Top Cable Railing Kits Reviews

Muzata 45KN Upgraded Custom Hydraulic Hand Crimper Tool for 1/8\ Stainless Steel Cable Railing Kit Hardware Wire Rope Swaging 1Pair Dies with Wire Cable Cutter CR09 CK12, CT1

  • Custom Designed for Stainless Steel -- This hydraulic crimper tool is forged and custom-designed to provide 45KN of crimping force, making it perfect for crimping the stainless steel cable railing kits that require more strength and power. The blade of the cable cutter CR12 is quite sharp and durable. It can make exact and clean cuts up to 5/32" stainless steel cable. Package includes: 1pc hydraulic crimper, 1pair of 1/8'' crimping dies, 1pc cable cutter.
  • Simple to Use -- The crimper is designed with an oil switch knob to control the pressure when you swage. The comfortable ergonomic cushioned handle makes it easy to grip and control. Please note that the knob requires an excess of power to be fully tightened. When you find the crimper could not provide enough pressure, please check the knob and make sure it is fully tightened or need further tightening up.
  • Wide Applications -- This Muzata crimper CR09 fits 1/8" cable railing kits. It also matches regular crimping dies to crimp aluminum ferrules or copper products. We Have Upgraded This Crimper to Resolve the Problems Like Broken Head or Leaking Oil after Repeated Crimping. If You Encounter Situations Like This, Please Reach Us.
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to h....
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Brushed Stainless Steel Wood Concrete Level Deck PS02 LH4S

  • Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be....
Check Stock

Muzata 30 45 90 Degree Multi-Angle Drill Guide with Drill Bits Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight Angle Corner Hole Lag Screw for Wood Post CT21, CT1 PG1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes, 30 and 45 degree angle holes for the wood post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with it. Package includes: 1pc drill guide, 1pc allen wrench, 3pcs set screws, 1pc blowing dust ball, 4 sizes of drill bits：3/16”,9/32”, 5/16”,13/32”.
  • Various hole sizes and Portable- This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 9/32”, 5/16”, 13/32” drill bit), which are compatible with most cable railing kits hardware. The hole drilled by 5/16’’ drill fit most 1/8″ cable railings lag screws. This drill guide for cable railing is light and small pocket carrying, compact, and easy to carry.
  • Visible and Easy Operate – The handrail drill guide is made of transparent acrylic with excellent visibility that you are easy to lock your selected position on the decking wood post. The fixing metal sleeve of the desired size can be replaced by adjusting the set screw. Use with the attached F clamp and 4 Sizes of drill bits to ensure steady drilling and precise angles.
  • Pre-Designed System – We pre-design....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Black Finish Stainless Steel Wood Concrete Level Deck PS02 BH4S

  • Key feature - This square cable railing post (black finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be d....
Check Stock

Muzata 40Pack 1/8 Swageless Cable Railing Kit Invisible Terminal Fixed End Toggle Anchor for Metal Post Angle Adjustable T316 Stainless Steel Stair Deck Corner CB17 CV2 CL1

  • Completely Invisible & Multi-angle - Muzata cable railing kit fixed end CB17 works for 1/8" wire rope. It can be easily stuck and completely hidden inside the METAL posts to get a neat appearance. The multi-angle feature enables the toggle anchor terminal to rotate from 0-180 degrees. Note: this cable railing kit ONLY work as a fixed end, it need to work with a tensioner to construct a cable run.
  • ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:40packs terminals.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner & Wall Post Solution - With a well-designed compact body, you could use two invisible toggle anchor terminals CB17 at one corner METAL post of 2”x2” to 10”x10”, and they won't hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind....
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • ...to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail projects. It can work with 6” woodworking F clamp and C clamp for no shaking and safer drilling..
  • This drill guide for straight holes is a part of our cable railing system, we have everything n....
Check Stock

Muzata 20Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 20packs angle sleeves, 20packs adhesive sleeves, 40pcs adhesives, 1pc drill bit(9/32")..
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pr....
Check Stock

Muzata 10Pack Invisible Cable Railing Kit 1/8 Swageless Terminal Flat Head Hidden for 2 x2 Metal Post Deck Stairs NiceView System CB06,CV2 CL1

  • ...05. 30 degree angled washer Muzata CR60 is needed for stair installation. Package includes: 10 packs terminals,1pc allen wrench.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a NiceView cable railing system to help you get a fully customized project, including cable railing kits CB05 CB06 CB17, protector sleeves CR72 CR66, angled washer CR60, stainless steel cable WR02, cable cutter CR12, socket wrench CT16,posts PS01 PS02, handrails HT10, handrail connectors (HA01 HA02 HA23 HA24. (Please note that package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
Check Stock

Muzata 4Pack Cable Railing Post 42''x2''x2'' (Post Body 41'') Flat Top Level-drilled Post Stainless Steel Black Finish Top Mount Wood Concrete Level Deck, PS02 BH4L

  • Key feature – This square cable railing post (black finish) is designed for 42″ commercial cable railing projects. It is pre-drilled with 12 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Muzata invisible cable railing kit series is recommended to work with this post. Plz search Muzata CV2.
  • Weather protection – This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PM05 to find the aluminum cable railing posts.
  • Code Compliance – This structural square post is designed with 3″ cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4″ sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 to find slice stabilizer posts to get a broader view. It is important to consult local building offices about the rules....
Check Stock