blink Mini NestCam Zmodo Security Camera Flat Micro USB Cord 3-Pack

  • Compatible with WyzeCam V3, Wyze Cam Pan, Nest Cam, Blink Mini, Zmodo, Netvue, Alexa Cloud Cam, YI Dome Camera, Furbo Dog Camera, Oculus Go, Kasa Cam,....
  • 25 foot (8m) charging cord keeps your indoor or outdoor camera connected over a much greater distance.
  • Flat and thin cable can easily run it through the window or door.
  • TPE material, durable and prevent tangling.
Check Stock

10 Pcs High Strength Split Bolt Connectors 4 Gauge 8 Gauge Solid UL Listed

  • (10) Pieces of High Strength Split Bolt Connectors.
  • High Strength Split Bolt Connectors UL Listed.
  • Equal Main and Tap Range 4 Solid to 8 Solid.
  • Conductor Range 14 Solid, Pressure Bar Material Copper.
Check Stock

50 Pcs High Strength Split Bolt Connectors 4 Gauge 8 Gauge Solid UL Listed

  • (50) Pieces of High Strength Split Bolt Connectors.
  • High Strength Split Bolt Connectors UL Listed.
  • Equal Main and Tap Range 4 Solid to 8 Solid.
  • Conductor Range 14 Solid, Pressure Bar Material Copper.
Check Stock