Top Caliper Piston Replacement Kit Reviews

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

Spurtar Brake Caliper Press Tool Brake Caliper Tool Spreader 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue

  • MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers.
  • RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts.
Check Stock

BTSHUB Professional 12pcs Front and Rear Caliper Disc Brake Screw-in Wind Back Rewind and Piston Compression Tool Kit for Brake Pad Replacement

  • Professional Usage: The Caliper Wind Back Disc Brake Pad Piston Compressor Tool is used for brake pad replacement- rotating piston into the caliper for a proper fit.
  • Works to wind back piston and provides enough clearance for new pads. Ideal for rotating piston back into caliper and exposing new pads.
  • Universal Adapters: Includes 10 different piston adapters, universal for all screw-type calipers that require the piston to be wound back into the housing (not compatible with hollow pistons).
  • it fits all domestic, European and Japanese cars.
  • Long Last: All the parts are CNC machined alloy steel with rust-resistant sandblasted finish stand up to repeated use and long term service.
  • Easy to Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x holder, 1x main body, 10x adapter, and 1x plastic carrying case.
Check Stock

Motormite 21151 Drum Brake Bar

  • 13pcs Kits Rotates Piston Back Into Caliper Replacement forting Of New Brake Shoes And Pads.
  • This Tool Kit Allows You to Rewind the Pistons In Brake Calipers By Hand, Without Damaging the Gaskets in the Pistons and Seals.
  • Precisely Made Adaptor Plates with Thrust Bolt Assembly and Reaction Plate.
  • Includes Left And Right Handed Thrust Bolt And 12 pcs Adapters Replacement for Using In Most Domestic And Imported 2/4WD Vehicle.
  • Come With Blow Molded Carrying Case Replacement for Convenient Storage And Carrying.
Check Stock

WISPAUSU Air Brake Caliper Piston Compression Tool Kit 23PCS Pneumatic Brake Pump Adjusting Wind Back Tool Brake Caliper Piston Rewind Tool

  • Air Brake Caliper Tool - 23PCS Pneumatic Brake Caliper Wind Back Tool Kit, perfect for Brake DIY Enthusiasts or Mechanics. Easy to rewind your brake caliper piston with the Pneumatic Caliper Piston Compressor Tool..
  • Easy to Use - The tool attachs the adapter quickly and firmly by its magnetic plate. Easy to turned the windling handle 360-degree clockwise anticlockwise. Press its button to quick release pressure..
  • What You Get - 1pcs air operated brake compressor tool, 22pcs adapters that fit to the piston, and 1PCS hard plastic suitcase. Made of high carbon-steel..
  • Wide Applications - Adapters compatible with most vehicles, such as Alfa Romeo Audi BMW Citroen Dacia Fiat Ford GM Honda Hyundai Iveco Jaguar Lancia Mazda Mercedes Mini Mitsubishi Nissan Opel Peugeot Renault Saab Seat Skoda Suzuki Toyota Vauxhall Volvo VW, etc..
  • 1 Year Warranty - We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

A-Premium Disc Brake Caliper Assembly with Bracket Compatible with Toyota Sienna 2004-2010 Rear Left and Right 2-Pcs Set

  • 【Vehicle Fitment】Compatible with Toyota Sienna 2004-2006(3.3L), 2007-2010(3.5L)---with 4 Wheel Disc Brakes---(Rear Left and Right, Driver and Passenger Side).
  • 【Reference Number】4772228010, 4775028270, 47750-28270, 47722-28010, 19-B2873, 19B2873, 19-P2873, FRC11565C, 4772128020, 47721-28020, 4773028270, 47730-28270, 19-B2873, 19B2873, 19-P2873, FRC11565C.
  • 【Specification】Inlet Port Size: M10 x 1.0.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Bracket, Steel Piston, Installation Hardwares. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
Check Stock

M MATI Rear Left Right Brake Calipers for Polaris RZR 1000 XP/XP 4 High Lifter RS1 Ranger 900 Crew 2014 1912035 1912141 1912142

  • Manufacturer Part# 1912035 1912141 1912142 Replacement Part# 1912883 1912884.
  • Fitment: Fit for Polaris ▶ Ranger 900 Crew 2014 ▶ RZR 1000 XP 2014-2022 ▶ RZR 1000 XP High Lifter 2021-2022 ▶ RZR 1000 XP 4 2014-2022 Except Turbo or Pro Edition ▶ RZR 1000 XP 4 High Lifter 2021-2022 Except Turbo or Pro Edition ▶ RZR RS1 2018-2021.
  • Feature: This is rear brake calipers replacement for Polaris OEM 1912035 1912141 1912142. Upgraded 1.375 piston replace stock 1.188/1 pistion. With brake pads, mouting brackets, banjos & bleeders, direct install..
  • Material: Precise alloy piston and anti-ageing seal kit make the caliper have more braking force and longer operation life..
  • Service:If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
Check Stock

Left & Right Front Brake Calipers & Pads Sintered for Polaris RZR 4 800 900 1000 Ranger 500 570 700 800 900 Diesel Brutus GEM

  • Manufacturer Part# 1912480 1912478 1912479.
  • Fitment: Fit for Polaris ▶ RZR TURBO 4 2019 ▶ RZR TURBO S 2020-2021▶ RZR XP TURBO 2016-2021▶ RZR XP 4 TURBO 2016-2021.
  • Feature: This is rear brake calipers replacement for Polaris OEM 1912480 1912478 1912479. Upgraded 1.375 piston replace stock 1.188/1 pistion. With brake pads, mouting brackets, banjos & bleeders, direct install..
  • Material: Precise alloy piston and anti-ageing seal kit make the caliper have more braking force and longer operation life..
  • Service:If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
Check Stock

A-Premium Disc Brake Caliper Assembly Compatible with Chrysler Town Country Voyager Dodge Caravan Grand Caravan 2000-2007 Rear Left or Right Side

  • 【Vehicle Fitment】Compatible with Chrysler Town & Country / Voyager 2000-2007.
  • Dodge Caravan / Grand Caravan 2000-2007 (Rear Left or Right Wheel).
  • 【Specification】Brake Piston Count: 1 Piston.
  • The Brake Calipers are coated with antirust coating, which can effectively prolong the service life..
  • 【Directly Fit】OE Replacement Brand New Brake Caliper Assembly, including Brake Caliper, Phenolic Piston. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time..
  • 【Reference Number】5019808AA, 5003891AB, 18-4774.
Check Stock