Top Cadence Bluetooth Headphones Reviews

CYCPLUS Cycling Speed and Cadence Sensor Bluetooth & ANT+ Wireless Bike Cadence Sensor Speed IP67 Waterproof- C3 X 2

SPEED SENSOR & CADENCE SENSOR- Package include: 2 pcs speed &cadence, you can use the speed and cadence sensor at the same time..
BLUETOOTH & ANT+ MULTI-PROTOCOL: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+.
ULTRA SMALL DESIGN & LONG ENDURANCE: SIZE only 38mm×29.5mm×9.5mm & WEIGHT only 9.2g. Not affect bike appearance and increase cycling burden.300 hours using time & 300 days standby time. It will enter the SLEEP MODE when not in motion..
DUAL-MODE SENSOR: Quickly switch between cadence and speed sensor modes by toggling switch to different position..
EASY INSTALLATION: Easily attach to your bike with included ELASTIC and DOUBLE-SIDED TAPE, no magnet or calibration needed. Excelsior quality and innovative design help you ride scientifically and healthily. Mounts to any bike's wheel hub, these sensors are easy to install, maintain and move between bikes..

Check Stock

XOSS X1 Bike Speed and Cadence Sensor Speedometer Bicycle ANT+ Bluetooth 4.0 Wireless Cycle Computer (2 Pack)

【DUAL MODE OF SPEED AND CADENCE】Just switch mode between speed or cadence by reinstalling the battery. Each individual sensor can process either speed or cadence but not both at the same time. If you want both data, please buy two pack of sensors. THERE ARE TWO PACK OF SENSORS IN THE PACKAGE..
【SUPPORT ANT+ & BLUETOOTH 4.0】Sensors are compatible with all devices that support ANT+ protocol, such as Garmin, Bryton, XOSS G+ and other bike computers. It supports Bluetooth connection with mobile phone apps such as Openrider and cycling trainer apps such as Zwift, Tacx and Bkool. There are compatibility differences between Android and iOS. DUE TO APPS UPDATE, THERE IS ALL OR PARTIAL INCOMPATIBILITY IN THE APPS NOT MENTIONED..
【SUPPORTS DUAL PROTOCOL CONNECTION】A sensor can connect with mobile APP and Ant+ devices and record data at the same time. PLEASE DO NOT CONNECT SENSORS IN THE PHONE BLUETOOTH SETTINGS..
【IP67,400HRS BATTERY LIFE, 10g, EASY TO INSTALL】No matter the weather, long battery life, light weight, they mean happier riding. The speedometer is mounted on the wheel hub and the cadence sensor is mounted on the crank. There are two sizes of rubber bands in the package, suitable for a variety of bicycle sizes..

Check Stock

iGPSPORT Bike Speed Sensor or Cadence Sensor for iPhone Android Bike Computer SmartWatch Compatible with ANT+ and Bluebooth

Include a speed sensor and cadence sensor.Capture cycling cadence and speed data on any bike computer(Required ANT+) via ANT+ or training APP in mobile via Bluetooth.
Easy to install, maintain and move between bikes - NO Magnets. Speed sensor mounts to any bike's wheel hub. Cadence sensor easily attaches to your bike's crank arm.
ANT+ and Bluetooth: Compatible with any ANT+ equipment such as Garmin,Bryton,Polar,Wahoo,iGPSPORT bike computer and more.
Compatible with most of mainstream training APP (via Bluetooth) ,such as Wahoo fitness,iGPSPORT,Zwift,Runtastic Road Bike and many more.
Long battery life: Normal use for a year(one hour per day).

Check Stock

XOSS X1 Speed Cadence Sensor Wireless Bike Speedometer Power Meter Bike Trainer Bike Computer Use Indoor Outdoor Bike Use Zwift Peleton OpenRider- 1 Pack

【Dual mode of speed and cadence】You can switch the mode between speed or cadence by simply reinstalling the battery.The red light is speed mode and the blue light is cadence mode.The indicator light only flashes when the mode is just switched, not always on..
【Support ANT+ & BLUETOOTH 4.0】XOSS Sensors are compatible with all devices that support ANT+ protocol, such as Garmin, Bryton, XOSS G+ and other bike computers. And supports Bluetooth connection with apps like Openrider and bike trainer apps like Zwift, Tacx and Bkool.(Please ask the technical support of your APP and ANT+ device to confirm if it is compatible.).
【Powerful XOSS APP Support】XOSS cadence sensor are supported by the powerful XOSS APP with accurate data and are also compatible with most fitness APP. Note: The cadence and speed sensors cannot be used with the XOSS Bike Computer and XOSS APP for indoor training, it can be used outdoors..
【Waterproof and light, easy to install】IP67 level waterproof,you can ride when rain day. Only 10g, very light and easy to carry.Please check the tutorial video on the product detail page.Please watch FAQ below for additional notes before purchasing, and feel free to contact us with questions..

Check Stock

Magene S3 Cadence/Speed Sensor

[Battery] Remove the insulating sheet of the pre-installed battery before usage.
re-install the battery to switch between the speed and cadence mode..
[Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for....
[Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently.
When using ANT+ protocol it can be connected to....
[Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is....
[Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY....

Check Stock

MEILAN Oval GPS Bike Computer and C3 Speed and Cedence Sensor

...y GPS chip, It supports three systems: Beidou, GPS and GLONASS, fast global positioning, real-time tracking distance and speed, and record the cycling track automatically..
【Speed and Cadence 2 in 1】Accurately track speed, cadence and distance in real time, and transmit it to your smartphone or bike computer via Bluetooth..
【Compatible with Bike Computer and Sport Watch via BLUETOOTH 4.0】C3 speed and cadence sensor only supports Bluetooth connection, and can be compatible with bike computers and sports watches. C3 does not support devices compatible with the ANT+ protocol, such as Garmin, Bryton, etc..
【Work with Zwift for indoor trainer】 C3 works with most bikes and frame sizes, It can be used for indoor training with most bikes which is inserted into the indoor trainer platforms. Capture speed and cadence on your favorite indoor cycling platform and display on your phone or PC via Zwift app. Unsuitable installation notice: Some bikes have large flat fork spans, or most indoor bicycles, spinning, and the trainer, which is not suitable for installing this product..
【2.4 inch large screen & Full screen backlight】Oval uses a full-screen backlight and anti-dazzling design with a 2.4-inch large screen display, allowing you to clearly view the....

Check Stock

LIVLOV V4 Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Wireless Bicycle Cadence Sensor IP67 Waterproof for Zwift Elite HRV Endomondo Peloton Bike Computers

【BLUETOOTH & ANT+ DUAL-PROTOCOL】Use the LIVLOV V4 sensor to accurately track your cycling cadence in real-time. Connect the cadence sensor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth..
【WIDE COMPATIBILITY】The RPM cadence sensor is compatible with most mainstream iOS and Android fitness apps: Zwift, TrainerRoad, Rouvy, Cyclemeter, Openrider, Tacx, RideWithGPS, Peloton, etc. If you want to confirm compatibility with your app, please send us a message on Amazon..
【LIGHTWEIGHT and EASY to INSTALL】Size only 38.5mm×38mm×12mm & weight only 10.5g. No magnets, wireless sensor, it can be easily attached to your bike’s crank arm or shoes through the included rubber-elastic rings and double-sided tape..
【BUILD QUALITY】V4 cadence sensor is waterproof, sweatproof and dustproof. Built-in replaceable CR2032 button battery, battery life up to 500 hours / wireless signal strength up to 20 feet. Easy to replace, use the coin to unscrew and replace the battery. Please remember to remove the battery insulation sheet before installation..
【NOTE】Remove the insulating sheet of the pre-installed battery before usage, re-install the battery to switch between the speed and cadence mode. Unlimited cadence se....

Check Stock

moofit Cadence Sensor Bluetooth/ANT+ IP67 Waterproof Wireless RPM Cycling Spin Bike Cadence Sensor for Wahoo/Zwift/OpenRider/Endomondo/TacX/TrainerRoad (MooFit app Unavailable)

BLE 4.0 & ANT + TECHNOLOGY -Connect the cadence sensor to your bike computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth..
REAL-TIME DATA -Tracking cadence data in real-time on your bike computer or smartphone with compatible training apps..
EASY TO INSTALL -NO magnets needed, the Bluetooth / ant+ cadence sensor attaches to your bike’s crank arm..
IP67 WATERPROOF -You can cycling with the cycling cadence sensor even on rainy days, enjoy your cycling every day in all weather..
WIDELY COMPATIBLE -The cycling sensor campatible with most of mainstream fitness APPs, such as Wahoo Fitness, Zwift, Endomondo, E-lite HRV, Uhr, RideWithGPS, Cyclemeter, Peloton(only support iOS version), Openrider, etc..

Check Stock

Magene Outdoor Speed/Cadence Sensor for Cycling, Wireless Bluetooth/Ant+ Bike Computer RPM Sensor, Compatible with Wahoo Fitness, Strava

[Battery] Remove the insulating sheet of the pre-installed battery before usage.
re-install the battery to switch between the speed and cadence mode..
[Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for cadence).
[Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently.
When using ANT+ protocol it can be connected to multiple devices at the same time..
[Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid..
[Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up..

Check Stock

MOOFIT Speed/Cadence Sensor,ANT+ Bluetooth Cycling Cadence Sensor,Wireless RPM Sensor for Bicycle or Spin Bike,IP67 Speed and Cadence Sensor Compatible with Wahoo, Zwift, Strava,Openrider,Peloton

✅Effective Tracking: Moofit 2nd generation cadence sensor helps track and caputer real-time cycling cadence/speed date effectively.Built-in with reliable geomagnetic and upgraded chips for enhanced RPM cadence or speed date accuracy..
✅ANT+&Bluetooth Dual Protocol: ANT+&BLE Dual-Modes Technology enables the bike cadence sensor to be connected with bike computer,cycling apps,fitness equipment and smart watch..
✅Third-party App Compatible : Moofit Cycling cadence sensor compatible with most popular cycling apps such as Wahoo fitness, Zwift, Rouvy, Peloton, Cyclemeter,Openrider,TrainerRoad,CoospoRide,etc..
✅Speed or Cdence Mode: Re-install the battery to switch the speed and RPM cadence mode.Red light indicates speed mode,Blue light indicates cadence mode.You can not use speed and cadence sensor at the same time..
✅Magnet-less, Lightweight: Weighs only 8g,with no magnets or other exposed parts to line up, these wireless cadence sensor are easy to install to your crank arm or bike hub..

Check Stock

XOSS Vortex Cadence and Speed Sensor Wireless IPX7 Waterproof - 300 Hours Dual Modes Bike Sensor ANT+/Bluetooth 4.0 Compatible for Cycling Computer

【Attention】The VORTEX speed & cadence sensor support connecting with your indoor training APP to record indoor cycling data..
【Speed & Cadence Dual Mode】XOSS VORTEX Cycling sensor can be used in two modes: Speed/Cadence Mode. Connects Through ANT+/Bluetooth, You can fast switch mode via XOSS APP anytime you want. VORTEX also compatible with other devices, you can consult us for details *To get both speed and cadence data, you need to install two sensors. Only one mode is available at the same time..
【Accurate Data & XOSS APP Support】Through VORTEX speed and cadence sensor, your cycling data is more accurate than GPS. Real cadence in real-time to pace your cycling on XOSS bike computer and XOSS App. Measure range: Cadence max 250RPM/Speed max 85KM/H..
【New Design】The shell of the XOSS VORTEX bike sensor uses a spiral trapezoid shape which not only fits better to the surface of the crank and hub but also conforms better to the principles of aerodynamic design and The sense of speed of riding..
【IPX7 Waterproof】Prevent water and dust, make your riding better and better in extreme weather..

Check Stock

iGPSPORT Bike Cadence Sensor CAD70 for Cycling Computer with Dual Module Bluetooth and ANT+

✔ Capture cycling cadence data from bike computer via ANT+ or from training APP in mobile via Bluetooth.
✔ Easy to install, maintain and move between bikes - No magnets. Cadence sensor easily attaches to your bike's crank arm.
✔ ANT+ and Bluetooth: Compatible with any ANT+ equipment such as Garmin,Bryton,Polar,Wahoo,iGPSPORT bike computer and more.
✔ Compatible with most of mainstream training APP (via Bluetooth) ,such as Wahoo fitness,iGPSPORT,Zwift,Runtastic Road Bike and many more.
✔ Long battery life: Normal use for a year(one hour per day).

Check Stock

CYCPLUS Bike Computer Set Include Speed Sensor and Mount Wireless Bicycle Speedometer Odometer Waterproof ANT+ Bluetooth MTB Tracker

【Dynamic GPS Positioning】Higher sensitivity, Higher accuracy, Faster positioning. The navigating chip is imported from Switzerland. The GPS signal tracks your route. After connecting to your phone with bluetooth, your journey is synchronized with the app, so you can see exactly which route you've taken for your ride..
【2.9-inch Screen】The glare-free backlit screen introduces FSTN technology, which is highly visible in sunlight. The LCD screen will light up automatically which depending on the sunrise and sunset time in different time zones. You can read your data easier and clearer day or night. High quality tempered glass, do not worry about nails scratches the screen. (Note: When using the product for the first time, be sure to set the time zone first. And then all functions can be run normally.).
【ANT+ Sync Sensor and App】It supports simultaneous recording of various data such as speed, cadence, heart rate, power, route traveled, altitude, etc. Strava account can be added via our APP to synchronize the data on cycling computer. Helps you monitor workout data and gives you scientific training experience. (Search for "XOSS" in the Google Play Store or Apple App Store to download the app).
【SPEED SENSOR & CADENCE SENSOR】The bike comp....

Check Stock